what do you think of H-sport sway kit

2.7 V6 30v biturbo - 380 bhp
Post Reply
User avatar
Durit
1st Gear
Posts: 93
Joined: Fri Mar 03, 2006 6:01 pm

what do you think of H-sport sway kit

Post by Durit » Fri Jun 13, 2008 9:36 am

hello

is anyone driving with H-sport 35/22 sway kit?

http://www.hotchkis.net/c-813-a4-quattro-96-02-b5.aspx

For those that track their A4/S4 often or want a much more aggressive feel when attacking a canyon road, Hotchkis Sport offers the Extreme Sport Sway Bar Set. With the rear adjustable, for fine tuning, turn-in is very crisp while the rear will rotate around tighter radius corners. This set uses a 35mm, tubular front bar and a 22mm, tubular, two-position rear bar. Included are replacement polyurethane bushings front and rear, bushing brackets front and rear along with 90-degree grease fittings front and rear. To strengthen the rear sub-frame area, H Sport developed a billet aluminum reinforcement bracket system which bolts easily from the sub-frame to a hard point on the chassis. All necessary hardware is included in the reinforcement kit.
Please note: This Kit Is Now Powder Coated Black
Rate increase over stock
Front: +60%
Rear: +140% & +169%


The H&R kit is 32/21... but i didn't find the rate increase, to compare.

What do you think about this kit

thank you

Laurent
RS4 mtm 460 "safety car", Milltek, Koni, Mov'it 6/380-4/322, teamDynamics wheels ------- S6 plus, mtm, H&R, Koni

I'm french (nobody's perfect) sorry for my bad English!

User avatar
shaky
1st Gear
Posts: 91
Joined: Sun Apr 15, 2007 12:56 pm
Location: Lincolnshire

RE: what do you think of H-sport sway kit

Post by shaky » Fri Jun 13, 2008 10:46 am

mikeyquattro has got one on order, which should be here any day!

I'm also awaiting some feedback from him before ordering a kit for myself
Misano Red | Miltek | Gutted Pre-Cats | MRC'd | B7 Front Brakes | GmbH Rears with DS2500's | Hotchkis ARB's | Phatbox - NOW SOLD

Replaced by : 2003 MRC'd 996TT

kiwi_rs4
Neutral
Posts: 20
Joined: Thu May 29, 2008 8:11 pm
Location: Auckland, NZ

Post by kiwi_rs4 » Fri Jun 13, 2008 10:52 am


andream88
3rd Gear
Posts: 462
Joined: Sun May 28, 2006 4:33 pm

Post by andream88 » Fri Jun 13, 2008 12:16 pm

Yes, i have them.
But i'm going to install them the next week together with a set of KW V3.

A friend of mine bought the same kit and has already installed it on the car:
- they are GREAT, huge improvement from stock bars. Very good quality construction, and low price.
I think everyone should go with them. :wink:

Bye

Post Reply

Return to “RS4 (B5 Typ 8D) 1999-2001”

Who is online

Users browsing this forum: No registered users and 61 guests