Fitting W8 undertray to B5 RS4

[neckarsulm]

..can anyone confirm if this is as simple as refitting the original or if extra work is needed e.g. drilling new holes to align with those in the bumper.
Thanks

[Contigo]

What's wrong with yours? Smashed?

[Virdee Autos]

I think most of it is pretty straight forward, only gripe is the lower intercooler hoses, as you'll see the originaly tray has a recess for these.

Don't think no one has sucessfully fitted one though....

[neckarsulm]

What's wrong with yours? Smashed?

It probably was in the past but I didn't get one with the car.

Don't think no one has sucessfully fitted one though....

I was under the impression MRC fitted these as replacements as a matter of course, anyone?

[drewski]

the holes all line up so no need for drilling. as TradeRS mentioned, the lower i/c hoses will press against the W8 belly pan. a heat gun was used on mine to mold the plastic. i've seen others cut a rectangular hole in the W8 pan to accomodate the i/c hoses.

[neckarsulm]

the holes all line up so no need for drilling. as TradeRS mentioned, the lower i/c hoses will press against the W8 belly pan. a heat gun was used on mine to mold the plastic. i've seen others cut a rectangular hole in the W8 pan to accomodate the i/c hoses.

Superb info drewski thanks! (Especially as I have a heat gun!)

[ogg14]

Anyone know the part number for these belly pans... as mine was badly cracked...

Thanks

Andy

[neckarsulm]

Loads of info this link Andy;

http://www.rs246.com/index.php?name=PNp ... iundertray