RS6 is finished )

4.2 V8 40v biturbo - 450 bhp
4.2 V8 40v biturbo - 480 bhp (plus)
Mɐʇʇ
Cruising
Posts: 2720
Joined: Tue Oct 07, 2014 8:30 pm

Re: RS6 is finished )

Post by Mɐʇʇ » Wed Mar 30, 2022 9:29 am

On axle stands in my garage working solo it's 2 weekends work to replace the engine based on what I see in Astro's pic. The condition of your turbos and whether they unbolt OK or the studs need drilling and helicoiling would be key to whether it's an easier or harder job. But if my engine toasted itself tomorrow - could I be arsed? I am not sure. History says I probably would, but I'm older now.

I find it's 1.5 days effort out and 1.5 effort in. In addition, for a transplant, you'd plan on turbo & gearbox swap, plus cambelt. 1 day, subject to turbo note above. That's where the 4 comes from.

With a lift = quicker
With a mate = quicker
Not done it before = slower
Last edited by Mɐʇʇ on Wed Mar 30, 2022 9:42 am, edited 1 time in total.
"not a professional engineer, mechanic and mechanist"

Astrosquirrel
3rd Gear
Posts: 274
Joined: Thu Nov 07, 2013 7:03 pm

Re: RS6 is finished )

Post by Astrosquirrel » Wed Mar 30, 2022 9:33 am

Barry, is your engine still assembled or did unit 20 pull it apart?

NC5RS6owner
1st Gear
Posts: 89
Joined: Thu Jul 08, 2021 5:35 pm

Re: RS6 is finished )

Post by NC5RS6owner » Wed Mar 30, 2022 10:41 am

Still assembled I believe

NC5RS6owner
1st Gear
Posts: 89
Joined: Thu Jul 08, 2021 5:35 pm

Re: RS6 is finished )

Post by NC5RS6owner » Wed Mar 30, 2022 10:54 am

Just got off the phone 📞 with martin at unit 20 says is the engine with turbos ? As said he would replace them as the inter coolers were filling with quite a bit of oil, if not to refurb mine would be around £450 each plus labour to refit new engine would be 20 hours labour which is £1400 plus vat so all in about £1640 plus turbo rebuild if not with engine

Astrosquirrel
3rd Gear
Posts: 274
Joined: Thu Nov 07, 2013 7:03 pm

Re: RS6 is finished )

Post by Astrosquirrel » Wed Mar 30, 2022 11:37 am

Alright. How's this?

Pull your engine off the car, remove the turbos, cats, exhaust manifolds. If you have a mate with a van or can rent one, make your way over here with that engine.

You take my engine with you with no turbos cats or exhaust manifolds, for 1700GBP. Leave me yours.

This is how it roughly them breaks down :

1500 for turbos and retrofitting
~ 500 for your trip here
1700 for my engine


Gives you a small margin for "unplanned" other things.

My only condition: don't disassemble your engine.



Sent from my SM-N975F using Tapatalk


steve2003rs6
Cruising
Posts: 2935
Joined: Mon Aug 19, 2019 7:43 pm

Re: RS6 is finished )

Post by steve2003rs6 » Wed Mar 30, 2022 11:58 am

That’s a really generous offer from you Astro.
Well done mate.
It gives Barry another option to consider if he decides to keep the car.

NC5RS6owner
1st Gear
Posts: 89
Joined: Thu Jul 08, 2021 5:35 pm

Re: RS6 is finished )

Post by NC5RS6owner » Wed Mar 30, 2022 12:42 pm

steve2003rs6 wrote:
Wed Mar 30, 2022 11:58 am
That’s a really generous offer from you Astro.
Well done mate.
It gives Barry another option to consider if he decides to keep the car.
:D Yeah thanks for that lol 😂 you really have threw a spanner in the works there

Foxmeister
4th Gear
Posts: 516
Joined: Wed Feb 24, 2010 1:37 pm

Re: RS6 is finished )

Post by Foxmeister » Wed Mar 30, 2022 4:22 pm

Astrosquirrel wrote:
Wed Mar 30, 2022 8:51 am

Thank you and I appreciate the great place your suggestion is coming from. I've not yet been disappointed in this community :notworthy:

For clarity though: I am not really "looking" to sell the engine. NC5RS6owner cited desperate times and I thought this could be a reasonable way to - help - and bring his car back. Seems to me that's not a possibility, so I'd rather hold on to it.

Really hoping my intent is clear and this comes off ok, as text can be misinterpreted.
No problem, i had thought you might want to keep the engine and were only offering to help a forum member out, i understand and no problems on my part :beerchug:

Mark-RS
4th Gear
Posts: 798
Joined: Thu Sep 15, 2016 1:13 pm

Re: RS6 is finished )

Post by Mark-RS » Wed Mar 30, 2022 7:22 pm

Astrosquirrel wrote:
Wed Mar 30, 2022 11:37 am
Alright. How's this?

Pull your engine off the car, remove the turbos, cats, exhaust manifolds. If you have a mate with a van or can rent one, make your way over here with that engine.

You take my engine with you with no turbos cats or exhaust manifolds, for 1700GBP. Leave me yours.

This is how it roughly them breaks down :

1500 for turbos and retrofitting
~ 500 for your trip here
1700 for my engine


Gives you a small margin for "unplanned" other things.

My only condition: don't disassemble your engine.



Sent from my SM-N975F using Tapatalk
Don't have a gearbox do you ? :D :D :D

Astrosquirrel
3rd Gear
Posts: 274
Joined: Thu Nov 07, 2013 7:03 pm

Re: RS6 is finished )

Post by Astrosquirrel » Wed Mar 30, 2022 7:24 pm

Mark-RS wrote:
Wed Mar 30, 2022 7:22 pm

Don't have a gearbox do you ? :D :D :D
I do. But I couldn't tell you if it has 10, 10k or 100k left in it before it needs redoing. All I can tell you is the car was driving fine before I tore it apart.

Post Reply

Return to “RS6 / RS6 plus (C5 Typ 4B) 2002-2004”

Who is online

Users browsing this forum: bilko1, Google [Bot] and 111 guests