I have a pair of 6 pot Alcons that I want to fit to my RS4 and I'm hoping to use B7 discs with them.
I need some pads and I'll obviously need someone to make up brackets to mount them.
Any ideas where I start???
I'm in East London if you can suggest anyone local.
Cheers,
Rob
Caliper help!!
-
Blue_Thunder
- Top Gear
- Posts: 1963
- Joined: Wed Nov 22, 2006 10:54 pm
- Location: UK - Liverpool
RE: Caliper help!!
ESP Engineering will be able to fabricate you some brackets. They did mine for me and they were spot on.
-
rsmonkey918
- 2nd Gear
- Posts: 219
- Joined: Thu Jun 28, 2007 8:17 am
- Location: Guildford/Exmouth
RE: Caliper help!!
ESP are the dogs danglies for this kind of thing and Liam is a real card! Suggest you leave your major credit cards at home as they also do some pretty tasty ....ahem... stainless upgrades.....
Regards
Steve
Regards
Steve
Steve
2000 X RS4 B5 Avus short shift, MTM/full Milltek to 460bhp, 19" Audi split rims/BBS CH's in anthracite, B7 front/rear big brake conversion, H&R ARB's/Bilstein PSS9's/ESP gearbox brace, retrofit RNS-E+Nav, ITG/MRC panel filter
2007 '07 Smart Brabus 101bhp, Bilsteins, Bentley Silverlake
2007 '56 Aprilia RSV Factory for some weekends
2004 '53 Honda Rune NRX1800 for other weekends
2000 X RS4 B5 Avus short shift, MTM/full Milltek to 460bhp, 19" Audi split rims/BBS CH's in anthracite, B7 front/rear big brake conversion, H&R ARB's/Bilstein PSS9's/ESP gearbox brace, retrofit RNS-E+Nav, ITG/MRC panel filter
2007 '07 Smart Brabus 101bhp, Bilsteins, Bentley Silverlake
2007 '56 Aprilia RSV Factory for some weekends
2004 '53 Honda Rune NRX1800 for other weekends
Who is online
Users browsing this forum: No registered users and 92 guests