What works for some people (but not all like I said earlier) is to set the volume you want, exit Engineering Mode then completely turn off the RNS-E (i.e. lock the car and wait a short while - as the RNS-E stays turned on until either you lock the car or 30 minutes after you turn off the ignition).MikeFish wrote:Thanks Dave, seen it now, but it just tells me what the volume is currently set at. I don't see any way of adjusting. If if turn the volume up to lets say max (30) then go come out of that menu, turn the volume down then go back in, it just shows me what the volume is currently set at.
Then unlock the car and turn the RNS-E on, if it's worked then the startup volume will have changed - but as I said before, this doesn't work in every case and in 7+ years nobody I know has worked out why it does or doesn't work.