Bolster repair anyone had it done???

4.2 V8 32v Naturally Aspirated - 414 bhp
myles
Neutral
Posts: 43
Joined: Sat Nov 02, 2013 10:46 pm

Bolster repair anyone had it done???

Post by myles » Tue Nov 12, 2013 2:31 pm

Has anyone had there bolster repaired or re-trimmed... if so any before and after pics please

Mine has some slight wear to the inside and outside of the bolster - drivers seat...

Booked in to get it re-trimmed and all the leather treated to take the shine away..

Myles :biggrin3: :biggrin3:

User avatar
hlbeckley
4th Gear
Posts: 596
Joined: Thu Nov 13, 2008 3:02 pm

Re: Bolster repair anyone had it done???

Post by hlbeckley » Tue Nov 12, 2013 4:39 pm

Mine was done at dealer, just on bolster will take after pics

myles
Neutral
Posts: 43
Joined: Sat Nov 02, 2013 10:46 pm

Re: Bolster repair anyone had it done???

Post by myles » Tue Nov 12, 2013 5:06 pm

thanks ill post before and after pics once done.... it was the only negative bit about the car when i bought it two weeks ago...

Im just OCD when its comes to my cars so it has to be sorted ha.. :jump:

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Bolster repair anyone had it done???

Post by MikeFish » Tue Nov 12, 2013 6:25 pm

Lets us know how you get on and of course tells us where you have it done.

andre3k
5th Gear
Posts: 1167
Joined: Sun Nov 21, 2010 8:33 pm

Re: Bolster repair anyone had it done???

Post by andre3k » Tue Nov 12, 2013 6:50 pm

Are you sure it's a retrim & not a repair? Not heard of someone doing a retrim on a small area like a bolster before, cool
Gone: Audi RS4 Avant, Alpina XD3, Smart Brabus, McLaren 12C,

User avatar
Stoffle32
3rd Gear
Posts: 283
Joined: Tue Nov 18, 2008 2:26 pm
Location: South Africa

Re: Bolster repair anyone had it done???

Post by Stoffle32 » Fri Nov 15, 2013 3:52 pm

I've seen some one done at a dealership bolster was replaced. Looked alright you only noticed if you knew what you where looking for...

myles
Neutral
Posts: 43
Joined: Sat Nov 02, 2013 10:46 pm

Re: Bolster repair anyone had it done???

Post by myles » Sat Nov 23, 2013 5:43 pm

As you can see my drivers seat was in a worn state.. both lower and upper bolster were shot...

Seat has had upper and lower bolster re-trim and re padded... some slack taken out of the base... im happy with the end result.. had to bare in mind that it will take a while for the new leather to look a bit worn against the old.... :D

before and after pics
Attachments
20131123_074152.jpg
20131123_074308.jpg
20131123_154155.jpg
20131123_154258.jpg
20131123_154319.jpg

DAC
1st Gear
Posts: 69
Joined: Tue Nov 15, 2011 9:25 pm
Location: North of Scotland

Re: Bolster repair anyone had it done???

Post by DAC » Sat Nov 23, 2013 9:16 pm

That looks a lot better, they look to have done a good job
Who did the repair for you & now much did they charge you if you don't mind me asking
RS4 Phantom Black Saloon

myles
Neutral
Posts: 43
Joined: Sat Nov 02, 2013 10:46 pm

Re: Bolster repair anyone had it done???

Post by myles » Sun Nov 24, 2013 7:34 pm

yeah it looks so much better.. The only thing that let my car down when it was purchased tbh... i had it done at auto trim in Manchester £300..

WillRS
3rd Gear
Posts: 329
Joined: Thu Nov 29, 2012 10:29 am
Location: Hampshire

Re: Bolster repair anyone had it done???

Post by WillRS » Mon Nov 25, 2013 2:17 pm

looks very good - is there anywhere "daaan saaaatthh" thats good ? Most of the *well reviewed* retrimmers seem to be up north

how long did that work take ?
Currently: C63 AMG 507 Edition Coupe - Polar white
Previously : 997 Turbo - Meteor Grey, Audi B7 RS4 Saloon - Phantom Black, Audi RS3 - Daytona Grey, Abarth 500, MK2 Ford Focus RS, LS3 VXR8, Monaro VXR, MK4 Golf R32, Leon Cupra R, MK1 Cliosport 172, MK3 Golf VR6 Highline

myles
Neutral
Posts: 43
Joined: Sat Nov 02, 2013 10:46 pm

Re: Bolster repair anyone had it done???

Post by myles » Mon Nov 25, 2013 10:06 pm

There are quite a few car interior specialist down south.. i dropped the car off sat 8am and had it back 2pm.....how bad is your wear... does it just need leather painting or re-trim

Fatneck73
4th Gear
Posts: 957
Joined: Sun Apr 17, 2011 9:02 pm
Location: Essex

Re: Bolster repair anyone had it done???

Post by Fatneck73 » Mon Nov 25, 2013 10:22 pm

I'm getting an M3 done soon...from a main dealer in Essex Will take some before and after Piccys and let you know.

WillRS
3rd Gear
Posts: 329
Joined: Thu Nov 29, 2012 10:29 am
Location: Hampshire

Re: Bolster repair anyone had it done???

Post by WillRS » Mon Nov 25, 2013 10:23 pm

myles wrote:There are quite a few car interior specialist down south.. i dropped the car off sat 8am and had it back 2pm.....how bad is your wear... does it just need leather painting or re-trim
side bolster just needs painting (no actual damage just worn a bit)

thigh bolster is a bit shiny and a tiny bit of the stitching has worn away

bottom is a bit saggy (seat not mine!) and probably needs some slack taking out.

thats a very good turnaround 8am - 2pm ! I had days in mind (and having to send seat off somewhere)
Currently: C63 AMG 507 Edition Coupe - Polar white
Previously : 997 Turbo - Meteor Grey, Audi B7 RS4 Saloon - Phantom Black, Audi RS3 - Daytona Grey, Abarth 500, MK2 Ford Focus RS, LS3 VXR8, Monaro VXR, MK4 Golf R32, Leon Cupra R, MK1 Cliosport 172, MK3 Golf VR6 Highline

User avatar
maizyboy
Neutral
Posts: 45
Joined: Thu Mar 27, 2008 9:34 pm

Re: Bolster repair anyone had it done???

Post by maizyboy » Thu Nov 28, 2013 9:40 am

Great work and great photos. Can we get details on who did the work and how much please? Mine are worn and the seat a bit saggy too.
Current : Sprint Blue B7 RS4 avant.
Previous: Sprint Blue B7 S4 saloon, Nogaro Blue B5 S4 saloon, Porsche Boxster, Audi Coupe S2, Audi Coupe 2.8E

myles
Neutral
Posts: 43
Joined: Sat Nov 02, 2013 10:46 pm

Re: Bolster repair anyone had it done???

Post by myles » Thu Nov 28, 2013 11:47 pm

yeah sure.... Auto-trim in manchester did the work £300 .. upper and lower bolster re-trim, upper and lower bolster re-padded also...Some slack taken out of the base.... :biggrin3:


this is how bad the bolster was and needed the re-trim.. A quick leather paint would not have done the job....
Attachments
20131123_074208.jpg

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: Google Adsense [Bot], MTBear and 119 guests