The Modified RS4 performance list

[sonny]

Do figures measured elsewhere than on MRC`s dyno count?
Does nitrous count ?

Its any were duud40, not just MRC, its just a simple reflection on what we have had done to the cars, we know that there are variables at play. its just a quick At a glance list as too observe performance figures, hence why I asked where you had the RR/work carried out.

I would not include NOS as its not a true reflection imo

[sonny]

My guess is that 90% of those who wind up posting here will have had the work done at MRC so it'll be a good indication...as long as people are quoting corrected figures.

+1

[rs4mikek]

1) 441ps, Sonny, BMC filter, Full Milltek (non res 200cell cats), Manifold, Remap and valves cleaned, MRC

2) 451.5ps, 484Nm, Sar, itg filter,milltek cat back non res,original oem cats with pre cat removed,manifold,remap,valves cleaned,mrc.

3)445.6ps, 479nm Brooner MRC filter manifold ported valves cleaned custom remap oem exhaust H&R anti roll bars MRC magic

4) 417.4ps, N11LS_J, K&N filter, Custom RS Fabrications system with 3" De-Cat pipes, Paramount Custom map, Hotchkis ARBs and H&R springs.

5) 395.9ps, 461nm, rs4mikek, freelow filter, Full Milltek with 100 cell cats, custom remap, all work done by MRC (manifolds and valve cleaning not done yet)

[RSsJs]

1) 441ps, Sonny, BMC filter, Full Milltek (non res 200cell cats), Manifold, Remap and valves cleaned, MRC

2) 451.5ps, 484Nm, Sar, itg filter,milltek cat back non res,original oem cats with pre cat removed,manifold,remap,valves cleaned,mrc.

3)445.6ps, 479nm Brooner MRC filter manifold ported valves cleaned custom remap oem exhaust H&R anti roll bars MRC magic

4) 417.4ps, N11LS_J, K&N filter, Custom RS Fabrications system with 3" De-Cat pipes, Paramount Custom map, Hotchkis ARBs and H&R springs.

5) 395.9ps, 461nm, rs4mikek, freelow filter, Full Milltek with 100 cell cats, custom remap, all work done by MRC (manifolds and valve cleaning not done yet)

6)442ps, 471Nm, RSsJs, MRC filter, Full Milltek (non res 100cell cats), manifold, remap and valves cleaned, MRC and Sachs performance clutch.

[bluenosewrx]

Anything counts i think,lol

MAC

[rs4mikek]

Looks like i am bottom of the list... lets hope i'll move up the list after my next visit to MRC in November !!!

[Blue_Thunder]

Maybe worth asking Doug to post up a Dyno plot overlaying a few of the cars on here. You'd be able to compare the power curve as well.

You may find that some of the cars (eg: Brooners on stock exhaust) make more power up top, but may not have the same mid-range as some of the others.

Just an idea.

Some impressive figures though. Us B5 drivers may have to start watching our rear-view mirrors more closely! :-p

[JackS4]

1) 441ps, Sonny, BMC filter, Full Milltek (non res 200cell cats), Manifold, Remap and valves cleaned, MRC

2) 451.5ps, 484Nm, Sar, itg filter,milltek cat back non res,original oem cats with pre cat removed,manifold,remap,valves cleaned,mrc.

3)445.6ps, 479nm Brooner MRC filter manifold ported valves cleaned custom remap oem exhaust H&R anti roll bars MRC magic

4) 417.4ps, N11LS_J, K&N filter, Custom RS Fabrications system with 3" De-Cat pipes, Paramount Custom map, Hotchkis ARBs and H&R springs.

5) 395.9ps, 461nm, rs4mikek, freelow filter, Full Milltek with 100 cell cats, custom remap, all work done by MRC (manifolds and valve cleaning not done yet)

6)442ps, 471Nm, RSsJs, MRC filter, Full Milltek (non res 100cell cats), manifold, remap and valves cleaned, MRC and Sachs performance clutch.

7) Unknown as not RR'd, JackS4, Full Milltek (non res 100cell cats), ported manifold, MRC filter, valves cleaned, MRC remap, Sachs performance clutch & flywheel, Bilstein PSS9's and H&R ARB's.

J

[ecain63]

Im interested as to why you guys are working with PS and not BHP? Excuse my ignorance. I'd like to think it wasnt because its a higher figure..........

[sonny]

Im interested as to why you guys are working with PS and not BHP? Excuse my ignorance. I'd like to think it wasnt because its a higher figure..........

The reason I asked PS was purely as most ppl post results in PS and the RR print out that I have seen have been in PS. your welcome to put BHP down as well. I just wanted to make it formal, i.e. the use of one system.

[ecain63]

No worries. Was just curious. lol

[Revolution]

Interesting reading the mods, but only 7 modified cars on this forum surely not.
C'mon all please get your mods up as its good to see whats the fave mods on here....
Glenn

[P_G]

I have lots of mods but none performance wise as I suspect have others.

[PetrolDave]

I have lots of mods but none performance wise as I suspect have others.

+1

[Revolution]

I still think it will make good reading and is still a mod - so keep listing