More pictures - RS6 C7 completed by us with new ADV.1 wheels

4.0 V8 40v biturbo TFSI - 553 bhp
4.0 V8 40v biturbo TFSI - 597 bhp (Performance)
prestigewheelcentre
Trader (Expired)
Posts: 288
Joined: Mon Sep 01, 2014 7:22 pm
Location: Birmingham
Contact:

More pictures - RS6 C7 completed by us with new ADV.1 wheels

Post by prestigewheelcentre » Tue Oct 13, 2015 8:11 pm

We wanted to share some images prior to them being published on ADV.1s website of this Merlin Purple RS6 we fitted out with new wheels. This car was also lowered via Plush Automotive on Accuair E-level air suspension (fully adjustable) and then we installed a full Miltek exhaust system and ADV.1 wheels. The pictures taken with the car at its lowest setting.

The wheel specs are as follows.

ADV10 Track spec SL Series

Matt black face with Gloss black outer lips

Hidden hardware

21x10 front
21x10 rear (deeper concave)

We advised the client to use a 10j rear, which allows for better drive-ability and also does not let the stock 285/30r21 tyres stretch on that rim. The lower offset rear wheels allows us to build a deep concave rear wheel without going wider which we believe is better on an all wheel drive Audi.

Any questions then please feel free.

Enjoy!

Image

Image

Image

Image

Image

Image

Image
Vossen Wheels | HRE Wheels | ADV.1 Wheels | Forgeline | Miltek | iPE Exhausts | Akrapovic






www.PrestigeWheelCentre.co.uk

Facebook Page | Instagram Page | Gallery Images

User avatar
chunky79
Cruising
Posts: 11517
Joined: Sun Feb 25, 2007 11:51 am
Location: West Mids

Re: More pictures - RS6 C7 completed by us with new ADV.1 wh

Post by chunky79 » Tue Oct 13, 2015 9:16 pm

Pics haven't come on?
previous- Pug 205 gti, 306 gti, 309 gti Goodwood.
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.

Now - Empty garage

If you don't know where you're going, any road will take you there!

prestigewheelcentre
Trader (Expired)
Posts: 288
Joined: Mon Sep 01, 2014 7:22 pm
Location: Birmingham
Contact:

Re: More pictures - RS6 C7 completed by us with new ADV.1 wh

Post by prestigewheelcentre » Tue Oct 13, 2015 9:35 pm

Not just yet. Should be on there by the weekend
Vossen Wheels | HRE Wheels | ADV.1 Wheels | Forgeline | Miltek | iPE Exhausts | Akrapovic






www.PrestigeWheelCentre.co.uk

Facebook Page | Instagram Page | Gallery Images

M1R XE
4th Gear
Posts: 534
Joined: Tue Dec 11, 2012 12:07 am

Re: More pictures - RS6 C7 completed by us with new ADV.1 wh

Post by M1R XE » Tue Oct 13, 2015 11:16 pm

That's that pre face lift FL64 car, know of the car few people had it lovely sepang blue then sure was wrapped black. And even featured in a review on YouTube type in RS6 few vids down pic of a sepang RS6 in back by Lord aleem. Never the less the car looks stunning now but very brave to have it re painted all. The air looks fantastic too personally wouldn't have it but great work from you guys Although looks like spitting dabs of Wayne Simpsons RS6. :beerchug:

prestigewheelcentre
Trader (Expired)
Posts: 288
Joined: Mon Sep 01, 2014 7:22 pm
Location: Birmingham
Contact:

Re: More pictures - RS6 C7 completed by us with new ADV.1 wh

Post by prestigewheelcentre » Sun Oct 18, 2015 1:37 pm

Some more pictures as at seems some cant view them, so trying our luck on a PC this time. :wink:

