Single Mass Flywheel

[AndyC1982]

Hi Everyone,

A few people on this board have mentioned that while my gearbox is out being rebuilt I should have the flywheel checked before putting a new clutch in and I should consider a single mass flywheel, is this sensible? if the OEM fly wheel looks ok should I stick with it? in everyones experience how much does an OEM one cost and how much do the single mass ones cost?

Cheers in advance

Andy

[Siena]

I've just taken delivery of my SM flywheel, custom made for my S8 4,2L V8 motor, that's going into my B5 Af quattro Sport.

Weight is 7,2 kilos, as compared to the OEM 13,5 kilos.
Cost me £220 inclusive.

OEM DM is bloody heavy, and very expensive.

Some pictures:






[/img]

[grizz]

Take a look at ttv racing .

http://www.ttvracing.com/

[okkim]

I would install (and just did couple days ago) a light weight flywheel. Fidanza is quite cheap, and it is good.

[ZKNY]

I've just taken delivery of my SM flywheel, custom made for my S8 4,2L V8 motor, that's going into my B5 Af quattro Sport.

Weight is 7,2 kilos, as compared to the OEM 13,5 kilos.
Cost me £220 inclusive.

OEM DM is bloody heavy, and very expensive.

Some pictures:






[/img]

where is this piece from? 034? how much? and why are you putting a part that is for the V8 in our car? i dont quite understand the logic... how do you kno it will work?

please let me know your source, and thoughts, cheers.

[dummi]

he did a motor swap to a v8, he's using his flywheel as an example of the work...

[imolas4uk]

have you got MASSIVE hands or is that flywheel dead small ??

[ZKNY]

hello? any ideas or leads on where this is from? and/or if it will work? please reply SIENA. cheers! =)

[Blue_Thunder]

hello? any ideas or leads on where this is from? and/or if it will work? please reply SIENA. cheers! =)

You obviously didn't read -

he did a motor swap to a v8, he's using his flywheel as an example of the work...

Siena got it custom made by a firm in the UK. Have you tried PM'ing him?
This particular one wouldn't work on the V6 because it's got 10 holes, not 8. Although they did f**k it up the first time and made him one with 8 holes, so he may be able to get hold of that for you.

[Siena]

hello? any ideas or leads on where this is from? and/or if it will work? please reply SIENA. cheers! =)

Hi, sorry I didn't read your requests till today.

As BT said, it's for an S8 / B5 marriage.
A local firm made it up for me.

I didn't go for the 034 item, as it's aluminium, which I'm not too keen on.
Let me know, if you need one for an S4.

[jimbo1234567]

I would install (and just did couple days ago) a light weight flywheel. Fidanza is quite cheap, and it is good.

okkim did you see any gains with this flywheel fitted? jb

[okkim]

Yes, the car revs easier. But I let the owner tell more

[LOWR1D3R]

I would install (and just did couple days ago) a light weight flywheel. Fidanza is quite cheap, and it is good.

okkim did you see any gains with this flywheel fitted? jb

It was my car that Okkim installed Fidanza + Clutchmasters Stage 4 clutch kit.
I can say that it revs up a lot easier than with oem flywheel. Revs drop faster as well.
Lighter flywheel doesn´t affect negatively in daily driving at any circumstances.
Car feels a lot more fun now, it´s way more crisp.
I give my blessing.

[jimbo1234567]

thats the answer i was wanting to hear