Help! Still trying to replacing Head/side light bulbs!

2.7 V6 30v biturbo - 380 bhp
Post Reply
Nastypsychoboy
1st Gear
Posts: 50
Joined: Thu May 15, 2008 7:38 pm

Help! Still trying to replacing Head/side light bulbs!

Post by Nastypsychoboy » Thu Nov 13, 2008 3:14 pm

Hi everybody,

I need help! Im still trying to replace the headlight & side light bulbs on my B5 RS4 for some clear ones and i cant get the backs of the headlights off! ahhhhhh! & i wouldnt have thought it would be very difficult.

As i look at the back of the headlight there is a metal clip, undo that and the top of the plastic panel comes away but there isnt enough room to get to the bulbs, and there isnt enough room to open it completely.

Does anyone know if (or how) i have to remove the power supply clip to the headlights before removing the plastic panel? Or can anyone give me a description of how they've done it themselves.

Otherwise im gona have to admit defeat and take it somewhere, but i know once ive done it once it'll be alot easier to repeat.

When i've finally done it i'll post some piccies.

Any assistance is much appreciated! :?

bastos
1st Gear
Posts: 84
Joined: Sun Jun 08, 2008 4:09 pm
Location: Zürich

RE: Help! Still trying to replacing Head/side light bulbs!

Post by bastos » Thu Nov 13, 2008 3:55 pm

take the whole head lights off... only 3 screws...
i wanted to do mine... guess what... i bought the wrong bulbs... :dung:
good luck with yours... :)
volts

dont be hating.....

User avatar
TopBear
4th Gear
Posts: 924
Joined: Mon Jul 03, 2006 12:41 am
Location: Glasgow

RE: Help! Still trying to replacing Head/side light bulbs!

Post by TopBear » Thu Nov 13, 2008 5:02 pm

I agree with the previous poster, taking out the whole headlamp unit is the easiest way to get access and change the bulbs.
:blackrs4: B5 RS4, MRC Remap, Milltek, RS6\B7 Brakes, Black\Carbon

Nastypsychoboy
1st Gear
Posts: 50
Joined: Thu May 15, 2008 7:38 pm

RE: Help! Still trying to replacing Head/side light bulbs!

Post by Nastypsychoboy » Thu Nov 13, 2008 5:52 pm

Thanks for the replys, i tried this but to no avail, the two screws in the top of the headlight no probs but the bottom of the headlight seems to be held in by the bumper, it wasnt going anywhere easily and i really dont want to have to remove the bumper to change the headlight bulbs, but if thats the only way....... :bash:

PaulR
1st Gear
Posts: 78
Joined: Sat Jan 18, 2003 2:13 pm
Location: Bucks

RE: Help! Still trying to replacing Head/side light bulbs!

Post by PaulR » Thu Nov 13, 2008 6:07 pm

There's another screw at the bottom of the unit, on the inboard side. A bit fiddly to get to, and I have used a telescopic magnet to lift the screw once it's fully released. Finally, as I remember, there's a kind of spigot (I think that's the technical term) on the outside of the unit, that locates into the bumper, which needs careful maipulation to release.

...Paul.

Nastypsychoboy
1st Gear
Posts: 50
Joined: Thu May 15, 2008 7:38 pm

RE: Help! Still trying to replacing Head/side light bulbs!

Post by Nastypsychoboy » Thu Nov 13, 2008 6:44 pm

Ahhhhhhhh another screw! Thanks for the info Paul!

If at first u dont succeed............ give up and post ur problem on a forum! :jump_clap:

Post Reply

Return to “RS4 (B5 Typ 8D) 1999-2001”

Who is online

Users browsing this forum: No registered users and 76 guests