Full gallery can be seen on

http://adv1wheels.com/gallery/audi/audi ... ellaflush/


Image

Image

Image

Image

Image

Image
Attachments
3Z0X6SWCgte95SWGMMyiSdfEUY0vFjSuk6-d2Dm4EZE.jpeg
3SQFVQwtqt56CoX9gwGf73bagWoI6UEqArwSGNr2r-E.jpeg
aDPOa2sqvJkh5F9iOqHWF_eOP7mrTX3MTgklm8qPq8c.jpeg
2GBOi6kJ9sSXY4IWN8q1flrQXJcwKqhHpLKi8QA93j0.jpeg
e9ZrFlYjw1X5exrbkSU1LV9d1-Ei-JMJvOzhOW9DdcE.jpeg
ua1dwCRat10Rnv8FOcFpbZb3I_RE-2SMwwrMS9u2fyU.jpeg
Nk2GLwFRUKL25KwGW1Hj1TAJ6_GGznfw-3RzDbTLF7w.jpeg
Vossen Wheels | HRE Wheels | ADV.1 Wheels | Forgeline | Miltek | iPE Exhausts | Akrapovic






www.PrestigeWheelCentre.co.uk

Facebook Page | Instagram Page | Gallery Images

User avatar
Brooner
Cruising
Posts: 3978
Joined: Mon Jan 20, 2003 5:12 am
Location: Scotlandshire

Re: More pictures - RS6 C7 completed by us with new ADV.1 wh

Post by Brooner » Sun Oct 18, 2015 2:28 pm

nice the black and purple pity the slammed the car looks like the suspension is fooked
2018 B9 RS4 Navarra Blue
2013 B8 RS4 Sepang Blue
2007 B7 RS4 Avant Sprint Blue
2001 B5 RS4 Nogaro Blue
1998 B5 S4 Avant Kingfisher Blue
1993 B4 S2 Avant laser Red

S4WON
Top Gear
Posts: 1775
Joined: Sun Apr 19, 2009 8:30 pm

Re: More pictures - RS6 C7 completed by us with new ADV.1 wh

Post by S4WON » Sun Oct 18, 2015 2:47 pm

Too low for me, looks like the suspension is knackered!

Yours Old Git

doodlebug
Cruising
Posts: 5833
Joined: Thu Dec 18, 2008 11:56 am
Location: Somewhere. Maybe.

Re: More pictures - RS6 C7 completed by us with new ADV.1 wh

Post by doodlebug » Sun Oct 18, 2015 3:00 pm

Ditto.

How is that practical?

Too Demon Tweeks for my liking.

prestigewheelcentre
Trader (Expired)
Posts: 288
Joined: Mon Sep 01, 2014 7:22 pm
Location: Birmingham
Contact:

Re: More pictures - RS6 C7 completed by us with new ADV.1 wh

Post by prestigewheelcentre » Sun Oct 18, 2015 3:02 pm

This car was fitted with with Accuair E level suspension, so the car is set at its lowest ride height. To be fair you cant drive it that low and is extreme but you can set it at any level you like.
Vossen Wheels | HRE Wheels | ADV.1 Wheels | Forgeline | Miltek | iPE Exhausts | Akrapovic






www.PrestigeWheelCentre.co.uk

Facebook Page | Instagram Page | Gallery Images

bam_bam
Cruising
Posts: 14440
Joined: Mon Jan 18, 2010 9:08 pm
Location: London

Re: More pictures - RS6 C7 completed by us with new ADV.1 wh

Post by bam_bam » Sun Oct 18, 2015 3:28 pm

prestigewheelcentre wrote:This car was fitted with with Accuair E level suspension, so the car is set at its lowest ride height. To be fair you cant drive it that low and is extreme but you can set it at any level you like.
So if you cannot drive it at that height, why set it to that height?
No matter where you go, there you are.

Markp
5th Gear
Posts: 1119
Joined: Sun Sep 13, 2015 10:47 pm

Re: More pictures - RS6 C7 completed by us with new ADV.1 wh

Post by Markp » Sun Oct 18, 2015 4:08 pm

Wheels are OK but the car looks ridiculous set up like that. One of the main attributes of the RS6 is subtle menace. Slamming it like that makes it look like something out of Max Power. IMO anyway.

wildbore
4th Gear
Posts: 659
Joined: Fri Mar 21, 2014 6:29 pm
Location: Surrey

Re: More pictures - RS6 C7 completed by us with new ADV.1 wh

Post by wildbore » Sun Oct 18, 2015 4:27 pm

TBH, I find the pics that you post to show off your wheels rather puzzling. You post the pics - I assume - in the hope that someone will buy the wheels, which is fair enough, as some of them are very nice wheels.
But (and here I may be very wide of the mark) I suspect that, by the time your target customer has earned enough money in life to buy an RS6 and then enough more to buy some fancy wheels (whilst putting the already expensive factory items to one side), they have rather moved beyond lusting after a Southend-seafront slammed Golf.

