RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

I was chatting with a fellow S4 B6 owner and he was cringing at the prices I paid for the parts from Audi, he said I would have got them WAY cheaper from EuroCarParts. Worth a try, but don't know if they will be Genuine Audi or not, but to be honest I'm sure they'll be just fine even if they're not.

Well, at long last my timing rebuild has been completed. Now up and running great and just waiting for Jake (JHM) to send me their Tune (93) which will be on I guess within the week. So while I have a few spare minutes thought you might like to see the car my previous Rebuild/Fault Code Thread was a...

Thanks for your comments.

JHMotorsport Tune (93) was ordered yesterday

So will have an update by the end of the week..........

.

Another sixty miles with no further issues or fault codes.

:jump: Back on the road again...... Isn't there a song called that. Well...... we finished the job this morning just before mid day, cleared all the previous codes that had caused us to half remove the engine again, took if for a drive (About ten miles) ran perfectly, really strong on torque and pow...

Whey Hey......... She's up and running and sounds so sweet Just putting a few miles on her then back on the lift, pull of the underside shields and check for any leaks. Pics to follow very shortly Bits Done : 1. Total Timing Gear Overhaul (Using every item listed in JHM's "Full Plus Kit"). http://i...

Thanks Ben, Hope it proves helpful to you and others. The final days of the rebuild...... I have the weekend off work and my main man is working flat out to finish it so hopefully I'll be back on the road on Monday.......... At last. Have to say a huge thanks to Kal at Moorland Motors (Gosport - Eng...

Parts Prices from Audi are :

Dual Mass Flywheel £950.00
Pressure Plate was around £130
Clutch Plate was around £130

Pressure plate and clutch plate are both exchange... and above is what you'll end up paying having handed over the old parts.

Not a lot to say about the pictures below, this is with the "Full Plus Kit" fitted (All timing components replaced). Just getting ready to put it back into the car. http://i18.photobucket.com/albums/b118/jimgreen72/IMG_20581_zps0a847eb7.jpg http://i18.photobucket.com/albums/b118/jimgreen72/IMG_20571...

As you mention that it won't go into gear, it does sound like either your clutch "Slave Cylinder" or "Master Cylinder" has started to fail. Not sure what would cause the juddering though, this could suggest you have an issue with the pressure plate. Go for the easy things first, Slave, Master, Press...

Yes, they can. Obviously need to lift the car up on stands, and then remove the exhaust, then the down pipes. Once you've done this which should take about an hour, removing the pre cats is about thirty minutes work on each. Well worth it from what I've read, still got to get my engine back in to ve...

I'd recommend when you are looking at suspension you go straight for these: http://www.larkspeed.com/index.pl?a=i&p=W332502&part=Audi-RS4-B6-Quattro-4-2-V8-Saloon-Avant-Cabrio-H-R-Anti-Roll-Bar-Kit They're the H&R 32mm front, 24mm rear bars designed for the B7 RS4 and are perfect on the B6 S4 (both...

Well......... As the days tick past I keep doing all those little bits that while the engine's out you should take advantage of. So, if anyone want's two pre cats from a 2005 B6 S4........... here they are, you just need to come and collect them : http://i18.photobucket.com/albums/b118/jimgreen72/IM...

Well, after a few delays and my mechanic being a bit anal about cleaning parts (Many Thanks - Real Professional) as they were taken out and in some cases cleaning parts before they were taken off to prevent and debris falling into the engine, things are finally on the move. A few additional parts th...

26 inches front and rear from ground lip of arch.