RS4 take 2

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
User avatar
pule333
5th Gear
Posts: 1408
Joined: Sat Jan 19, 2013 5:56 pm

Re: RS4 take 2

Post by pule333 » Thu Jan 05, 2017 11:46 am

Jules wrote:
pule333 wrote:Video or it never happened ;)

HA HA yep ill get that sorted mate :thumbs:
Ps. I have some sound recording equipment if you wanna do it properly ;)
ilya, photographer http://www.ikrylov.com

RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness
Top
User avatar
Jules
Top Gear
Posts: 2416
Joined: Tue Jun 12, 2007 10:13 pm
Location: Cheshire/Derbyshire

Re: RS4 take 2

Post by Jules » Thu Jan 05, 2017 11:48 am

pule333 wrote:
Jules wrote:
pule333 wrote:Video or it never happened ;)

HA HA yep ill get that sorted mate :thumbs:
Ps. I have some sound recording equipment if you wanna do it properly ;)
Not sure where you are located but id be up for meeting mate :thumbs:
Drive low,park lower
Top
User avatar
pule333
5th Gear
Posts: 1408
Joined: Sat Jan 19, 2013 5:56 pm

RS4 take 2

Post by pule333 » Thu Jan 05, 2017 11:49 am

Jules wrote:
pule333 wrote:
Jules wrote:
HA HA yep ill get that sorted mate :thumbs:
Ps. I have some sound recording equipment if you wanna do it properly ;)
Not sure where you are located but id be up for meeting mate :thumbs:
NW10 near Wembley. Taking car to JcweldFab on Monday for custom thingy bobs as well.;)
ilya, photographer http://www.ikrylov.com

RS4 B7 aka Vinnie
AMD stage2|De-coked|GruppeM|CAF|Eibach arbs|BilsteinB14|Goodridge hoses|DS3000|phaeton brake ducts|Led tail lights|Trups DTRL|LED interior|JcWeldFab|034 motorsport endlinks, mounts and bushings|ECS Differential Mount|JHM short shift|JHM intake spacers|8/10mm H&R|R2D2 10" sub and AMP|Corbeau seats|4point harness
Top
User avatar
Starry
4th Gear
Posts: 777
Joined: Fri Jul 15, 2016 9:42 pm

Re: RS4 take 2

Post by Starry » Thu Jan 05, 2017 1:31 pm

marc1 wrote:^ Thant is the drive height. :biggrin3: when it's lowered it's the same height as the Liberty Works Aventador!
:blackrs4: I don't think the human skeleton could take that punishment :wink:
2006 RS4
Phantom black
MRC Stage 2, Milltek non res, pre cat delete,
Image
Top
User avatar
Jules
Top Gear
Posts: 2416
Joined: Tue Jun 12, 2007 10:13 pm
Location: Cheshire/Derbyshire

Re: RS4 take 2

Post by Jules » Fri Jan 06, 2017 2:45 pm

Early flirt from work today as off to fit my new bigger front brakes 8)
Drive low,park lower
Top
User avatar
Mr Footlong
Cruising
Posts: 4331
Joined: Thu Nov 10, 2011 12:07 pm

Re: RS4 take 2

Post by Mr Footlong » Fri Jan 06, 2017 4:14 pm

I haven't read through most of this thread, but there is no way in hell that Codfather hasn't seen this and blown his load absolutely everywhere......
fapfapfap.jpg
Current:

23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung

Gone:

"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.
Top
User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: RS4 take 2

Post by MikeFish » Fri Jan 06, 2017 8:06 pm

Come on then, where's the hoots of these big brakes (and details if not obvious).
Top
User avatar
Jules
Top Gear
Posts: 2416
Joined: Tue Jun 12, 2007 10:13 pm
Location: Cheshire/Derbyshire

Re: RS4 take 2

Post by Jules » Mon Jan 09, 2017 10:27 am

So I got the brakes fitted and went for the nearly new tarox that were for sale on here with Revolution.

Just the 12 pots this time and 395mm discs.

