RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

After yesterdays shinanagins time to get me a new flywheel and clutch, sorry about letting the side down yesterday but it really is bad and was slipping most of the way home,Kim Collins won the trophy for the fastest compition car on the day in the MTM RS6 (did anyone get footage of that show down against the Sportec RS550)
Cheers
Jr

are you getting the same set up as mine jr?

[img]images/graemlins/biggrin3.gif[/img]

After yesterdays shinanagins time to get me a new flywheel and clutch, sorry about letting the side down yesterday but it really is bad and was slipping most of the way home,Kim Collins won the trophy for the fastest compition car on the day in the MTM RS6 (did anyone get footage of that show down against the Sportec RS550)
Cheers


Jr

I thought that was weird as the Sportec one won.

Damn.. wish I had taken mine down now..

Would have been good to get the times.. I saw Kim but didn't introduce myself.. he looked busy!

Dave

Sorry,i might be a bit stupid [img]images/graemlins/062802beat_prv.gif[/img], but who is Kim Collins?
Is he a race driver? Does he work at MTM?
Why can I buy one of his exhausts? (Forum For Sale/Wanted)
Cheers [img]images/graemlins/beerchug.gif[/img]
Conti

Conti,
Kim ia the offical MTM distributor in the UK and his company is called QST, http://www.qstuning.com
take a look and see what he does.
Cheers
jr

Sorry to hear you had probs with the clutch JR. I know the feeling.

However a great opportunity to get one of the best mods available - the lightweight flywheel. I assume you're going for the Tanogo one. You will really notice the difference. [img]images/graemlins/biggrin3.gif[/img]

What sort of clutch are you going for?

Finally, I was there on Saturday but after finally deciding that I would do the time trial I arrived at the ticket office with S2_Driver only to find that it had closed for the day. Probably just as well though, after my "track record" [img]images/graemlins/1syellow1.gif[/img]

Thanks for that lesson, John! [img]images/graemlins/tung2.gif[/img]
Cheers [img]images/graemlins/beerchug.gif[/img]
cd

You might want to use this URL instead

QSTuning

expensive i guess! [img]images/graemlins/suicide.gif[/img] [img]images/graemlins/033102bad_1_prv.gif[/img]

It cost audi £2k to do mine as the stupid feckers put a standard clutch in a 450bhp car before they sold it to me, lasted 2 days (i was very enthusiastic when i bought it). they put the tanoga flywheel and MTM clutch in. launches well, bit of a dog to drive round town, but well worth it.

The best thing is it's only about few quid more than the Audi 1.

Riz - Where about up north are you from???

Sheffiled mate, down to road from you..... [img]images/graemlins/thumbs.gif[/img] [img]images/graemlins/tung2.gif[/img] off to hull tomorrow and then leeds [img]images/graemlins/033102bad_1_prv.gif[/img] fecking work! [img]images/graemlins/sekret.gif[/img]

whilst having my turbos replaced, I've also taken the opportunity to get a Tanoga flywheel and RS4 clutch fitted to my S4.

Today, after nearly 4 weeks, I finally get the car back and all seems to be well currently!

I was told there would be some increased noise with the new flywheel which there is at lower revs- especially third gear around 1500 revs (sounds like a tractor!) - some questions for those who have had the lightened flywheel mod: have you noticed the same? also, why is the noise more apparent in third gear?? Joshie/Prawn I think you've had this mod on your previous S4's..

I assume it is the same with the RS4's?

The noise problem concerns me as I'm having a lightened flywheel this week although not a Tanoga.......how can a flywheel make a noise!!!!!

Mog