RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

Hi all has been working fine no issues with this set up, done nearly 2000miles with no issues.( well only cracking my bumper again and the fuel pump springing a leak!) i did log the gearbox temp can't remember what it was now but all was within specifacation tc lock up all working fine. cost roughly...

Hey guys So now christmas and all that is out of the way, i got back on the over boost fault on the loon. going through active tests with vcds i was convinced i had found a fault with the solenoid for the diverter valves after it started clicking after i tapped it with a screw driver, so i replaced ...

i had this, and a easy way if your not bothered about auto dimming, pull your mirror glass out, remover the black plastic trim around the edge, carefully slide a blade or small driver between the two pieces of glass until they seperate, clean the glue from around the edge (i used a blade) pull the c...

I don't have a pattern to work from, anyone have dimensions or a drawing? I was leaning more towards the fibreglass route i don't think the moulding would be that difficult, once i have a pattern the mold can be made simply with a clay form, that way the air ducts ect can be allowed for and simply c...

Well on my mission to revolutionise rs6 ownership I've been looking into a alternative under tray, I don't know if this cropped up before I never looked! (Just being honest) I've never had a under tray and don't intend buying a genuine one so I'm going to make one from fiberglass,carbon fibre or sta...

N249 is that for the dvs?

working my way through the faults on the loon but this one is frustrating me, I've fitted a new n75 boost valve, replaced the vac hoses and tested the dvs and also replaced the brake light switch (for other reasons) but I'm still getting this over boost are there other common causes of this code?, i...

Hi i don't get the ok message all i get is the press brake before selecting gear message, but no errors.

what else can i change! lol

mavada wrote:Dont know if this works, you could try this:

Select 17-Instruments; Adaptation; Channel 61.
Subtract 512 from whatever value you find there. (or change 3843 to 3331 if thats shown...)

Let us know if this works

think you posted that while i was writing mine! lol

ok i couldn't find a definite answer to this so i had a go anyway! the end result is no mention of the tyre pressures on the display at all and no options. this is how i did it don't know if its the correct way or is there is another way but this worked for me :beerchug: 17 instruments 10 adaption s...

hi guys I've been searching the forum for a hour and can't find a thread explaining how to turn the tyre pressure monitoring off with vagcom,could somebody kindy explain this to me or point me to the thread if one exists (I'm sure it does somewhere)

hey guys I'm thinking about doing this, where did you get these brackets you speak of?

Yes looks like it! Doh!!

Dam

:beerchug: Ordered 2 eagle f1s from here today after reading this, far cheaper than any prices I had already, £152 each! I'm in the trade and the closest price from my wholesale suppliers was £190 I was jubious thinking they were going to stick the vat on at the end of the check out but nope! Chuffe...