RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Unfortunately there is as the offset is different unfortunately. So I am not sure if the discs are can be fit onto rs6

Guys,


What is the difference between RS6 C7 and RS7 C7
Rear brake discs?

Yes I have just fitted 15 front and 20mm rear.
I think better to remove the front wheel arch bolts because sometimes I can hear that touching it.

But looks amazing

Hi,

I am looking to buy spacers.
What is the best option?
DRC suspension and 21” stock wheels


Front 12mm or 15mm
Rear 15mm or 20mm

Changing to Dot 5.1 may solve your issue. Topic has been discussed many many times before. If not fluid, easiest fix (although not cheap) is a new clutch and flywheel assembly with a magic pipe from Robnic. Sent from my ONEPLUS A6013 using Tapatalk Pipe changed last week, now there is a vibration o...

Hi,

Vibration issue over 3000rpm. Standing or driving no matter.
Especially it can feel in the clutch pedal.
Clutch not slipping at all.

Before the new Slave cylinder and return pipe fitted it was no vibration at all.

Is it DMF? Or there’s some air in the system? Or what can be else?

I’ve had a same issue. Arms sensor was there. But it didn’t work properly so the fault code came back every 2-3 days. Replaced the sensor and it was not help. So MRC mapped. No issue at all. It was nearly 2 years ago now

Probably the arms is broken. If you don’t have the flaps then Do a stage 2 MRC remap.

Quick question again: just noticed that when Sport mode ON clutch stuck on halfway way back. When using launch controls (just for sound, never used) then pedal stuck on halfway back. Also my mechanic said he can hear some noise from the gearbox when he was under the car. Thing is if I drive the car ...

No I have the oem oil cooler.

About the front diff what you suggest to do?
My mechanic said the noise could be the flywheel.

Covkiller wrote:New clutch, mines doing the same now and has done it before and new clutch.

Yes I will change the clutch. But VRS Northampton and other specialist said no issue with the clutch but because probably the flywheel rattling I will change it.

About 2000rpm when I press full throttle rattling noise coming from somewhere. Anyone had this issue before?
Is it can be a pressure plate or the DA flywheel? Or what else?

Yes i have a new pipe and slave cylinder. But not fitted because when checked both of them it was in very good condition. I’ve ordered new clutch from Rockauto but because the clutch not slipping i was thinking that it can be different things.

So you’ve had exactly same issue? Or still have it?

Hi, When I driving the car hard sometimes, the clutch stuck on the middle way back. And when the car stop for an hour then press the clutch also stuck. And I can hear rattling noise between 1400-2200rpm. Strange is that if I’m driving like a grandpa than everything is fine. Clutch is stuck 1 times/m...

Im just waiting answer about repair price but my friend said not cheap. I will text you later