Page 1 of 1

Wheel Spacers

Posted: Sat Feb 09, 2008 10:49 am
by S25MRS
Can anyone tell me, if I were to fit 10mm wheel spacers to my RS4 (completely standard setup - wheels, susp, etc), would there be any adverse affect on handling or wheel bearings, etc?
Thinking about it to fill out the arches a tadge more - What do you think? - if anyone has any pics to let me see the 'after' affect of spacers, that would be really helpful - make sure it is how I imagine it looks :)
Also, if I were to go ahead, any recommendations on makes & longer bolts/cost please?
Thanks folks

RE: Wheel Spacers

Posted: Sat Feb 09, 2008 3:48 pm
by Newdub
Can sometimes affect the camber, but this can be rectified with a modification. You'll need to get longer wheel nuts too.

RE: Wheel Spacers

Posted: Sat Feb 09, 2008 10:53 pm
by Virdee Autos
I'm using 15mm spacers which are the proper hubcentric type.

Car looks superb. No adverse effects so far!!!

Edited to say stick with either H&R or Eibach IMO

Re: RE: Wheel Spacers

Posted: Sun Feb 10, 2008 1:41 am
by rs4raz
R33V-Spec wrote:I'm using 15mm spacers which are the proper hubcentric type.

Car looks superb. No adverse effects so far!!!
where is the best place to buy these spacers?

Edited to say stick with either H&R or Eibach IMO

RE: Re: RE: Wheel Spacers

Posted: Sun Feb 10, 2008 10:38 am
by nickelvery
I will getting some spacers soon to, I agree I think they will make the car have more of a pressence.

RE: Re: RE: Wheel Spacers

Posted: Sun Feb 10, 2008 4:55 pm
by S25MRS
Do the likes of H&R or Eibach also supply longer bolts to match aswell, or need to source these from elsewhere?
So, 10mm or 15mmm......mmmm?

RE: Re: RE: Wheel Spacers

Posted: Sun Feb 10, 2008 6:50 pm
by Virdee Autos
I bought my H&R items from Motorsport Tuning, and they had the longer bolts in stock.

Go 15mm IMO, looks perfect, and no rubbing even when fully loaded

Posted: Mon Feb 11, 2008 3:14 am
by rs4raz
can you use 15 mm spacers with gmbh suspension with oe alloys without any problems

Posted: Mon Feb 11, 2008 10:11 am
by jimbo1234567