MAP sensor upgrades...

2.7 V6 30v biturbo - 380 bhp
Post Reply
User avatar
dummi
4th Gear
Posts: 951
Joined: Tue Nov 29, 2005 1:34 pm
Location: birmingham

MAP sensor upgrades...

Post by dummi » Tue Jul 15, 2008 7:12 pm

on the bosch motorsport site there is a 4 bar MAP, iirc Dodgydave is using a 5 bar MAP sensor? either of these would be fine, the bosch motorsport one is pricey is there an alternative aftermarket one? TIA

gb
1st Gear
Posts: 53
Joined: Mon Jan 21, 2008 11:10 am
Location: Sydney, Australia

Post by gb » Wed Jul 16, 2008 12:44 pm

USD 98 from Vast Performance in the USA.

http://vastperformance.com/shop/product ... ucts_id=33
Regards,

GB from downunder

User avatar
TopBear
4th Gear
Posts: 924
Joined: Mon Jul 03, 2006 12:41 am
Location: Glasgow

Post by TopBear » Wed Jul 16, 2008 2:12 pm

gb wrote:USD 98 from Vast Performance in the USA.

http://vastperformance.com/shop/product ... ucts_id=33
That's a MAF sensor, not a MAP as discussed :wink:
:blackrs4: B5 RS4, MRC Remap, Milltek, RS6\B7 Brakes, Black\Carbon

gb
1st Gear
Posts: 53
Joined: Mon Jan 21, 2008 11:10 am
Location: Sydney, Australia

Post by gb » Thu Jul 17, 2008 1:14 pm

Sorry
I thought MAP was another acronym for MAF. What is the MAP sensore for then.
Regards,

GB from downunder

Blue_Thunder
Top Gear
Posts: 1963
Joined: Wed Nov 22, 2006 10:54 pm
Location: UK - Liverpool

Post by Blue_Thunder » Thu Jul 17, 2008 1:20 pm

Measures inlet pressure just before the throttle body, ie: boost pressure.

Mikey-S
3rd Gear
Posts: 267
Joined: Mon Nov 19, 2007 1:50 pm
Location: Liverpool

Post by Mikey-S » Thu Jul 17, 2008 8:22 pm

Manifold Absolute Pressure.

User avatar
dummi
4th Gear
Posts: 951
Joined: Tue Nov 29, 2005 1:34 pm
Location: birmingham

Post by dummi » Thu Jul 17, 2008 9:09 pm

I hope someone gets some use out of this post

for information if youwant a bosch motorsport one it is 806euro's, i'm not

Post Reply

Return to “RS4 (B5 Typ 8D) 1999-2001”

Who is online

Users browsing this forum: No registered users and 65 guests