i know done to death before ...what pads for road use ?

4.2 V8 32v Naturally Aspirated - 414 bhp
Post Reply
rwilsonrs4
4th Gear
Posts: 533
Joined: Tue May 03, 2011 10:55 am
Location: Scotland somewhere

i know done to death before ...what pads for road use ?

Post by rwilsonrs4 » Fri Feb 15, 2013 10:18 pm

Hi Guys , i have recently fitted H&R anti roll bars to my car and while underneath I saw that the inside pads wer getting down a bit so it wont be too much longer before I need new pads on the front , the pads in it are OEM pads ad I,m happy with the day to day performance of them, but was thinking of a change
After a few searchesI see that yellowstuff pads are popular , in the past I have found that greens and reds can be prone to squealing when cold , any comments on the yellows ?I will be retaining the wires so that rules out several types , the Pagid pads seem readily available but I doubt whether they are the same material as OEM at that price and am not keen on trying them unless anyone has any input /experience of them , I dont track the car , but it does get "used " :bigblink:
any Input or personal experiences appreciated :thumbs:
BTW its off to MRC newt week for mapping of the PES charger... eventually, after work commitments and the shiiite weather held things up and the large distance involved meaning it has to be transported :-(
Phantom black saloon ,PES M112 Supercharged 520ps/595nm K&N filter, 100 cell milltek cats,res valved milltek system. 8 and 10mm H&R spacers.H&R roll bars, "smoke chrome " alloy refurb. JHM Quickshifter, Bilstein B16 coilovers , uprated diff mount ,50/50 devils own WM kit so 1.4 litres/min in intake approx 10% more power and torque
1/4 mile 12.01 secs 123.5mph


User avatar
sakimano
5th Gear
Posts: 1365
Joined: Tue Oct 05, 2010 5:00 pm
Location: Oakville, Ontario, Canada

Re: i know done to death before ...what pads for road use ?

Post by sakimano » Sat Feb 16, 2013 12:18 am

Just installed carbotech pads. They're called bobcats, their street use pad. 1521 I believe. They feel fine, but they've only been on a short time.

Image

User avatar
Dal
2nd Gear
Posts: 149
Joined: Mon Sep 10, 2012 6:46 pm

Re: i know done to death before ...what pads for road use ?

Post by Dal » Sat Feb 16, 2013 12:32 am

I have just gone from OEM pads to ferodo Premier, I can't quite believe how good they are...For more fast road pads Carbotech are hard to beat.
B8 RS4 in the fastest colour :smile_smoking:

andymc
1st Gear
Posts: 95
Joined: Sun Feb 06, 2011 6:00 pm
Location: Surrey

Re: i know done to death before ...what pads for road use ?

Post by andymc » Sat Feb 16, 2013 2:05 am

Do Ferodo or Carbo have the built-in sensors like OEM?

Didn't somebody mention a replacement pad which was somewhat tougher on the discs than normal, building up a lip pretty quickly :S

User avatar
sakimano
5th Gear
Posts: 1365
Joined: Tue Oct 05, 2010 5:00 pm
Location: Oakville, Ontario, Canada

Re: i know done to death before ...what pads for road use ?

Post by sakimano » Sat Feb 16, 2013 4:25 am

Carbotech have the sensors.

I believe stoptech doesn't but you can use the ones from your old pads to trick the system.

User avatar
gareth_oau
2nd Gear
Posts: 233
Joined: Wed Mar 16, 2011 6:05 am

Re: i know done to death before ...what pads for road use ?

Post by gareth_oau » Tue Feb 19, 2013 8:35 am

I just stuck in a set of EBC Red Stuffs (with sensors), they were around $250 from Ebay.

They squeeled like a pig for about 1 week (very enmbarrassing), but all good now, and throw off a lot less dust than OEMs.

I only use on (spirited) streets

rwilsonrs4
4th Gear
Posts: 533
Joined: Tue May 03, 2011 10:55 am
Location: Scotland somewhere

Re: i know done to death before ...what pads for road use ?

Post by rwilsonrs4 » Tue Feb 19, 2013 12:33 pm

Thanks for the replies guys . I'm thinkin I'll try the yellow stuff pads when the time comes :thumbs:
Phantom black saloon ,PES M112 Supercharged 520ps/595nm K&N filter, 100 cell milltek cats,res valved milltek system. 8 and 10mm H&R spacers.H&R roll bars, "smoke chrome " alloy refurb. JHM Quickshifter, Bilstein B16 coilovers , uprated diff mount ,50/50 devils own WM kit so 1.4 litres/min in intake approx 10% more power and torque
1/4 mile 12.01 secs 123.5mph

iluvmercs
1st Gear
Posts: 93
Joined: Wed Dec 09, 2009 2:38 pm

Re: i know done to death before ...what pads for road use ?

Post by iluvmercs » Wed Feb 20, 2013 3:57 pm

Even though you seem to have made your decision, I thought I would chip in with my thoughts.

Last pad change I went from OEM to Pagid RS4-2s. While I don't know how they would stack up to the potential higher speeds of a Supercharged car, they have been fantastic for fast road and occasional track days.
The price isn't far off dealer prices for OEM either.

Darren

rwilsonrs4
4th Gear
Posts: 533
Joined: Tue May 03, 2011 10:55 am
Location: Scotland somewhere

Re: i know done to death before ...what pads for road use ?

Post by rwilsonrs4 » Thu Feb 21, 2013 9:27 pm

thanks for your input , appreciated :thumbs: , i,ll look into them too , even tho its Supercharged ( at MRC now for mapping ), i dont drive fast :sekret: so that isnt an issue :wink: i,m just looking at options
Phantom black saloon ,PES M112 Supercharged 520ps/595nm K&N filter, 100 cell milltek cats,res valved milltek system. 8 and 10mm H&R spacers.H&R roll bars, "smoke chrome " alloy refurb. JHM Quickshifter, Bilstein B16 coilovers , uprated diff mount ,50/50 devils own WM kit so 1.4 litres/min in intake approx 10% more power and torque
1/4 mile 12.01 secs 123.5mph

Post Reply

Return to “RS4 (B7 Typ 8E) 2006–2008”

Who is online

Users browsing this forum: Google Adsense [Bot] and 120 guests