RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

I have the old engine taken from my car, it has no compression on cylinder 6, suspected bent valve as the spark plug disintegrated. The engine is complete with oil pump and fuel pumps etc. £2000ono can be delivered in and around Kent/Essex. Complete Prop Shaft had as a spare but have sold my car. of...

For Sale: Removed from my own C6 RS6 standard 6 pot Brembo callipers, 410mm AP Racing Discs/Bells with Ferodo DS2500 pads only 25% used. the callipers were refurbished about four years ago but as you can see they're in excellent condition. the discs are well used but still have life in them, can be ...

I have both intercoolers from my 2010 car with 35k miles, both in excellent condition, removed as I've upgraded.
Open to offers...

looks very nice mate

thanks for your reply! yes its definitely from a C6 RS6, I've checked the ratio and its the same! I was just confused as to the difference in some of the numbers on the casing, but I guess the casing is used on other models just with different internals. And they both have HNL stamped on them so I'm...

Are all C6 Rear diffs the same, so do they have the same ratios, I’ve just got hold of a second hand one and although most of the numbers on it are the same it does have some different? https://uploads.tapatalk-cdn.com/20200731/88bf764d5b42671e1fdad0315d8b43ab.jpg https://uploads.tapatalk-cdn.com/20...

Prop to diff 55Nm Driveshafts to diff 70Nm All bolts are 'always renew' - the prop bolts are almost at their maximum setting and are easy to strip out the splines, so yes, replace them. Personally I reckon the drive shaft bolts could be reused - once, but it's not really worth it. thanks mate much ...

so I'm changing my rear Diff, I was just wondering if anyone can tell me the torque settings for prop to Diff and driveshafts to diff?
and are the bolts reusable?

thanks very much.

IanH755 wrote: ↑

Sun Jul 26, 2020 9:32 am

pete2144 wrote: ↑

Sat Jul 25, 2020 1:40 pm

Is the fill plug on the side, and do I fill until it comes out?

cheers.

Yes the fill is on the Right side and Yes fill to spill.

Thanks Ian...

Hi Pete - I used Motul 300 in my 900+ car, alongside a few other Stage 2 owners. It takes about 1.25L to fill but most importantly - make sure you remove the top mounted fill plug BEFORE you remove the lower mounted drain plug and drain the old oil out, just to make sure you can actually refill it ...

Afternoon,

so my rear diff has given up, I've managed to source a good used one, was just wondering on oil type and how much does it take?
what is the best for a modified car?
mine is running 907ps 1200nm, so I assume I should use something high performance?

cheers Pete.

where abouts are you? cheers.

sounds normal to me

chunky79 wrote: ↑

Wed Mar 18, 2020 2:13 pm

Weiß-sechs wrote: ↑

Wed Mar 18, 2020 2:12 pm

pete2144 wrote: ↑

Tue Mar 17, 2020 3:25 pm

its not a Plus mate, all Plus models are 2010

Did the C6 come with the number plaque as C5 did?

Pretty sure it did, in front of the gear shifter

yes it did mate mine is number 100

chunky79 wrote: ↑

Sun Feb 23, 2020 3:03 pm

pete2144 wrote: ↑

Mon Jan 27, 2020 12:33 pm

Yes Suzuka and yes Red Leather

Is it Grizz's old beast?

yes mate