Time to say hello

New to the forum? Say "hello"
Post Reply
hulk
Neutral
Posts: 8
Joined: Sun Apr 18, 2010 7:36 pm

Time to say hello

Post by hulk » Tue Nov 05, 2013 8:04 pm

After stalking the forum and what goes on here it's about time to say hello :bigwave:

Well if anybody knows me they will say watch this space and I'm sure my new toy will be something awesom. Well I say now just a few changes as it perfect as it is


Image

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Time to say hello

Post by MikeFish » Tue Nov 05, 2013 8:46 pm

Welcome and FON.

Now tells us what you've done to it so far and what you got planned. More pics too please.

Trups
Trader (Expired)
Posts: 1316
Joined: Sat Jun 09, 2012 8:38 pm

Re: Time to say hello

Post by Trups » Tue Nov 05, 2013 9:32 pm

MikeFish wrote:Welcome and FON.

Now tells us what you've done to it so far and what you got planned. More pics too please.
Looks like Vicks car.

H an R ultra low coil overs, JC weldfab exhaust, refurbed calipers.. Well that's if its the car im on about.
Phantom Black C6 RS6 - ex Classba battleship
Mugello C6 RS6 5.0 TFSi AVANT - Gone.

If you have any quieries for interior or exterior LED's then get in touch.

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Time to say hello

Post by MikeFish » Tue Nov 05, 2013 9:56 pm

There was talk of vic's ar in Jules' thread so you could be right. I don't know who vic is though.

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Time to say hello

Post by MikeFish » Tue Nov 05, 2013 9:57 pm

Trups wrote:
MikeFish wrote:Welcome and FON.

Now tells us what you've done to it so far and what you got planned. More pics too please.
Looks like Vicks car.

H an R ultra low coil overs, JC weldfab exhaust, refurbed calipers.. Well that's if its the car im on about.
Surely that front is too low to drive? I'd like mine that low but it must be rubbing already.

m14rrv
2nd Gear
Posts: 187
Joined: Mon Apr 26, 2010 8:44 pm
Location: darlington

Re: Time to say hello

Post by m14rrv » Tue Nov 05, 2013 10:48 pm

he running 245 30 20 tyres if i remember rightly, my old wheels, exhaust is insane, louder than yours mike fish lol
b7 rs4 avant

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Time to say hello

Post by MikeFish » Tue Nov 05, 2013 11:26 pm

m14rrv wrote:he running 245 30 20 tyres if i remember rightly, my old wheels, exhaust is insane, louder than yours mike fish lol
They don't look like 20s to me. Maybe the lower profile from the 245s makes the wheels look bigger. But it's not the width that cause the front to rub when it's that low, it's the wheel arch hitting the top of the tyre when your are cornering at speed and hit a bump.

And the exhaust can't be louder than mine, you'd need to drive with ear defenders! :biggrin3:

User avatar
MikeFish
Cruising
Posts: 15588
Joined: Tue Aug 31, 2010 9:23 pm
Location: The Middle of Somewhere

Re: Time to say hello

Post by MikeFish » Tue Nov 05, 2013 11:30 pm

What colour is it? I'm assuming it's Daytona? Is it the same car I posted a photo of in the RS4 picture thread (probably back on page 1 or 2)?

And where was that photo taken? That's a very unusual looking street with the block paved road.

User avatar
Jules
Top Gear
Posts: 2416
Joined: Tue Jun 12, 2007 10:13 pm
Location: Cheshire/Derbyshire

Re: Time to say hello

Post by Jules » Wed Nov 06, 2013 9:55 am

Welcome Hulk

Youve certainly got a good car,i had a look over it the other day at the breakfast meet :beerchug:

Yeah id leave it just as it is :assflash: :lol: :lol:
Drive low,park lower

User avatar
edge
5th Gear
Posts: 1165
Joined: Tue Jul 06, 2010 3:17 pm
Location: Ireland

Re: Time to say hello

Post by edge » Wed Nov 06, 2013 4:25 pm


hulk
Neutral
Posts: 8
Joined: Sun Apr 18, 2010 7:36 pm

Re: Time to say hello

Post by hulk » Fri Nov 08, 2013 11:11 pm

Well this is my car, now sold to Hulk. (He needs to collect it yet!) It's running H&R race suspension, full exhaust and the exhaust still looks perfect. Doesn't catch or rub anywhere. It's built with daily use in mind and my wife used this car daily. Never had an issue and to be honest, she can drive. I bought it as we had a Baby who is now 17 months old and its been perfect for our family.

Brakes are with new calipers stripped, rebuilt and painted Audi ceramic grey (can't remember the colour code) with yellow stuff pads front and rear.

Exhaust is JC weldfab full stainless, tig welded with high flow cats, per cats removed, down pipes, x pipe, valves back boxes. Sounds more like a lambo with sport on and oem quiet with a nicer tone, sport off. I wouldn't buy Milltek if my life depended on it as the quality In my opinion is inferior for the price.

Wheels are 9x20" Audi rotor wheels, et26 (thanks to Jules and Marv) with verdestien (sp) 245/30/20. It has not got the biggest mod list but for me it looks perfect and drives even better. I spent most of my money replacing trims and making this car nice and and clean.

Steesh
Neutral
Posts: 43
Joined: Sun Apr 28, 2013 2:10 pm
Location: Aberdeen

Re: Time to say hello

Post by Steesh » Sat Nov 09, 2013 11:28 am

Think i just saw this on the move on Instagram - looks very nice :thumbs:

Post Reply

Return to “Welcome Area”

Who is online

Users browsing this forum: No registered users and 16 guests