I do have ceramics but as I'm selling the b7 mid next year I thought id keep the ramics for the b5 I'm building.
I really don't know why I'm doing all this to the b7 but I cant help myself :roll: :lol:

Its really surprised me how much I am really enjoying driving a b7 again.
Image
Image
Drive low,park lower
Top
DavidRS4
4th Gear
Posts: 663
Joined: Thu Jan 19, 2012 11:16 am
Location: Colchester

Re: RS4 take 2

Post by DavidRS4 » Mon Jan 09, 2017 11:21 am

Lovely brakes. Was going to buy them myself but wouldn't fit under my wheels because of the barrel through the middle:bash:
B7 RS4 Saloon, Phantom Black, Forge Oil Cooler Kit, 20 x 10.5j Vossens, Carbon Front Splitter, KW V3 Coilovers, Adjustable Front Arms, 20mm Spacers, Revolution Carbon Air Box, Rear 4 Pot Porsche Brake Conversion, Stud & Nut Kit, Milltek Non Res Non Valved Exhaust, RS6 Gloss Black Grill, Slightly Tinted Windows, JH Motorsports Stage 3R Clutch & Lightweight Flywheel, Robnic Braided Clutch Line. JH Motorsports Lightweight Grooved F & R Rotors with Braided Hoses and Hawk Pads
Top
User avatar
Jules
Top Gear
Posts: 2416
Joined: Tue Jun 12, 2007 10:13 pm
Location: Cheshire/Derbyshire

Re: RS4 take 2

Post by Jules » Mon Jan 09, 2017 11:31 am

DavidRS4 wrote:Lovely brakes. Was going to buy them myself but wouldn't fit under my wheels because of the barrel through the middle:bash:
Thanks Mate

They do actually just fit with literally a few mm clearance as I have the stepped in barrel too.
The only thing I had to do was use motorcycle smaller valves on the front but I had got them in already as remember
having the same issue with my 16 pots
Drive low,park lower
Top
User avatar
Mr Footlong
Cruising
Posts: 4331
Joined: Thu Nov 10, 2011 12:07 pm

Re: RS4 take 2

Post by Mr Footlong » Mon Jan 09, 2017 12:02 pm

Christ, seeing those Tarox brakes on a 4 always get me so damned moist.
Current:

23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung

Gone:

"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.
Top
User avatar
Jules
Top Gear
Posts: 2416
Joined: Tue Jun 12, 2007 10:13 pm
Location: Cheshire/Derbyshire

Re: RS4 take 2

Post by Jules » Mon Jan 09, 2017 12:48 pm

Mr Footlong wrote:Christ, seeing those Tarox brakes on a 4 always get me so damned moist.
Cheers mate :beerchug: :lol: :lol:
Drive low,park lower
Top
bam_bam
Cruising
Posts: 14440
Joined: Mon Jan 18, 2010 9:08 pm
Location: London

Re: RS4 take 2

Post by bam_bam » Mon Jan 09, 2017 2:09 pm

Jules wrote:
Mr Footlong wrote:Christ, seeing those Tarox brakes on a 4 always get me so damned moist.
Cheers mate :beerchug: :lol: :lol:
Really?! You're cheering the fact that he got moist?
So Footers gets cheered for showing a bit of pre-cum but I get consistently lambasted for being 'a bit too acerbic'.
I can't figure this place out.
No matter where you go, there you are.
Top
User avatar
Mr Footlong
Cruising
Posts: 4331
Joined: Thu Nov 10, 2011 12:07 pm

Re: RS4 take 2

Post by Mr Footlong » Mon Jan 09, 2017 2:28 pm

People probably just want you to bugger off back to Oz dear boy.
Current:

23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung

Gone:

"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.
Top
User avatar
Jules
Top Gear
Posts: 2416
Joined: Tue Jun 12, 2007 10:13 pm
Location: Cheshire/Derbyshire

Re: RS4 take 2

Post by Jules » Mon Jan 09, 2017 2:37 pm

bam_bam wrote:
Jules wrote:
Mr Footlong wrote:Christ, seeing those Tarox brakes on a 4 always get me so damned moist.
Cheers mate :beerchug: :lol: :lol:
Really?! You're cheering the fact that he got moist?
So Footers gets cheered for showing a bit of pre-cum but I get consistently lambasted for being 'a bit too acerbic'.
I can't figure this place out.
It was a first for making a footlong moist for me so wanted to show some recognition :lol:

I'm blacking the rails Saturday so even you make like once a little more stealth :sekret: :lol:
Drive low,park lower
Top
Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: Google Adsense [Bot], Majestic-12 [Bot] and 88 guests