I thought they were made out of butter. Nice looking wheels, though, no doubt about it.RS6MTM wrote:Am I correct in saying they are Titanium? I know they certainly are very light, which helps if performance is your thing
What wheels for an RS6
Re: What wheels for an RS6
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Re: What wheels for an RS6
anyone think the b7 rs4 alloy wheels would look nice on the rs6 lowered with spacers?
Re: What wheels for an RS6
Yes, I think it looks really good. You don't need spacers, though. They already stick out 6mm further than the standard wheels.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Re: What wheels for an RS6
Aw nice one, anyone know of anybody got these on there 6 to get a wee look?Shoppinit wrote:Yes, I think it looks really good. You don't need spacers, though. They already stick out 6mm further than the standard wheels.
Re: What wheels for an RS6
I've posted a video of them in the past. Have a search.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."
Re: What wheels for an RS6
those are 20 inch, but youll get an idea...
- Attachments
-
If you can't go to the track, bring the track to you.
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g
Re: What wheels for an RS6
I still think the original wheels fit the car the best they just look right especially if they are plus colour or anthracite. Having come from the world of Mitsi Evo when the first thing you do is change the wheels.
I have been looking for nearly two year for new wheels for the 6 that look better than the original factory option and I haven't found any yet. Even some of the wheels in this thread make the car look just a bit chav it's only my opinion though
I have been looking for nearly two year for new wheels for the 6 that look better than the original factory option and I haven't found any yet. Even some of the wheels in this thread make the car look just a bit chav it's only my opinion though
Re: What wheels for an RS6
I agree, finding wheels for the C5 is very hard.
previous- Pug 205 gti, 306 gti, 309 gti Goodwood.
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.
Now - Empty garage
If you don't know where you're going, any road will take you there!
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.
Now - Empty garage
If you don't know where you're going, any road will take you there!
-
Mr Footlong
- Cruising
- Posts: 4331
- Joined: Thu Nov 10, 2011 12:07 pm
Re: What wheels for an RS6
Make me chuckle Mr "Part Worns", tell me mine look chavskirs6 wrote:Even some of the wheels in this thread make the car look just a bit chav it's only my opinion though
Current:
23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung
Gone:
"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.
23' C8 RS6 Vorsprung - 23' RS E-Tron GT Carbon Vorsprung
Gone:
"Brutus"- C5 RS6 Avant - MRC stage 2 - Milltek non-res + 100 cell cats - Wagner ICs - PSS9 - H&R ARBs - OZ Superturismo LM - C6 Custom brakes - HD RNS-E - Various other bits - 555PS/832Nm
"Taz"- C7 RS6 - MRC stage 2 745PS/1095Nm
12' Cayenne Turbo, B7 RS4, S3, Cupra R, XJR, EVO VII, STI8,5,2&WRX, 106 GTI&XSI, other crap.
Re: What wheels for an RS6
Ha Ha I knew that was coming but not quite that quick 
-
philipinoz
- Neutral
- Posts: 39
- Joined: Thu Apr 28, 2011 9:14 am
- Location: Brisbane, Australia
Re: What wheels for an RS6
I've gone and done this: 19x9 ET33 "peelers". I like the original standard C5 RS6 alloys, but they need serious refurb work (last owner visited lots of kerbs, and had removed the paint/polished them up). And then ebay delivered, yay! I'm v happy with the look. Now I can refurb the originals at my leisure...
2014 RS6 (Daytona Grey)
Previous Drives: Astra -> Cavalier SRi -> Audi 90q -> A4 2.8q -> A4 2.4q -> Mercedes ML430 (Carlsson) -> RS6 C5
Previous Drives: Astra -> Cavalier SRi -> Audi 90q -> A4 2.8q -> A4 2.4q -> Mercedes ML430 (Carlsson) -> RS6 C5