RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

I ve nearly completed the suspension and brake refurb on my RS6 Avant but struggling to find the last few parts which are.

Rear headlight level sensor
Front caliper pins and retaining plates
Rear anti roll bar bushes

Any links or help will be greatly appreciated.

Cheers

I need help in getting the kicker amp to work I have got it working but not sure how to connect the cables or how to set the amp up so it works.

Excuse the crude wiring once I know it works it will be all be run in an fit properly.

The aircon doesn't work it holds the gas and the fuses are ok so while I had the front end off I took a punt an changed the aircon pressure switch but it didn't work.

So before I look at the aircon pump is there anything else it could be ?.

Cheers

Ended up with 5mm spacers. Cheers

Brand new Vossen alloys. Selling as they are not my taste and were on the car when I bought it last week. Vossen HF-3 alloys 5x112 PCD 20 inch x 9J Not sure of the offset but fit a B7 RS4 with no issues I ve posted pictures so you can see how they look on a B7 No welds or buckles. Wheels are in Cumb...

Morning, Running 265/30/20 on coilovers. Although they are ET29 they catch the front brakes which I thought was odd as I assume they would fit straight on must be the curve of the spoke on the 20's so had to use 5mm spacers. Found they were only catching on one of the arch liner screws so I have tak...

What is the best tyre width spacer combo combo to fit 20" rs5 alloys with et29 offset.

Currently have 5mm spacers on the front with 265 tyres but they catch.

Can someone tell me how the cables come out the bracket connected the handbrake.

Do I need to knock the tabs at the side ?

While refurbishment the underside the handbrake cables <beep> themselves taking the bottom arms off and the ratchets extended all the way out and won't adjust back. Can the cables be replaced from removing the center console or do I need to drop the heatshield and exhaust to get at where they connect.

Cheers mate, I have seen his thread so left a post.

I have them in bits just need the correct inners.

Coming along nice that mate.

Currently changing everything on mine but struggling to get the rear inner c.v joints. Did you get new shafts or rebuild your old ones.

Soooooooo I have started on the refurb of the underneath so far so good getting it all in bits. However I have started going through all the parts I ordered and have a couple of issues. 1. I ordered the Lemforder front suspension kit off AutoDoc and it has come in a branded box but all the arms have...

I use LLL Parts website for parts diagrams and numbers, have bought a few things off them in the past. Audi tradition have a few things in stock for the RS6, but parts are thin on the ground for them Just looked at LLL Parts looks good. It's what I was after for diagrams and part numbers so cheers ...

Phoned Awesome GTI for a quote on some powerflex bushes comes in at nearly £1000. I have also emailed AutoDoc to see if they can price it up as there is loads of choices on the website and didnt want to get the wrong ones.

Parts in Motion in the UK do some. I got my handbrake cable from them. https://www.partsinmotion.co.uk/ There is another big site called Trodo that is in Norway. They list alternates quite comprehensively but some are weird. I've not bought from them yet as I generally use Autodoc even though they ...