Search found 120 matches

by douglas96
Tue Nov 22, 2022 6:14 pm
Forum: RS6 / RS6 Plus (C6 Typ 4F) 2008-2010
Topic: Oil pump seal help!
Replies: 3
Views: 1231

Re: Oil pump seal help!

Listed underneath the cover, and not numbered on the drawing is P/N;

D 176 501 A1 - Silicon sealant - 50ml

Looking at images on the internet of that part number it seems to be Loctite 5970.
by douglas96
Thu Nov 10, 2022 11:45 pm
Forum: RS6 / RS6 Plus (C6 Typ 4F) 2008-2010
Topic: Diy oil pump removal?
Replies: 32
Views: 10852

Re: Diy oil pump removal?

I was watching a video on the internet about the dry sump oil pumps on the Audi V10 engines by REPerformance ( link to video ) and I noticed at the 15 minute mark it was mentioned that the bolts securing the coolant thermostat housing to the coolant pump housing, and the coolant pump housing to the ...
by douglas96
Wed May 13, 2020 6:27 pm
Forum: RS6 / RS6 Plus (C6 Typ 4F) 2008-2010
Topic: How to correctly relieve pressure from HPFP ?
Replies: 8
Views: 4582

Re: How to correctly relieve pressure from HPFP ?

Does someone has experience with the pressure relief from the high pressure fuel pumps or can at least confirm that pulling the fuse 1 on the fusebox does work or not work ? Many thanks. Hi, I have done this a couple of times on my car, quite some time ago now though (I replaced the solenoid valves...
by douglas96
Tue Jul 30, 2019 10:54 pm
Forum: RS6 / RS6 Plus (C6 Typ 4F) 2008-2010
Topic: Parts left over - quiz
Replies: 5
Views: 1355

Re: Parts left over - quiz

N__909_675_02_zoom.PNG
Closer look at the placement.
by douglas96
Tue Jul 30, 2019 10:47 pm
Forum: RS6 / RS6 Plus (C6 Typ 4F) 2008-2010
Topic: Parts left over - quiz
Replies: 5
Views: 1355

Re: Parts left over - quiz

Spoke too soon - I think I've found it;
N__909_675_02 - Copy.PNG
N 909 675 02

https://www.ecstuning.com/b-genuine-vol ... n90967502/

That looks like it hopefully.
by douglas96
Tue Jul 30, 2019 10:42 pm
Forum: RS6 / RS6 Plus (C6 Typ 4F) 2008-2010
Topic: Parts left over - quiz
Replies: 5
Views: 1355

Re: Parts left over - quiz

Jim, The closest I have found at the moment is; N__908_170_03 - Copy.PNG An image is available here (https://www.ecstuning.com/b-genuine-volkswagen-audi-parts/torx-bolt-priced-each/n90817003/), but it doesn't look like the same screw as it looks like it has more of a flanged head than the one in you...
by douglas96
Tue Jul 16, 2019 10:24 pm
Forum: RS6 / RS6 Plus (C6 Typ 4F) 2008-2010
Topic: HELP - Front Caliper Pistons and seals
Replies: 19
Views: 3311

Re: HELP - Front Caliper Pistons and seals

Jim Haseltine wrote:
Tue Jul 16, 2019 9:39 pm
Assuming that I've measured them correctly as the pistons in my calipers are almost at base 'cos the pads are nearly new, (I've measured 3) I reckon that they're 32mm.

