36mm LED festoons in mine.Virdee Autos wrote:What did you use for the no. plate lamps?
Bye Bye Yellow lights!
- Virdee Autos
- Trader (Expired)
- Posts: 2546
- Joined: Sun Jun 05, 2005 6:27 pm
CheeRS!
Virdee Autos ~ 07950-526592
Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |
Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |
Do the front sidelight LED's upset the 'bulb blown' warning system ? I was looking at these ones
http://www.ultraleds.co.uk/automotive-b ... 1_131.html
TIA
http://www.ultraleds.co.uk/automotive-b ... 1_131.html
TIA
No any warning signs in B5 for broken bulps =)
I used "second led from the left" in that pic to replace park light bulb. It´s Ba9S 9mm, and you just need to cut out another pin to make it fit in the socket.
That led has 6 bright leds on it.
I used "second led from the left" in that pic to replace park light bulb. It´s Ba9S 9mm, and you just need to cut out another pin to make it fit in the socket.
That led has 6 bright leds on it.
Who is online
Users browsing this forum: No registered users and 69 guests