Pics of wheels on B7

[Nobber]

Have to agree with N11LS_J here and look forward to your input Jules. Too much OEM around these parts for my liking!

[Jules]

Have to agree with N11LS_J here and look forward to your input Jules. Too much OEM around these parts for my liking!

Thanks mate,these are my current 2.
Although doing a b7 is going to be hard as such great looking cars to start with,but theres always subtle touches that can improve things

[Nobber]

Very nice cars man, stunning! I've seen them on ED38 and know Ian Chan from back in the day. The boys got mad skills behind the lens.

I've looked in to the Sportlines and the CH's for mine, getting some wide enough in the right offset is the issue though. They are all quite low ET so to make theem work you'd need some decent width spacers.

[Nobber]

Ooooh:

http://cgi.ebay.co.uk/BBS-CH-R-20-zoll- ... 436wt_1165

[Steve_C]

which one is the seat?

scream.jpg (6.49 KiB) Viewed 1341 times

[Steve_C]

PS - great looking cars, Jules!

[Jules]

Very nice cars man, stunning! I've seen them on ED38 and know Ian Chan from back in the day. The boys got mad skills behind the lens.

I've looked in to the Sportlines and the CH's for mine, getting some wide enough in the right offset is the issue though. They are all quite low ET so to make theem work you'd need some decent width spacers.

The sportlines were just a stop gap,great looking classic wheel just quite popular.
The ch's on the RS are 19 x 9.5 all round,you cant really tell but them have a curved face as they are the bmw fitment ones,so with
using hub adapters it allows you to bring them out more.
They are only et15 on the rears,but just camber in when dropped right down.
This pic shows the curve better

[Jules]

which one is the seat?

scream.jpg

Can i go phone a friend or 50/50

Thanks Steve

[Nobber]

Looks top drawer man, what width are the 5x120 to 5x112 adapters?

[Ollieb7]

I think it is great that there is each to their own - the world would be a very boring place otherwise. I can't however get my head round massively lowered Avants without thinking there must be a family of 12 inside and a massive st.bernard in the boot..

[Jules]

Looks top drawer man, what width are the 5x120 to 5x112 adapters?

Cheers
The bmw Ch's were et 40 and i ran h+r hub adapters with 25 mm on the rear and 20 on the front

[Jules]

I think it is great that there is each to their own - the world would be a very boring place otherwise. I can't however get my head round massively lowered Avants without thinking there must be a family of 12 inside and a massive st.bernard in the boot..

Dont give the secret away,and it was 2 st bernards

But i totally agree,we are not always going to like the same things