RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Found out to be slightly loose wheel bolts ! The garage hadn't tightened them up properly

Hi all, I had a leaking centre radiator before Christmas so I thought I'd replace it myself I've removed everything and now have access to the front of the engine. While I'm in there is there anything I can replace ? Also is there anyone who knows if there is a good place to source a radiator? I'd r...

I used to get this error a lot with a heavy boot, I ended up removing the intake manifold and the intake manifold flap assemblies, stripping them down to clean the carbon sh!te off them and refitting them. I still the get the error but its now quite infrequent. I have a rook of images I could post ...

So I managed to remove the intake manifold at the weekend, wasn't too difficult and only broke a couple of brittle pipes ! I vacuum tested the lower intake manifold flaps and both sides moved the same. I expected to see one side "flutter" or close as I get an error when driving saying one side is st...

Brilliant thanks !

I was surprised to read drain coolant as a first step! Can this be done without removing all the coolant hoses ?

Hi, I've got an error saying variable intake manifold stuck closed and I want to take a look, does anyone have any instructions on how to remove the intake manifold.

Thanks in advance !

I've had a rumbling noise when turning right at in town speed. its from the rear nearside and I've been told from the garage that it isn't a wheel bearing, it goes away when applying brakes, it sounds similar to a tyre rubbing but it's not that either. Any ideas?

Thanks guys

Hi all, Has anyone had any issues of the jacking points on their cars being really rusty? I've just had my car up on the jack to change the drive belt and it pretty much went straight through the sill. Is there a repair for this and is it an mot failure ? My car has full service history yet going th...

VaudiGR wrote: ↑

Sat Dec 23, 2023 11:02 am

What's the coolant temp sensor part number?

Sent from my SM-S918B using Tapatalk

059919523F is the o e I've ordered from lll parts

Ordered a used steering wheel for £75 and swapped the buttons over, hopefully I'll sell the steering wheel for a similar amount I payed !

Thanks, not too keen on the faux carbon, looks like I'll have to buy a new or used set.

Hi,

The buttons on my steering wheel have started to peel, just wondering if there is any way to repair it instead of paying £300 for a new set of buttons.

I took the sensor out this evening and gave it a good clean, this seemed to work. How did you get to it....it seems to be very hard to get to, did you remove the top radiator / bonnet slam panel ? Long nose pliers and 2 screwdrivers, remove all the pugs that are in the way first and just keep tryin...

I took the sensor out this evening and gave it a good clean, this seemed to work.

Thanks for getting back to me ! I've ordered a new sensor but it's not arrived yet, I'll update if this fixes it