Page 1 of 1
spacing the oem wheels ? what size spacers are...
Posted: Mon Apr 13, 2009 9:44 pm
by trichards
people getting away with to fill up the wheel arches without rubbing on stock tire size (255, 35, 18 )? think i have some 10 mil h&rs around here, but might be a bit big . opinions ??
RE: spacing the oem wheels ? what size spacers are...
Posted: Mon Apr 13, 2009 10:13 pm
by jimbo1234567
only use spacers if you are using different wheels with bigger offsetts otherwise theres no need
RE: spacing the oem wheels ? what size spacers are...
Posted: Mon Apr 13, 2009 11:21 pm
by Virdee Autos
10mm will be just fine. You can get away with 15mm if on stock suspension
Posted: Thu Apr 30, 2009 3:08 am
by roi354
Could someone explain to me why spacers are so hideously expensive please?
Can I not just get a set machined to suit and then buy adequate bolts?
Posted: Thu Apr 30, 2009 1:13 pm
by rhunter203
Try ESP. Basically you pay for what you get – from my experience!!!
Or I have a set of 15mm H&R for sale
Posted: Thu Apr 30, 2009 10:56 pm
by roi354
rhunter203 wrote:Try ESP. Basically you pay for what you get – from my experience!!!
I disagree, 2 well turned pieces of ali around 15mm thick should be a damn site cheaper than the price of the H&R spacers. Hubcentric only means they're the correct size for the hub and the wheel and don't put undue stress on the bolts. Its no more special than that.