Wheel spacers rs6 c5

4.2 V8 40v biturbo - 450 bhp
4.2 V8 40v biturbo - 480 bhp (plus)
User avatar
GAZ-MAN
3rd Gear
Posts: 291
Joined: Thu Jun 26, 2008 3:19 pm

Wheel spacers rs6 c5

Post by GAZ-MAN » Mon Jan 07, 2013 10:49 pm

hi all, would a set of 15mm spacers from a rs4 b7 fit on my rs6 lowered on coilovers? thats 15mm each corner, thanks guys

User avatar
pete2144
3rd Gear
Posts: 279
Joined: Tue Oct 09, 2007 5:32 pm
Location: Kent

Re: Wheel spacers rs6 c5

Post by pete2144 » Mon Jan 07, 2013 11:33 pm

Depends on what wheels your running, but the stud pattern is the same..
C6 RS6 Plus MRC 955ps 1220nms

User avatar
GAZ-MAN
3rd Gear
Posts: 291
Joined: Thu Jun 26, 2008 3:19 pm

Re: Wheel spacers rs6 c5

Post by GAZ-MAN » Tue Jan 08, 2013 12:51 am

Hi mate running the standard 19's

User avatar
chunky79
Cruising
Posts: 11517
Joined: Sun Feb 25, 2007 11:51 am
Location: West Mids

Re: Wheel spacers rs6 c5

Post by chunky79 » Tue Jan 08, 2013 7:54 am

Think you may get rubbing issues on full lock but not 100% sure.
previous- Pug 205 gti, 306 gti, 309 gti Goodwood.
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.

Now - Empty garage

If you don't know where you're going, any road will take you there!

User avatar
Shoppinit
Cruising
Posts: 20318
Joined: Wed Dec 31, 2008 6:24 pm

Re: Wheel spacers rs6 c5

Post by Shoppinit » Tue Jan 08, 2013 9:16 am

It would look sh1t. 10mm is good on an RS6.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."

User avatar
mavada
Cruising
Posts: 3270
Joined: Thu Nov 11, 2010 1:19 pm
Location: The Neanderthal land

Re: Wheel spacers rs6 c5

Post by mavada » Tue Jan 08, 2013 11:13 am

GAZ-MAN wrote:hi all, would a set of 15mm spacers from a rs4 b7 fit on my rs6 lowered on coilovers? thats 15mm each corner, thanks guys
...that will be to much, something like this...(although i think these spacers are (slightly) bigger...) it wil rub. you can see the marks on the tyre...
Image
If you can't go to the track, bring the track to you.
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g

User avatar
GAZ-MAN
3rd Gear
Posts: 291
Joined: Thu Jun 26, 2008 3:19 pm

Re: Wheel spacers rs6 c5

Post by GAZ-MAN » Tue Jan 08, 2013 11:50 am

What do you reckon I should go for 10mm each corner? Thanks

User avatar
Shoppinit
Cruising
Posts: 20318
Joined: Wed Dec 31, 2008 6:24 pm

Re: Wheel spacers rs6 c5

Post by Shoppinit » Tue Jan 08, 2013 11:52 am

10 looks good. No issues on mine with 10mm on the fronts.
Daytona RS6 C5 Avant. Viper'd, Billies, Waggers, MTM box brain, C6 stoppers, xcarlink, R8 coolant cap (woohoo)
///M3 E46 | XC90 (V8, natch) | Passat GTE | RR Classic V8 flapper
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair."

User avatar
chunky79
Cruising
Posts: 11517
Joined: Sun Feb 25, 2007 11:51 am
Location: West Mids

Re: Wheel spacers rs6 c5

Post by chunky79 » Tue Jan 08, 2013 8:08 pm

How low is your motor Gazza?
previous- Pug 205 gti, 306 gti, 309 gti Goodwood.
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.

Now - Empty garage

If you don't know where you're going, any road will take you there!