I have seen quite a few RS6s since I bought mine, including some great paint colours that are far more adventurous than my black car, which indicates that some owners are not shy about making their cars stand out from the crowd; but I have yet to see one that looks like an elephant sat on it recently, which rather leads me to suspect that you might get a more favourable reaction to your marketing efforts if you stuck your wheels on a more normal-looking car.

I, for one, might be more tempted to buy your wheels if I could envisage myself driving the car in the pic. As it turns out, nobody can drive this one as it is unfeasibly low.

Just a thought.

prestigewheelcentre
Trader (Expired)
Posts: 288
Joined: Mon Sep 01, 2014 7:22 pm
Location: Birmingham
Contact:

Re: More pictures - RS6 C7 completed by us with new ADV.1 wh

Post by prestigewheelcentre » Sun Oct 18, 2015 5:00 pm

wildbore wrote:TBH, I find the pics that you post to show off your wheels rather puzzling. You post the pics - I assume - in the hope that someone will buy the wheels, which is fair enough, as some of them are very nice wheels.
But (and here I may be very wide of the mark) I suspect that, by the time your target customer has earned enough money in life to buy an RS6 and then enough more to buy some fancy wheels (whilst putting the already expensive factory items to one side), they have rather moved beyond lusting after a Southend-seafront slammed Golf.

I have seen quite a few RS6s since I bought mine, including some great paint colours that are far more adventurous than my black car, which indicates that some owners are not shy about making their cars stand out from the crowd; but I have yet to see one that looks like an elephant sat on it recently, which rather leads me to suspect that you might get a more favourable reaction to your marketing efforts if you stuck your wheels on a more normal-looking car.

I, for one, might be more tempted to buy your wheels if I could envisage myself driving the car in the pic. As it turns out, nobody can drive this one as it is unfeasibly low.

Just a thought.
Accuair adjustable air suspension inst for everyone and we are well aware of that, in fact I only know of 3 RS6 C7 cars fitted with this however as mentioned this is totally adjustable by a control unit mounted in the car. You can programme this to sit at various levels and change between them at the touch of a button and it so happened we took pics of this on the low setting...just different I guess, but ultimately its good to show different cars with wheels mounted rather than just images of wheels.

Actually we just like sharing the work we do and yes we sell wheels but its more than just business....we actually enjoy enhancing / customising cars.

Maybe check out some of the other cars we have done with ride heights you prefer :bigblink:

https://www.flickr.com/photos/prestigewheels/albums
Vossen Wheels | HRE Wheels | ADV.1 Wheels | Forgeline | Miltek | iPE Exhausts | Akrapovic






www.PrestigeWheelCentre.co.uk

Facebook Page | Instagram Page | Gallery Images

prestigewheelcentre
Trader (Expired)
Posts: 288
Joined: Mon Sep 01, 2014 7:22 pm
Location: Birmingham
Contact:

Re: More pictures - RS6 C7 completed by us with new ADV.1 wh

Post by prestigewheelcentre » Sun Oct 18, 2015 5:01 pm

BTW we dont supply Accuair, but do supply Eibach, H&R and KW kits.
Vossen Wheels | HRE Wheels | ADV.1 Wheels | Forgeline | Miltek | iPE Exhausts | Akrapovic






www.PrestigeWheelCentre.co.uk

Facebook Page | Instagram Page | Gallery Images

User avatar
chunky79
Cruising
Posts: 11517
Joined: Sun Feb 25, 2007 11:51 am
Location: West Mids

Re: More pictures - RS6 C7 completed by us with new ADV.1 wh

Post by chunky79 » Sun Oct 18, 2015 5:16 pm

Think the wheels look pretty good, BUT, a slammed C7 makes the rear look even uglier, didn't think that was possible!
previous- Pug 205 gti, 306 gti, 309 gti Goodwood.
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.

Now - Empty garage

If you don't know where you're going, any road will take you there!

Post Reply

Return to “RS6 (C7 Typ 4G) 2013-2018”

Who is online

Users browsing this forum: No registered users and 89 guests