Front Splitter fitted

5.0 V10 50v biturbo - 571 bhp
Post Reply
User avatar
pete2144
3rd Gear
Posts: 279
Joined: Tue Oct 09, 2007 5:32 pm
Location: Kent

Front Splitter fitted

Post by pete2144 » Sat Mar 11, 2017 5:50 pm

Finally got around to fitting the front splitter i bought from eBay.de, looks so much better than oem, and only twenty minutes or so to fit ImageImageImageImage
C6 RS6 Plus MRC 955ps 1220nms
Top
bal
1st Gear
Posts: 94
Joined: Fri Mar 11, 2016 5:26 pm

Re: Front Splitter fitted

Post by bal » Sat Mar 11, 2017 8:57 pm

Looks really good!

Do you have a link to ad you picked it up from?
Top
User avatar
pete2144
3rd Gear
Posts: 279
Joined: Tue Oct 09, 2007 5:32 pm
Location: Kent

Re: Front Splitter fitted

Post by pete2144 » Sat Mar 11, 2017 9:06 pm

http://www.ebay.de/itm/Audi-RS6-4F-C6-F ... Sw8-tWWdOI

it was on ebay UK at some point but can't find it now....
C6 RS6 Plus MRC 955ps 1220nms
Top
User avatar
Golfather
Cruising
Posts: 3033
Joined: Thu May 13, 2004 10:27 pm
Location: Berks
Contact:
Contact Golfather

Re: Front Splitter fitted

Post by Golfather » Sun Mar 12, 2017 3:10 pm

I have one of these brand new in the UK if anyone is interested in getting one.
Top
Andyevo
2nd Gear
Posts: 193
Joined: Thu Mar 04, 2010 9:23 am
Location: Sunny Devon, UK

Re: Front Splitter fitted

Post by Andyevo » Tue Mar 14, 2017 1:04 pm

Looks great Pete
Top
User avatar
pete2144
3rd Gear
Posts: 279
Joined: Tue Oct 09, 2007 5:32 pm
Location: Kent

Re: Front Splitter fitted

Post by pete2144 » Tue Mar 14, 2017 10:23 pm

:thumbs:
C6 RS6 Plus MRC 955ps 1220nms
Top
User avatar
Farravi
3rd Gear
Posts: 305
Joined: Sun May 31, 2015 5:48 pm

Re: Front Splitter fitted

Post by Farravi » Wed Mar 15, 2017 7:21 pm

Pete, noticed you haven't got your plates on, do you get the coppers bothering with this?

P.S Had mine in pearl white (wrapped) but took it off recently :)
Top
User avatar
pete2144
3rd Gear
Posts: 279
Joined: Tue Oct 09, 2007 5:32 pm
Location: Kent

Re: Front Splitter fitted

Post by pete2144 » Wed Mar 15, 2017 7:32 pm

not as yet but don't really use it that much its my weekend car, its Suzuka Grey looks white most of the time though....
C6 RS6 Plus MRC 955ps 1220nms
Top
User avatar
chunky79
Cruising
Posts: 11517
Joined: Sun Feb 25, 2007 11:51 am
Location: West Mids

Re: Front Splitter fitted

Post by chunky79 » Wed Mar 15, 2017 8:58 pm

Is that Grizz's old motor?
previous- Pug 205 gti, 306 gti, 309 gti Goodwood.
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.

Now - Empty garage

If you don't know where you're going, any road will take you there!
Top
User avatar
pete2144
3rd Gear
Posts: 279
Joined: Tue Oct 09, 2007 5:32 pm
Location: Kent

Re: Front Splitter fitted

Post by pete2144 » Wed Mar 15, 2017 9:00 pm

Yes mate
C6 RS6 Plus MRC 955ps 1220nms
Top
User avatar
chunky79
Cruising
Posts: 11517
Joined: Sun Feb 25, 2007 11:51 am
Location: West Mids

Re: Front Splitter fitted

Post by chunky79 » Wed Mar 15, 2017 9:03 pm

Ooooo nice!!! Love that car, congrats.
previous- Pug 205 gti, 306 gti, 309 gti Goodwood.
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.

Now - Empty garage

If you don't know where you're going, any road will take you there!
Top
User avatar
pete2144
3rd Gear
Posts: 279
Joined: Tue Oct 09, 2007 5:32 pm
Location: Kent

Re: Front Splitter fitted

Post by pete2144 » Wed Mar 15, 2017 10:17 pm

:thumbs:
C6 RS6 Plus MRC 955ps 1220nms
Top
User avatar
Farravi
3rd Gear
Posts: 305
Joined: Sun May 31, 2015 5:48 pm

Re: Front Splitter fitted

Post by Farravi » Fri Mar 17, 2017 9:27 am

Golfather wrote:I have one of these brand new in the UK if anyone is interested in getting one.
Mate I've pm'd you.

Top
perthwaRS6
3rd Gear
Posts: 404
Joined: Fri Jan 09, 2009 6:10 pm

Re: Front Splitter fitted

Post by perthwaRS6 » Sun Mar 26, 2017 5:44 pm

I am interested in this front splitter.

May I ask how you go about replacing the oem front splitter and replacing with this one? Are there nuts/bolts to be undone? How do you get to them?

Any advice appreciated.
cheers,
john
2009 RS6 sedan,5.0L FSI V10,phantom black,730bhp-98 octane,750bhp-104 octane,APR stage 1 map,MTM/Performance Friction 405mm front rotors,JCFabweld sports exhaust,MRC filters,Michelin PSS.
2011 Lamborghini Gallardo LP560-4 coupe,5.2L V10 TT UGR 800-1250whp, e-gear 6 speed,390 mm Alcon Racing front rotors, grey.
1969 E type Jaguar convertible with 5.2L 6 cylinder Rob Beere Racing engine,356 bhp-415 ft-lbs,midnight blue-old school but beautiful
Top
User avatar
pete2144
3rd Gear
Posts: 279
Joined: Tue Oct 09, 2007 5:32 pm
Location: Kent

Re: Front Splitter fitted

Post by pete2144 » Sun Mar 26, 2017 9:42 pm

Jack the car up, undo four screws I think??? then there are maybe ten or so press fittings to pull out, then just slide the old splitter out...
Line up new Splitter then drill ten very small holes and screw into place...
Job done :thumbs:
C6 RS6 Plus MRC 955ps 1220nms
Top
Post Reply

Return to “RS6 / RS6 Plus (C6 Typ 4F) 2008-2010”

Who is online

Users browsing this forum: No registered users and 40 guests