Quattro/Recaro bucket seats
I'm not so sure it's a 60kg saving - the replacement seats (in GRP) might only be 6.5kg, but that excludes the mounting brackets, which are probably the same weight as the seats ????Jani wrote:Some 60 kilos advantage, if you fit both front seats with bucket seats.
Still, the corner support must be worth it for the track-day lovers

https://www.speedcams.co.uk
B5 2.7t S4 - gone
B5 2.7t RS4 - gone
Ed 30 Golf DSG - gone
A5 3.0tdi - gone within 12 months!
S3 2.0 tfsi - 6+ years, but now sold
2018 Golf R 7.5
B5 2.7t S4 - gone
B5 2.7t RS4 - gone
Ed 30 Golf DSG - gone
A5 3.0tdi - gone within 12 months!
S3 2.0 tfsi - 6+ years, but now sold
2018 Golf R 7.5
Hi John, I would like the embossed version like yours as well. However, Audi & Recaro HKG are not convinced that the seat has embossed RS4 logo on it. That is why I have been begging for a picture here for over a month, so that I can show them as proof.johneroberts wrote:No if your order from Quattro Gmbh that how they come as standard, stop tryin to find the cheaper way out Bem![]()
You either want them with the embost at £2000 each
Or just by the standard ones![]()
Cheers
jr
- johneroberts
- Cruising
- Posts: 4483
- Joined: Sun Dec 29, 2002 11:38 pm
- Location: Clent Hills
- Contact:
Digi cam not working at the moment so cant help until its fixedbem_ho wrote:Hi John, I would like the embossed version like yours as well. However, Audi & Recaro HKG are not convinced that the seat has embossed RS4 logo on it. That is why I have been begging for a picture here for over a month, so that I can show them as proof.johneroberts wrote:No if your order from Quattro Gmbh that how they come as standard, stop tryin to find the cheaper way out Bem![]()
You either want them with the embost at £2000 each
Or just by the standard ones![]()
Cheers
jr
sorry
jr

Driving is believing
RS246 Founder
This Audi brochure doesnt seem to show an embossed logo ?bem_ho wrote:Hi John, I would like the embossed version like yours as well. However, Audi & Recaro HKG are not convinced that the seat has embossed RS4 logo on it. That is why I have been begging for a picture here for over a month, so that I can show them as proof.johneroberts wrote:No if your order from Quattro Gmbh that how they come as standard, stop tryin to find the cheaper way out Bem![]()
You either want them with the embost at £2000 each
Or just by the standard ones![]()
Cheers
jr
[img]modules/pnCPG/Coppermine/albums/userpics/10003/sport_rs4_seats.jpg[/img][/url]
- johneroberts
- Cruising
- Posts: 4483
- Joined: Sun Dec 29, 2002 11:38 pm
- Location: Clent Hills
- Contact:
They do exist
[img]modules/pnCPG/Coppermine/albums/userpics/10003/rs246_norm_DSC00108.JPG[/img]
Got the digicam back yesterday
lots more in my gallery
Cheers
jr
Got the digicam back yesterday

lots more in my gallery
Cheers
jr

Driving is believing
RS246 Founder
I can't give you the part number, but it says in the Audi RS4 sport brochure that they cost 1500Euro each.
I really would choose a cheaper alternative!
I really would choose a cheaper alternative!
ADAC VOLKSWAGEN POLO CUP 2005
www.constantin-dressler.de
www.constantin-dressler.de
If you buy them via Recaro they are (I think) 200Euros cheaper. But JR mentioned something about different material....
ADAC VOLKSWAGEN POLO CUP 2005
www.constantin-dressler.de
www.constantin-dressler.de

OK boys... I took many months of research and finally went for the cheper version with no RS4 logo

I have the Quattro/Recaro racing shells WITH the RS4 logo on, BUT I have one more important question than if those shells have the RS4 logo or not.
I´m 186cm tall and even if I have those shells in the lowest position, it is still to high for me and I think for anyone in my size. I would need 2-3cm lower position.
When I spoke to Quattro GmbH about that, they didn´t know anything. When I asked MTM about that, they told me that there are two ways:
1st is to make another halls in those metal parts, which hold the shells but you have to cut them also otherwise the lower position won´t fit.
2nd is to order from Quattro GmbH those parts, which are already made for the lower position. Actually at MTM they were sure that Quattro GmbH has those parts. When I contacted Quattro about that, the didn´t know anything about that, AGAIN!
So my question is, has anyone done any of the two ways? Don´t tell me that this position is convenient for you gays.
JR, how tall are you? Are you sutisfied with the hight?
Nikolaos
I´m 186cm tall and even if I have those shells in the lowest position, it is still to high for me and I think for anyone in my size. I would need 2-3cm lower position.
When I spoke to Quattro GmbH about that, they didn´t know anything. When I asked MTM about that, they told me that there are two ways:
1st is to make another halls in those metal parts, which hold the shells but you have to cut them also otherwise the lower position won´t fit.
2nd is to order from Quattro GmbH those parts, which are already made for the lower position. Actually at MTM they were sure that Quattro GmbH has those parts. When I contacted Quattro about that, the didn´t know anything about that, AGAIN!

So my question is, has anyone done any of the two ways? Don´t tell me that this position is convenient for you gays.
JR, how tall are you? Are you sutisfied with the hight?
Nikolaos
The RS4 sedan project
Who is online
Users browsing this forum: No registered users and 51 guests