Well we came home with the RS2 today....

2.2 I5 20v turbo - 315 bhp
goodridge
Neutral
Posts: 43
Joined: Sat Dec 29, 2007 12:10 am

Well we came home with the RS2 today....

Post by goodridge » Sun Apr 06, 2008 5:53 pm

The deal was done on the car today and we've just brought it home! I have a couple more questions for you guys though if you don't mind. It's got some non-standard wheels on it, which we've just found out are buckled. Whats the best replacements to get size and fitment wise? My mate was looking to change them anyway so not too worried. Also the car has the uprated brakes on it, what model are they from, think the guy said 968 clubsport? the rears need changing. Also there is excessive handbrake travel I'm hoping we can adjust up? I'll have a look when the discs are off? The auxiliary radiator has loads of fins missing, any ideas of best place for new item? I think we are going to do cambelt and all the auxiliary belts for piece of mind to. If any of you can help out with more info be greatly appreciated. Thanks

John

User avatar
DickyC
3rd Gear
Posts: 376
Joined: Fri Jun 22, 2007 9:12 pm
Location: Newbury, Berks

Post by DickyC » Sun Apr 06, 2008 6:31 pm

Yes, in theory the brakes are 968 CS, but in practice they are the source of endless exchanges on forums about Porsche part numbers because the Audi parts are so expensive. Endless exchanges and few firm answers, sadly.

However, if you pay the Audi prices the problems all go away at the same time. All your worries about the type and size and compatibilty plus all the agro go at a stroke. The handbrake, if it's set up correctly, works fine.

The best alternative, to my mind, is to go to VagParts for the upgrade to the drilled discs and big calipers. This may be what you've got already of course.

eBay for wheels? 17" 7J "Cups" (off the 964?). Then get them refurbed. I had mine done at Elite in Reading. Tom1 has only just had his done and will let you know who did his I feel sure.

I'll dig the history out and see where the previous owner had his rads recored.

All the best

Dicky C

User avatar
CliveH
Cruising
Posts: 4754
Joined: Sat Oct 02, 2004 12:07 pm
Location: Yorkshire, UK

Post by CliveH » Sun Apr 06, 2008 7:07 pm

Welcome and congratulations on your purchase :thumbs:

As Dicky said really.

It would be nice to get the OEM Porsche cup wheels (or replicas) back on.

As for the auxiliary radiator, just whip it out and bung up the hoses - my S2 (ABY) actually runs cooler without it!
Clive

S2 ABY coupe, S4 B5 saloon, S4 B6 avant
RS4 B7 phantom black saloon, mint, fully loaded, low mileage - FOR SALE!- http://www.rs246.com/index.php?name=PNp ... ic&t=88981
S8 D2 facelift, RS6 C5 saloon, both gone but not forgotten

goodridge
Neutral
Posts: 43
Joined: Sat Dec 29, 2007 12:10 am

Post by goodridge » Sun Apr 06, 2008 7:37 pm

Cheers guys. For wheel upgrages, will 18's fit nicely or not? We have been looking at the Porsche turbo's in 8x17 et47 which would then take the correct 225/45 17 rubber, but wonder if 18's will go without issues?

User avatar
CliveH
Cruising
Posts: 4754
Joined: Sat Oct 02, 2004 12:07 pm
Location: Yorkshire, UK

Post by CliveH » Sun Apr 06, 2008 7:51 pm

Yes, 18s will fit fine - just make sure you get the correct ET and stud pattern (PCD)
Clive

S2 ABY coupe, S4 B5 saloon, S4 B6 avant
RS4 B7 phantom black saloon, mint, fully loaded, low mileage - FOR SALE!- http://www.rs246.com/index.php?name=PNp ... ic&t=88981
S8 D2 facelift, RS6 C5 saloon, both gone but not forgotten

goodridge
Neutral
Posts: 43
Joined: Sat Dec 29, 2007 12:10 am

Post by goodridge » Sun Apr 06, 2008 8:12 pm

Sweet Clive thanks. Here is the car my mate bought today, does anyone know it ?

John

Image

Image

Image

User avatar
CliveH
Cruising
Posts: 4754
Joined: Sat Oct 02, 2004 12:07 pm
Location: Yorkshire, UK

Post by CliveH » Sun Apr 06, 2008 8:17 pm

Looks familiar - was the previous owner on S2forum?
Clive

S2 ABY coupe, S4 B5 saloon, S4 B6 avant
RS4 B7 phantom black saloon, mint, fully loaded, low mileage - FOR SALE!- http://www.rs246.com/index.php?name=PNp ... ic&t=88981
S8 D2 facelift, RS6 C5 saloon, both gone but not forgotten

goodridge
Neutral
Posts: 43
Joined: Sat Dec 29, 2007 12:10 am

Post by goodridge » Sun Apr 06, 2008 8:26 pm

CliveH wrote:Looks familiar - was the previous owner on S2forum?
Not sure, last 4 stamps in book are from a Clive Sutton Motorsport?

