Page 1 of 2
RS2 dynoplot
Posted: Mon Jan 10, 2005 11:22 am
by Pete_RS2
I put my RS2 on the rolling road at the weekend. As far as I know it's stock apart from Jetex Panel filter and S3 DV.
RE: RS2 dynoplot
Posted: Mon Jan 10, 2005 11:55 am
by alastairg
Excellent result. I am sure its standard as the plot curves look very similar to mine ( will scan and post ASAP). Only thought is a stage 1 MTM chip
http://www.qstuning.com/list_for_car.asp?car=rs2 .
The RS2 engines were all verified/dyno tested re stated output by porsche so you should expect at least on paper outputs and more with older cared for engines.
Now for a remap eh ?
RE: RS2 dynoplot
Posted: Mon Jan 10, 2005 2:06 pm
by Pete_RS2
I'm sure it's standard too. Mihnea has a theory that '95 cars had more power than '94 cars....
Yes I'll be having it remapped for the S2Forum Bristol RR shootout.
RE: RS2 dynoplot
Posted: Mon Jan 10, 2005 2:54 pm
by Doug_S2
Those QST prices scare me!
Is the torque curve not meant to stay more flat? Has it been samco'ed and tested Pete?
Posted: Mon Jan 10, 2005 10:02 pm
by S4driver
Nice figures there Pete. Excellent. Whats Miks theory behind the '95 cars then?
My Rs had 311bhp prior to mapping when Amd tested it - and came back with 359bhp....Can't remember when mine was registered, pretty sure it was a '94/M.
Re: RE: RS2 dynoplot
Posted: Tue Jan 11, 2005 10:48 am
by Pete_RS2
Doug_S2 wrote:Those QST prices scare me!
Is the torque curve not meant to stay more flat? Has it been samco'ed and tested Pete?
I think the torque curve looks healthy enough in line with boost peaking at ~4k rpm ? Don't forget boost drops off towards the red line anyway so you wouldn't expect it to be too flat.
I plan to fit the Samco's & leak test at Greg's garage meet next month.
If it had a leak though I doubt the figures would have been so good.
S4driver wrote:Nice figures there Pete. Excellent. Whats Miks theory behind the '95 cars then?
My Rs had 311bhp prior to mapping when Amd tested it - and came back with 359bhp....Can't remember when mine was registered, pretty sure it was a '94/M.
He reckons none of the 94MY cars achieved the claimed figures so Audi changed the ECU for 95MY cars.
Re: RE: RS2 dynoplot
Posted: Tue Jan 11, 2005 11:12 am
by alastairg
Doug_S2 wrote:Those QST prices scare me!
Is the torque curve not meant to stay more flat? Has it been samco'ed and tested Pete?
I have to agree with Doug. I have just looked at mine again. Begins plateau @ 3300rpm, flatish from there and tails post 5000rpm. Peak torque 338.6 @ 3726 rpm
Peak power 315.5 @ 4981 rpm and holds past 6000rpm
Will try to scan and post today
RS2 AMD plots
Posted: Tue Jan 11, 2005 3:38 pm
by alastairg
At last the plots from AMD 030804. Standard car however all following done prior to testing i.e. Air filter Fuel filter DV WGFV/N75 (MAF/sparks within previous 12 months)
Posted: Tue Jan 11, 2005 3:55 pm
by alastairg
I will try again Its a .tif opening with msoft photo editor
Posted: Tue Jan 11, 2005 4:01 pm
by alastairg
Help
Posted: Tue Jan 11, 2005 4:10 pm
by Pete_RS2
alastairg wrote:Help
LOL. Can you save it as a JPEG file ? That's what mine is.
Posted: Tue Jan 11, 2005 5:02 pm
by alastairg
.tif is an allowed file type and all our scanner will do at work.
Posted: Tue Jan 11, 2005 6:19 pm
by Doug_S2
Open the tif in paint and save as jpeg, then post?
Posted: Tue Jan 11, 2005 7:14 pm
by alastairg
Again Managed to get scanner to produce jpg. Quality not great despite max settings
Posted: Tue Jan 11, 2005 7:18 pm
by alastairg
Correction
they are huge I am off for a lie down
