Lambo 18" alloys with nearly new 225-40-18 tyres. Were fitted to an Audi S4 B5. both the alloys and tyres only covered 800 miles.
couple of the alloys have been kerbed. will post up pic's soon.
open to offers.
brett
lambo 18" alloys with nearly new tyres.
-
BRETTCOLLINS
- 5th Gear
- Posts: 1202
- Joined: Tue Apr 01, 2003 9:50 pm
- Location: Hertfordshire
- Contact:
lambo 18" alloys with nearly new tyres.
MING BLUE AUDI S4
Car is on Lock down
506.9 BHP @ 6.020 RPM
445.0 WHP @ 5.981 RPM
481.5 IBFT @ 4.976 RPM
Car is on Lock down
506.9 BHP @ 6.020 RPM
445.0 WHP @ 5.981 RPM
481.5 IBFT @ 4.976 RPM
-
BRETTCOLLINS
- 5th Gear
- Posts: 1202
- Joined: Tue Apr 01, 2003 9:50 pm
- Location: Hertfordshire
- Contact:
RE: lambo 18" alloys with nearly new tyres.
The make of tyres are what came with them when new Adminal. the PCD on the alloys are 112 and the off set were Custom ET33 so that they would fit an B5 S4 with (B7 RS4 big brakes) without spacers.
The alloys come with a full set of new alloy nuts too.....
The alloys come with a full set of new alloy nuts too.....
MING BLUE AUDI S4
Car is on Lock down
506.9 BHP @ 6.020 RPM
445.0 WHP @ 5.981 RPM
481.5 IBFT @ 4.976 RPM
Car is on Lock down
506.9 BHP @ 6.020 RPM
445.0 WHP @ 5.981 RPM
481.5 IBFT @ 4.976 RPM
RE: lambo 18" alloys with nearly new tyres.
pictures??
Avus B5 RS4, Miltek down pipes/No cats/Miltek Cat-back, Wagner uprated SMIC's, short shifter, B7 brakes, Phaeton brake ducts, H&R ARB's, H&R Coilovers, AWE DTS, MRC custom Remap + water meth injection = BIG GRIN on my face with poo in my passengers pants
**Now with a Carbon roof**
'Build the best and the rest will follow'
**Now with a Carbon roof**
'Build the best and the rest will follow'
-
BRETTCOLLINS
- 5th Gear
- Posts: 1202
- Joined: Tue Apr 01, 2003 9:50 pm
- Location: Hertfordshire
- Contact:
RE: lambo 18" alloys with nearly new tyres.
MING BLUE AUDI S4
Car is on Lock down
506.9 BHP @ 6.020 RPM
445.0 WHP @ 5.981 RPM
481.5 IBFT @ 4.976 RPM
Car is on Lock down
506.9 BHP @ 6.020 RPM
445.0 WHP @ 5.981 RPM
481.5 IBFT @ 4.976 RPM
Who is online
Users browsing this forum: No registered users and 24 guests