RS2 rear wheel clearance?

2.2 I5 20v turbo - 315 bhp
Post Reply
User avatar
hiltron
1st Gear
Posts: 66
Joined: Wed Mar 31, 2004 2:45 pm
Location: Cape Town, South Africa

RS2 rear wheel clearance?

Post by hiltron » Tue May 04, 2004 4:27 pm

Hi everyone.
The other day I noticed from behind that my RS2 slanted slightly to one side. I measured the distance from the centre of the rim to the under edge of the fender and found a difference of 20mm, between left and right. What distance do you guys get? I dont know if maybe my spring has sagged or could it be something else worn?
Any tips or measurements would be great.
95. RS2 RHDrive. Polar Silver. Stock Standard
Top
User avatar
hiltron
1st Gear
Posts: 66
Joined: Wed Mar 31, 2004 2:45 pm
Location: Cape Town, South Africa

Post by hiltron » Tue May 04, 2004 5:05 pm

Just went to measure mine. 360mm left. 340mm right side.
95. RS2 RHDrive. Polar Silver. Stock Standard
Top
User avatar
alastairg
4th Gear
Posts: 583
Joined: Fri Mar 26, 2004 10:36 am

Post by alastairg » Tue May 04, 2004 8:41 pm

:oops: tyre pressures????
Top
User avatar
hiltron
1st Gear
Posts: 66
Joined: Wed Mar 31, 2004 2:45 pm
Location: Cape Town, South Africa

Post by hiltron » Wed May 05, 2004 1:01 pm

Nope!! Tyre pressure perfect. Measurement from fender to rim. Tyre has no influence. I climbed under the car and measured coils under load. About 10mm difference. Must be coil.
95. RS2 RHDrive. Polar Silver. Stock Standard
Top
Post Reply

Return to “RS2 (B4) 1994-1995”

Who is online

Users browsing this forum: No registered users and 74 guests