Anyone planning on upgrades to their b8

[BMW2RS4]

Did u take those pics with a VGA camera

These images were resized as I am used to posting to the E90Post where 680 x 480 is the maximum; seems that this isn't the case on this forum.

I have to say that the process is much less complicated over there!

[bam_bam]

Did u take those pics with a VGA camera

[HYFR]

Bam, if you don't need that camera any more, stick it on E90 Post classifieds, should get snapped up in no time

[bam_bam]

I would but that forum only takes punch cards for posting picture binaries.

[BMW2RS4]

And the old "banter" forum kicks in again

[Brooner]

hows the ride in dynamic is it any harder as it does look a nice height not slammed to the floor

[BMW2RS4]

hows the ride in dynamic is it any harder as it does look a nice height not slammed to the floor

I don't sense a difference tbh. The ride in both comfort and dynamic has improved as the springs have bedded in and I no longer feel that there is any difference to stock in both.

[Brooner]

where they fitted by an indy or Audi and did it require the DRC to be bleed down and re pressureized??

[BMW2RS4]

where they fitted by an indy or Audi and did it require the DRC to be bleed down and re pressureized??

It was fitted by Demon Tweeks of Wrexham. They didn't disconnect the DRC during the install.

[RIV]

What's the drop on the KW's 20 mm ?

[MK2Golf24v]

where they fitted by an indy or Audi and did it require the DRC to be bleed down and re pressureized??

The KW Insturctions state not to disconnect the DRC

where they fitted by an indy or Audi and did it require the DRC to be bleed down and re pressureized??

It was fitted by Demon Tweeks of Wrexham. They didn't disconnect the DRC during the install.

How did they re-calibrate the Adaptive cruise etc?

[BMW2RS4]

What's the drop on the KW's 20 mm ?

I think that the range is 5mm - 25mm. I reckon that there is another 10mm left on nearside and 20mm on offside if I wanted it lower.

How did they re-calibrate the Adaptive cruise etc?

They didn't; but it all works absolutely fine. The KW coilover spring kit is the one fitted by MTM. I spoke with Kim at MTM and the only requirement was that the DRC was not disconnected during install.

[Brooner]

it's pain that all the decant places for these sort of things are atleast 8hrs drive away from up here in Jocklandshire

[HYFR]

For Silas

ImageUploadedByTapatalk1406143987.284964.jpg

ImageUploadedByTapatalk1406143996.750446.jpg

ImageUploadedByTapatalk1406144005.329528.jpg

ImageUploadedByTapatalk1406144011.898029.jpg

ImageUploadedByTapatalk1406144019.647222.jpg

[SWRS4]

Pictures of RS4 lowered with KW coilover springs as promised (apologies for poor photography skills)

1583

1584

1586

1585

1587

Ride height looks perfect!!