I have a query,
On our MY15 FL (w/ black pack) the black on the oval exhaust tips is fading away. It’s starting to look tacky and a bit rubbish.
Anyone have a clue if just the oval tip can be replaced or does it have to be the whole diffuser part?
Ta
Rear Diffuser/Exhaust Tips
Re: Rear Diffuser/Exhaust Tips
Try paint it and save money
Re: Rear Diffuser/Exhaust Tips
Just the tips mate,I just repainted mine,I lowered the exhaust and unscrew the 3 screws holding each tip in and that’s it,some people take the rear bumper off but I found my way easier
Re: Rear Diffuser/Exhaust Tips
This sounds pretty straight forward. Do you mind saying how you lowered it as I am locking to have these repainted aswell. Thanks
Re: Rear Diffuser/Exhaust Tips
I undone the exhaust clamps,undone the exhaust rubbers,undone the rear support bars and pulled it out the rear of the car mate
Re: Rear Diffuser/Exhaust Tips
I just did mine too - removed the bumper to get them off which was surprisingly easy.
This video helped - https://youtu.be/_Qw0OxeaPfU. Think there’s an extra screw for the avant vs. the video of the saloon but it’s pretty obvious. You’ll need a box or something to sit the bumper on as the parking sensor cable doesn’t easily unclip and is too short for the bumper to sit on the floor. Note the screws are star shaped - the toolkit has the right size if you don’t have the right tool already.
I got the tips dipped and double powder coated at a wheel refurb place for £20! All pretty cheap and easy to do.
There’s a few threads on here about getting them replaced on warranty - I did that on my last rs6, had to contribute half the cost, and they corroded again within 6 months so a complete waste of money and effort!
Hope that helps.
This video helped - https://youtu.be/_Qw0OxeaPfU. Think there’s an extra screw for the avant vs. the video of the saloon but it’s pretty obvious. You’ll need a box or something to sit the bumper on as the parking sensor cable doesn’t easily unclip and is too short for the bumper to sit on the floor. Note the screws are star shaped - the toolkit has the right size if you don’t have the right tool already.
I got the tips dipped and double powder coated at a wheel refurb place for £20! All pretty cheap and easy to do.
There’s a few threads on here about getting them replaced on warranty - I did that on my last rs6, had to contribute half the cost, and they corroded again within 6 months so a complete waste of money and effort!
Hope that helps.
Who is online
Users browsing this forum: Google Adsense [Bot] and 90 guests