My ride :)

[jsahlman]

I have a good sponsors

Thanks mam and dad

He gave me a good offer

I`m not sure witch chip he`s going to instal. He said that installation time depends on how long re-mapping take. That`s why I think he`s making those by himself. But I`m not sure.

[rs4-sson]

Your mum and dad are paying for your RS4 tuning!!! Holy skit man - what are you 18 or something????!!!

Not sure where you are based but remember that Dahlbäck are in Borlänge (the armpit of Sweden) Their prices are unacceptable, just plain stupid. No matter how rich you (or your folks are) - I personally do not like vendors pulling my pants down and shafting me good and proper...

Consider also Ace Competition in Borås and Tuning Chip in Stockholm.

[kiwi_mtm]

Sorry to say and dont take offence, but ditch those tail lights.

Great interior !

[Doc]

Sorry to say and dont take offence, but ditch those tail lights.

My thoughts precisely

[Mik]

I dont know Sweden, but what you are describing sounds just like Haywards Heath to me

Not sure where you are based but remember that Dahlbäck are in Borlänge (the armpit of Sweden) Their prices are unacceptable, just plain stupid. No matter how rich you (or your folks are) - I personally do not like vendors pulling my pants down and shafting me good and proper...

[jsahlman]

Jesus gues it was a joke.

I have to say that Dahlbäck gave me a best offer for that backage. And I`m living in Haparanda so thats nearest place to go. I have a autoparts shop In Finland so I dont need to pay VAT. And if you get a good discounts plus that you don`t have to VAT you will get a very good offer

That hole package will cost me allmoust same as your exhausts with installation

But I don`t complain, That`s life. Expensive

Chipcenter and AceCompetition are allso very good places but there are so far away.

Kit in Ace 425hk, 60000kr, flywheel and clutch 19500kr and installation 10200kr. So together 89700kr is 9655€

Kit in Dahlbäck 470hk, 87350kr, flywheel and clutch 18000kr and installation is 6000kr. Together 111350kr is 11986€

Allmost same parts but different prices. Dahlbäck`s exhaust is very expensive, He has HJS cat`s.

Here in Finland if you want cheapest you will take Ferrita`s or Milltek exhausts. Those are 3000-3500€. Installation is 250-400€. Flywheel and clutch are 1600€ and installation 650€. And then custom chip made in dyno is 800€. Together 6300-6950€.

[jsahlman]

Few new pictures from my trip

[img]modules/pnCPG/Coppermine/albums/userpics/13676/rs246_norm_120_2060.JPG[/img]

[img]modules/pnCPG/Coppermine/albums/userpics/13676/rs246_norm_120_2061.JPG[/img]

[img]modules/pnCPG/Coppermine/albums/userpics/13676/rs246_norm_120_2069.JPG[/img]

[img]modules/pnCPG/Coppermine/albums/userpics/13676/rs246_norm_120_2066.JPG[/img]

[jsahlman]

Someone was right

Chip was MTM
Flywheel is Dahlbäck`s own design and made by local company.
Clutch is Sacsh racing
Downpipes are own desing with HJS WRC cats
After cat pipe is Milltek product

Car feels grate. More power than original one
Clutch is firm and heavier than original. But strange way it feels much better.
No klonks and other weard sounds with this one-mass flywheel when driving low RPM`s

Exhaust is loud on high RPM`s and nice on low RPM`s.

Let`s see what next. Now only driving before I have to change winter tyres on.

[jsahlman]

Yesterday I installed new H&R sway-bars. Handling weels great. Much stiffer alltought I still have original springs and absorbers.

Poor winter tyres beacause we don`t have snow here

[jsahlman]

Maybe using these wheels next summer

[CliveH]

I'm sorry, but I just dont think any of those wheels suit your car. For me, it has to be the original RS4s or RS6s, they look good too. Anything else just looks too "boy-racerish".

I have to agree with the comments about the tail lights too.

[jsahlman]

[img]modules/pnCPG/Coppermine/albums/userpics/13676/rs246_norm_11.JPG[/img]

Ready for summer

[harry]

No

[jsahlman]

Jea , Right

[Särås]

Nice...

/J