If you like wide arches.....
Re: If you like wide arches.....
Do you think they will make me one
Re: If you like wide arches.....
Looks great!! Just need oval tail pipes to finish the rear look, IMO that is
Re: If you like wide arches.....
I prefer the quads, but then I would wouldn't I.Silas wrote:Looks great!! Just need oval tail pipes to finish the rear look, IMO that is
Re: If you like wide arches.....
Thanks!Silas wrote:Looks great!! Just need oval tail pipes to finish the rear look, IMO that is
Oval pipes = RS, it's not my intention to turn this into an RS wannabe. I LURVE arches, that's all

Saying that, I am very tempted by the RS honeycomb front grille..... I MIGHT consider this for my next project - considering a bespoke front bumper to make the front more aggressive.
Re: If you like wide arches.....
Can understand that, but when looking at the boldness of the body work and stance the exhaust look a little weedy in comparison, nothing to do with making it look like an rs4, just think it would look real nice, I'm no good with photo shop, someone do the deed to see what it looks like, just out of interestOval pipes = RS, it's not my intention to turn this into an RS wannabe. I LURVE arches, that's all

-
- 4th Gear
- Posts: 533
- Joined: Tue May 03, 2011 10:55 am
- Location: Scotland somewhere
Re: If you like wide arches.....
LOVE IT
one thing i would do would be a set of even deeper dish rims , instead of the spacers , it does look OEM from the side and is cool but a set of low or - offset rims would be absolutely stunning 


Phantom black saloon ,PES M112 Supercharged 520ps/595nm K&N filter, 100 cell milltek cats,res valved milltek system. 8 and 10mm H&R spacers.H&R roll bars, "smoke chrome " alloy refurb. JHM Quickshifter, Bilstein B16 coilovers , uprated diff mount ,50/50 devils own WM kit so 1.4 litres/min in intake approx 10% more power and torque
1/4 mile 12.01 secs 123.5mph
1/4 mile 12.01 secs 123.5mph
Re: If you like wide arches.....
Your car looks OEM and professionally done, congratulations on a top job and a beautiful car.
You should park at Audi HQ in MK. A senior amoeba from Audi might see it and be inspired to evolve a brain and make a B8 RS4 Saloon.
You should park at Audi HQ in MK. A senior amoeba from Audi might see it and be inspired to evolve a brain and make a B8 RS4 Saloon.
RS4 B7, Mugello Blue, K&W V3 & HR ARBs, set up by Centre Gravity, Milltek Valved Non Res & cat bypass pipes, BMC air filter, braided hoses, DOT 5.1, Terraclean, MRC Full Carbon Clean, MRC remap 448PS 477NM, 20" S7 alloys with 4mm spacers & Hawke spigots 66.6 > 57.1, AP Racing front discs. Sold Sept 2019. Now rocking an F80 M3
Re: If you like wide arches.....
I like the design of HRE's flow form FF01, but would prefer them to be more concave. The pricey HRE versions appear too complicated to my eyes...rwilsonrs4 wrote:LOVE ITone thing i would do would be a set of even deeper dish rims , instead of the spacers , it does look OEM from the side and is cool but a set of low or - offset rims would be absolutely stunning
The TSW Nurburgring wheel looks good but I'm not confident on quality. I believe in getting what you pay for!
Re: If you like wide arches.....
Covkiller wrote:Your car looks OEM and professionally done, congratulations on a top job and a beautiful car.
You should park at Audi HQ in MK. A senior amoeba from Audi might see it and be inspired to evolve a brain and make a B8 RS4 Saloon.

An American s4 owner is having RS4 avant fenders and bumpers fitted to his face lift b8 s4 saloon, would be interesting to see how this pans out....
PS your car specs are impressive!

Re: If you like wide arches.....
do you have a link to the build?S4 CKR wrote:Covkiller wrote:Your car looks OEM and professionally done, congratulations on a top job and a beautiful car.
You should park at Audi HQ in MK. A senior amoeba from Audi might see it and be inspired to evolve a brain and make a B8 RS4 Saloon.LOL, thanks for the kind words!
An American s4 owner is having RS4 avant fenders and bumpers fitted to his face lift b8 s4 saloon, would be interesting to see how this pans out....
PS your car specs are impressive!
Re: If you like wide arches.....






WOW just.... WOW
The mods done to this car and they way it's turned out is right up my street, LOVE IT!
Seriously well done, amazed by how OEM and unique it is now, suits the white so well too.
From here, I would be thinking wheels wheels wheels, with those arches you could run so many options too
Instagram : n_i_l_s
Re: If you like wide arches.....
This is it :Rick_RS4 wrote:do you have a link to the build?S4 CKR wrote:Covkiller wrote:Your car looks OEM and professionally done, congratulations on a top job and a beautiful car.
You should park at Audi HQ in MK. A senior amoeba from Audi might see it and be inspired to evolve a brain and make a B8 RS4 Saloon.LOL, thanks for the kind words!
An American s4 owner is having RS4 avant fenders and bumpers fitted to his face lift b8 s4 saloon, would be interesting to see how this pans out....
PS your car specs are impressive!
http://www.audizine.com/forum/showthrea ... t-Underway
Re: If you like wide arches.....
Thank youN11LS_J wrote:![]()
![]()
![]()
![]()
![]()
![]()
WOW just.... WOW
The mods done to this car and they way it's turned out is right up my street, LOVE IT!
Seriously well done, amazed by how OEM and unique it is now, suits the white so well too.
From here, I would be thinking wheels wheels wheels, with those arches you could run so many options too

If this was your car, what wheels would you consider?
Re: If you like wide arches.....
thanksS4 CKR wrote: This is it :
http://www.audizine.com/forum/showthrea ... t-Underway
Re: If you like wide arches.....
Hmmmm, that could end up looking like a proper UrQuattro homage if the blisters were pumped enough... it's a shame they aren't. Seems a waste to go through all that effort to not make it your own and just fall back on the safe and proven "let's put some RS arches on an non-RS version" play.S4 CKR wrote: This is it :
http://www.audizine.com/forum/showthrea ... t-Underway
OP, yours is by far more original, ballsy and considered execution, all that American clown did was cut some metal off an RS4 and graft it on, must've have been a real tax on his brain power and creative process coming up with that idea.
Yeah, I'm seein' it, yeah I'm hatin' it. In before the bla bla bla.
No matter where you go, there you are.
Who is online
Users browsing this forum: No registered users and 9 guests