The pistons are in 2 different diameters;

2 - 34mm,
4 - 36mm.
by douglas96
Thu Jul 11, 2019 10:52 am
Forum: RS6 / RS6 Plus (C6 Typ 4F) 2008-2010
Topic: Front diff / Transfer case oil change.
Replies: 10
Views: 4328

Re: Front diff / Transfer case oil change.

just make sure you remove the fill/inspection plug before draining it to make sure you can refill it. The most important part of a great post there Douglas!!! Yes! I've heard of a few people learning that the hard way! Fortunately I didn't have any bother taking them off, but just in case. There is...
by douglas96
Wed Jul 10, 2019 3:47 pm
Forum: RS6 / RS6 Plus (C6 Typ 4F) 2008-2010
Topic: HELP - Front Caliper Pistons and seals
Replies: 19
Views: 3311

Re: HELP - Front Caliper Pistons and seals

Problem is that a lot of the impact is absorbed by movement in the arm bushes. What you need to do is damp it by having an assistant hold a heavy hammer tight against the opposite side of the arm - something I learned many, many years ago when I had to remove wedge cotter pins on a regular basis. C...
by douglas96
Wed Jul 10, 2019 3:02 pm
Forum: RS6 / RS6 Plus (C6 Typ 4F) 2008-2010
Topic: Front diff / Transfer case oil change.
Replies: 10
Views: 4328

Re: Front diff / Transfer case oil change.

I meant to update this sooner, but anyway here it is. The rear diff is very easy to drain and replace - just make sure you remove the fill/inspection plug before draining it to make sure you can refill it. About 850ml or so came out and about 1.2 litres to fill it back up to level. I used part numbe...
by douglas96
Wed Jul 10, 2019 12:42 pm
Forum: RS6 / RS6 Plus (C6 Typ 4F) 2008-2010
Topic: HELP - Front Caliper Pistons and seals
Replies: 19
Views: 3311

Re: HELP - Front Caliper Pistons and seals

I cant source them anywhere so far. Brembo dont even list the caliper on line. I have sent them a tech request for info. There is someone on ebay in Germany selling a kit but not a Brembo kit and its 150 quid per side. I have had an absolute mare today changing the discs, not due to the discs thats...
by douglas96
Sun Apr 07, 2019 10:14 pm
Forum: RS6 / RS6 Plus (C6 Typ 4F) 2008-2010
Topic: Engine oil thermostat sealing plug
Replies: 5
Views: 1294

Re: Engine oil thermostat sealing plug

The part - 036 103 193 - is the same part that was fitted from factory, at least, to both Jim's car and my car. The new one I got is shown below; 036_103_193 - Copy.JPG The seal ring I bought - N 013 815 7 - is not flat - instead it is cylindrical, like a doughnut. It is shown below; N__013_815_7 - ...
by douglas96
Thu Mar 28, 2019 10:30 pm
Forum: RS6 / RS6 Plus (C6 Typ 4F) 2008-2010
Topic: AGM battery...
Replies: 3
Views: 1390

Re: AGM battery...

Anyone using a AGM battery in their C6 RS6? My battery is on the way out (Varta I6) and I have a new AGM battery... Any issues fitting these? According to the VARTA website battery finder here they list an AGM battery as a replacement for our cars. I replaced mines last year with a Bosch S5 battery...
by douglas96
Thu Mar 28, 2019 9:57 pm
Forum: RS6 / RS6 Plus (C6 Typ 4F) 2008-2010
Topic: Front diff / Transfer case oil change.
Replies: 10
Views: 4328

Re: Front diff / Transfer case oil change.

Yeah, located the fill holes for the front diff. Quite tricky to get to. Hi, Did you manage to get both the transfer box and final drive drained and filled? Did you have to remove the tunnel crossmember and the gearbox support to be able to access the fill plug at the transfer box? I'm asking as I'...
by douglas96
Tue Mar 26, 2019 5:06 pm
Forum: RS6 / RS6 Plus (C6 Typ 4F) 2008-2010
Topic: Engine oil thermostat sealing plug
Replies: 5
Views: 1294

Re: Engine oil thermostat sealing plug

When I first changed the oil I went into the local dealers and asked the parts manager (whose knowledge I've trusted for years) for a few sets of all the seals that I'd need. What he gave me were a load of alloy washers in 2 different sizes - one size for the round plugs and one size for the hex-pl...

Go to advanced search