User avatar
s4sturge
1st Gear
Posts: 59
Joined: Mon Nov 27, 2006 8:48 pm

Post by s4sturge » Sun Apr 06, 2008 10:24 pm

If you have no joy with looking for heels, try Simon Butterworth at Porshce-apart. They should be able to source and provide refurbed genuine 7x17" wheels. Will probably take your old ones in P.ex too.

User avatar
DickyC
3rd Gear
Posts: 376
Joined: Fri Jun 22, 2007 9:12 pm
Location: Newbury, Berks

Post by DickyC » Mon Apr 07, 2008 12:00 pm

Also read Tom1's Wheel Refurb post as it has a bit about tyres. The long and short of it is: 225s not 245s.

Just going back to the brakes and the Porsche/Audi confusion, I bet if you had a 968 and went to Porsche for brake parts they'd ask you about the year and the VIN and your mum's co-op number. It's no wonder it's not straightforward.

User avatar
venetors2
Neutral
Posts: 44
Joined: Sat Feb 25, 2006 7:22 pm
Location: italy

Post by venetors2 » Mon Apr 07, 2008 1:00 pm

The issue about the Big Reds 322x32 front brakes it's always trendy......

Disc Brakes from Audi come for a ludicrous price.... about 400 euros each!!

I went for the 322x32 of the 964 3.6 liter Turbo payed them around 150 euros each
The difference it's that mines are one solid block and not rotor and holder in two pices like the Audi ones or 993 Porsche ones
Apart for that they're cross drilled and they work just perfectly.... far better then the originals 304mm

Calipers for Big Reds... the most convenient place for it it's EBay.de usually they are around 600/700 euros for the couple brand new

Stefano

P.S.
Handbrake.............. it's the worse piece of Porsche engineering in the RS2
It does'nt hold the car on a nrmal slope.... and that's very well known.
Spare parts for it again are very expensive

rs2315
2nd Gear
Posts: 149
Joined: Sat Jul 01, 2006 8:34 pm

Re: Well we came home with the RS2 today....

Post by rs2315 » Mon Apr 07, 2008 7:35 pm

goodridge wrote:The deal was done on the car today and we've just brought it home! I have a couple more questions for you guys though if you don't mind. It's got some non-standard wheels on it, which we've just found out are buckled. Whats the best replacements to get size and fitment wise? My mate was looking to change them anyway so not too worried. Also the car has the uprated brakes on it, what model are they from, think the guy said 968 clubsport? the rears need changing. Also there is excessive handbrake travel I'm hoping we can adjust up? I'll have a look when the discs are off? The auxiliary radiator has loads of fins missing, any ideas of best place for new item? I think we are going to do cambelt and all the auxiliary belts for piece of mind to. If any of you can help out with more info be greatly appreciated. Thanks

John

Aux radiator OE from Quattro Corner-Pete Reeves.
Very good price. Find him on s2 forum or his own site.
rs2315.

User avatar
venetors2
Neutral
Posts: 44
Joined: Sat Feb 25, 2006 7:22 pm
Location: italy

Post by venetors2 » Tue Apr 08, 2008 11:52 am

CliveH wrote: As for the auxiliary radiator, just whip it out and bung up the hoses - my S2 (ABY) actually runs cooler without it!
I'm worried that taking out the aux rad would not be the best hting to do in Italian summer......
IMHO if the thing it's fitted there must be a reason.

Stefano

goodridge
Neutral
Posts: 43
Joined: Sat Dec 29, 2007 12:10 am

Post by goodridge » Tue Apr 08, 2008 6:37 pm

In an Italian summer maybe not. But a few people over here have told me to just bin it

VaudiGR
3rd Gear
Posts: 373
Joined: Mon Aug 01, 2005 6:20 pm

Post by VaudiGR » Thu Apr 10, 2008 5:53 pm

for the handbrake,get the 2 cables that work with the rear pads of the drum of the handbrake(around 100euros both),then have the handbrake pads resurfaced and tighten everything up.Make it go up to 2 clicks to hold everything and that should last about a year before it needs tightening again.Mine has worked nicely,but in any case you never trust an RS2's handbrake...put in that gear...it needs it!

Post Reply

Return to “RS2 (B4) 1994-1995”

Who is online

Users browsing this forum: No registered users and 18 guests