RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Hello, I swapped coils pack between banks, here are the logs but I have not feel any difference. https://vaglogs.com/log/001-032-112-4e13a16b-9b3d-4c4a-8e56-a5f80d30392b I have been thinking, what can I messed up and found two things. I could swap EGT sensors sides and mix oxygen sensors connections...

During first run after service I noticed this issue. My first idea was that injectors stuck and passes too much fuel. I sent all injectors to BOSCH service. They have cleaned and tested all injectors. They are (after service) mounted in different order. Because issue stays the same, injectors need t...

I checked the air box (with endoscope camera) and it looks fine. Made a short log during the road form my job. https://vaglogs.com/log/002-032-011-35460e3e-1065-414b-b42f-ea4125397dcd Here are the error codes form last trip. dtc.PNG I haven't this issue before the service, so I think that there is s...

I put 4x Bosch 0 258 010 073 sensors which should be ok for this car.
Intake checked without the air box, and also, both MAF-s sealing are new.
I will check the air box and make new logs.

The code I had was "P1129 - Bank 2 (Mult): System too Rich" and misfires

Hello Guys. I have a problem with my C5 RS6. Resently, I had transmission converter issue so I needed to get the engine out.I decided to make some additional service. On engine side, besides removing leaks I changed knock sensors (broken connectors) oxygen sensors, sparkplugs, temperature (coolant a...

I used Elring 301.540 gasket, it should be ok. Is there a chance that oil is leaking through screws thread?
I will order another gasket and try to back to the oem sensor. I haven't seen any demage or corosion there.
This time I will put some Elring Dirko on the threds, hope it would help.

Hello Guys

Had any one such issiue?
My oil level sensor is leaking. First I"ve chcange its sealing on a new one but it had not change the situation.
Then I bought a new sensor but it is still leaking. It is leaking even when the oil is cold.
I have no idea what to do next

Hello everyone. I am happy owner of RS6 for a 2 years right now. Few month ago I’ve decide about making service of it. The torque converter was dying and because I needed to take the engine off, few other things have been done. Now I am about to finish but I have small issue. I needed to change fron...