RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

All parts gone

Due to Divorce, I need to clear out everything. I have the following parts left over from an RS6 C5 2003. Rear suspension subframe with arms, hubs. Front subframe Front anti-roll bar Rear dog-guard Intercoolers with some pipes attached Exhaust system (no downpipes) Power steering cooler and some oth...

MG

MG

Engine/gearbox out and back in is between 32-37 hours book time from Audi. That's without any additional work while it's out. As this is normally done because the gearbox needs work, you have to ask the question,what condition is your gearbox in? The refurbishment of the gearbox isn't all that expen...

Sorry to point this out... but... (this is my understanding of it... that's all ;) ) The wheels are centered on the wheel bolt head and recess design in the wheels rather than on the spigot itself. The spigot is simply there to allow you to line up the wheel bolts easily. Once you have torqued the ...

Deep breath... Ok here goes nothing (well, £318.22 actually!)... I've gone for the Turbo Rebuild Ltd cartridges and will swap everything over myself. I pulled the gearbox off last night so one of the turbos is already off. i have one seized stud that I really don't want to have to drill out but I th...

Sorry to point this out... but... (this is my understanding of it... that's all ;) ) The wheels are centered on the wheel bolt head and recess design in the wheels rather than on the spigot itself. The spigot is simply there to allow you to line up the wheel bolts easily. Once you have torqued the w...

Shoppinit wrote: ↑

Wed Jul 19, 2017 10:54 am

What are you going to do with the shell? If you can't sell it, that is.

It'll get weighed in.

I've got pretty much everything I want off it.

The yard belongs to a friend so they are free to sell off any of the remaining parts and keep whatever they can get for it.

MG

And so it comes to this... http://i690.photobucket.com/albums/vv264/performanceghia/RS6%20revisited/Black%20RS6%20scrapped%2001_zpsnsuxsmuw.jpg Incidentally, now that the front wings and sill trims are off, there is damage evident on the left front wing mounting front corner and the left front corne...

I have an RS6 gearbox here for spares if you need/want anything.

MG
07989 333437

Anyone got a video of an RS6 running 3" downpipes, system but with silencers?

I need this van to be sensible to be driven everyday but 3" from throughout from the turbos sounds good.

On my project, I don't have to have a bend straight after the turbo flange, there's nothing in the way there...

MG

That company you linked above actually sells genuine Borg warner rebuild kits. I've not used them yet as I haven't had the chance to build a k03/04 yet. Only done the TD04/05 which are made by MHI and used mainly on Japanese cars. Oh and I've seen the previous post on the gearbox rebuild. A turbo r...

bam_bam wrote: ↑

Mon Jul 10, 2017 4:01 pm

I could do that, I'm awesome at pulling...

... you'll be telling me next that that's with the towbar on your plus

MG

I used to the oem CHRA as it was fine to use. Plus you have to be careful as there's a lot of cheap replicas around. So you're better off sticking with oem and updating bearings etc. The hardest part is if you wanna put on bigger wheels as it'll mean machine the turbine/compressor housing. Ok thank...