RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Anyone?

As per title, some cosmetic marks but otherwise good. £20 plus postage or collection from Edinburgh.

Full set of braided lines for a C6 RS6

Brand new, never fitted. £50 plus postage.

Just wondering if anyone on here owns OE08VXB, my old RS6. Found some bits I never got round to fitting.

I ended up just getting them fitted by someone who could recharge the DRC. I couldn't get the strut low enough to clear the wing with the DRC connected. Your other fight with be the top arm pinch bolt. You may end up having to snap/cut the head off and use two nuts o. The threaded end to pull it out...

Apparently it can be done but I har a look and to be honest without removing the front wings I couldn't see how.

Hi all. Looking for some advice. My 2008 RS6 with what I believe is 2g MMI has a weak DAB reception. I can pick up for more stations in other cars.

Are there any likely issues or fixes? I can't find anything specific to the C6?

Mine with H&R springs and 10mm H&R spacers all round. Ideal stance in my opinion. Would maybe have it a few mm higher at the back is it was adjustable. https://uploads.tapatalk-cdn.com/20220925/ff891ea7e17252ce83f8cd34b2eb5909.jpg https://uploads.tapatalk-cdn.com/20220925/09bb889c2834c1df848bcf64b76...

100% will need usb power on 2g mmi system. I fitted a USB port in the glove box How did you do this mate? Bought a cheap usp socket. Removed the glovebox and drilled a hole in the side to but the usb socket through. Then connected it to a power source. Think I tapped into something like the glovebo...

I'll try again but it just snaps the fittings as they aren't pushed in far enough to turn and latch.

100% will need usb power on 2g mmi system. I fitted a USB port in the glove box

That fits on the inner two but there are more layers on the outer one so doesn't seem long enough.

FYI turns out the valve cores at the high and low pressure ports were leaking.

Can someone confirm what the 3 fixings that go at the bottom front edge of the arch liners look like?

Thank you