RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Hi Martin, are you after pre-facelift solid disc callipers or the facelift ones for vented discs. I have a set of the pre facelift solid disc callipers, £40 the pair plus shipping if you want them. I have just sold my S4 avant to Burnsie84, so no longer needed. have a few other bits i'll stick in th...

I have always used Autobahn at Hexham for both the RS2 they imported for me, and the Imola S4 Avant i have now, will probably get him to service my 968 when its due one. He knows his way round most Audis and works on a few S4's. A decent hourly rate and will happily fit parts you supply.

Have just had to replace the springs on my S4 avant as both where broken at the bottom coil, also broke the ball on a rear ARB link, which led to the dodgy handling with a boot full of paving slaps, will teach me for using it like a van. Standard Audi springs where quoted at about £75 each. So i got...

I've always used Autobahn at Hexham, they sourced my old RS2 from Germany and serviced it for the 4 years i had it, and Still service my S4.
They are more of a BMW specialist used to import E30 M3's but certainly know there way round Audi's and work on a few S4's.

Finally got the rears brakes sorted out, in the end went for B5 facelift calipers and caliper mounts and knocked up some plates to space them out to suit 300mm B6 rear discs, and Goodridge flexis, reckon the whole lots cost me about £120, but the old discs and pads where shot and needed replacing an...

Hi am after a bit of advice regarding rear brakes for the S4 B6, am currently running a B5 S4 and am looking at upgrading the rear brakes to B6 spec, am finding conflicting info as to whether the facelift B5 alloy rear calipers are the same as B6, if so then what is the caliper bracket and pad numbe...

Hi have seen a few people have fitted this upgrade, My S4 is 98 so pre-facelift and i have allready sourced some second hand calipers and caliper mounts of a B5 facelift version. Have been looking at the 034 Motorsport spacer plates to run the B6 discs but it looks a bit of a messy way of doing the ...

Try CRN Products, they do several makes of disc and can groove standard discs if required.

You have PM

Phillip sent you a PM need some advice on these brakes,

Are these the ventilated 269x20 discs and calipers or the earlier 245x10 solid disc version, might be interested if they are the later ventilated version.

Am after a set of rear calipers for a B5 S4 facelift, to suit vented rear discs.
anyone with a set they will sell.

Cheers Paul

I am after a pair of B5 S4 Facelift rear calipers for vented discs, anyone got a set they can part with. PM me if you have cheers,

You could try CRN Products, they do performance brakes mostly but seem to be able to get hold of any discs or pads, I have no affiliation to the company, just used them recently and they were really helpful and cheap, they may not be Audi branded discs but then Audi don't make them themselves anyway...

don't know if this is of any help or just makes things more confusing but when i had my RS2 with standard brakes, i did a lot of searching to find out which discs fitted when i replaced the rear discs. After the usual high quotes from Audi. In the end i went to a Porsche Specialist in Newcastle ' To...