Mr V10
Cruising
Posts: 5344
Joined: Wed Mar 15, 2006 11:38 pm

Re: Wheel spacers rs6 c5

Post by Mr V10 » Tue Jan 08, 2013 9:38 pm

Here's mine when it had 15mm spacers on, they rubbed very slightly so I took them off 8-10mm would be about right.

Image
2009 Audi RS 6 Saloon V10 - 420mm Ceramics, Keyless, Soft Close, Adaptive Cruise, Glass Sunroof, Blinds, Twin Pane & UV, Freeview & DAB, High Beam Assist, MTM bits, Audi Exclusive Bits, MRC, Milltek, GYEF1 ASY2's, Bluetooth streaming music to AMI mod - 753PS, 1021 NM
2016 Audi S3 Saloon S-Tronic, Sepang, B&O, Tech Pack w/connect, 19" 5 Arm Wing Alloys, Comfort Pack, LED Light Pack - Company Car
1995 Audi A8 4.2 V8 quattro Sport

User avatar
mavada
Cruising
Posts: 3270
Joined: Thu Nov 11, 2010 1:19 pm
Location: The Neanderthal land

Re: Wheel spacers rs6 c5

Post by mavada » Tue Jan 08, 2013 10:02 pm

Amar, i remember i pic of your car with these spacers on but taken from the front, you can see it better on that one... :thumbs:
If you can't go to the track, bring the track to you.
Mugello Blue C5 RS6 Avant
Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Yellow Koni's
Porsche 959, gone but not forgotten.
Fight ALS disease https://www.youtube.com/watch?v=wGFDWTC8B8g

swannny
5th Gear
Posts: 1057
Joined: Thu Dec 29, 2011 7:15 pm
Location: cambridge

Re: Wheel spacers rs6 c5

Post by swannny » Tue Jan 08, 2013 10:24 pm

Bugger that looks squat like that.

Really like that look!! Ok, spacers are on my 2013 list as well now!
I used to own a 6, now I'm just a lurker!

User avatar
Virdee Autos
Trader (Expired)
Posts: 2546
Joined: Sun Jun 05, 2005 6:27 pm

Re: Wheel spacers rs6 c5

Post by Virdee Autos » Tue Jan 08, 2013 10:32 pm

Guys we stock the proper H&R stuff with all the common sizes and longer bolts to accompany them. PM for more info.
Virdee Autos ~ 07950-526592

Noggy Blue RS4 - 710N's | Supersprint Exhaust | RS6 Calipers/RS4 Discs | Aero Wipers | B7 rear wiper | Pioneer AVIC-F10BT | Alcantara dash | Alcantara headlining | 15mm spacers | Pentagon Tints/Supaglass | After-run mod | Carbon steering wheel | R8 engine bay caps | Brushed Alu plate plinth |

swannny
5th Gear
Posts: 1057
Joined: Thu Dec 29, 2011 7:15 pm
Location: cambridge

Re: Wheel spacers rs6 c5

Post by swannny » Tue Jan 08, 2013 10:46 pm

Thanks Virdee :thumb:

I'll be in touch soon, would you mind pm a price for a full set with the longer bolts, including the locking ones pretty please!!
I used to own a 6, now I'm just a lurker!

bilko1
Top Gear
Posts: 1872
Joined: Fri Aug 27, 2010 12:13 am
Location: Bournemouth,Dorset, UK

Re: Wheel spacers rs6 c5

Post by bilko1 » Tue Jan 08, 2013 10:48 pm

swannny wrote:Thanks Virdee :thumb:

I'll be in touch soon, would you mind pm a price for a full set with the longer bolts, including the locking ones pretty please!!
Me to please :bigwave:
Avus Avant, RNS-E mk2 with sds and Bluetooth, Milltek, Hotchkis, Bilstein, Forge, ITG, A.C.E, Wagner, FBMFSW, MTM.

Post Reply

Return to “RS6 / RS6 plus (C5 Typ 4B) 2002-2004”

Who is online

Users browsing this forum: No registered users and 135 guests