BBS Le Mans & Challenge without spacers?

2.7 V6 30v biturbo - 380 bhp
Post Reply
User avatar
Gumball0r^
Neutral
Posts: 6
Joined: Wed Aug 25, 2004 7:17 pm
Location: Denmark

BBS Le Mans & Challenge without spacers?

Post by Gumball0r^ » Mon Apr 10, 2006 4:22 pm

Hi

I was at my local "wheel-shop" today to look at a new set of rims for my new car. The BBS Le Mans and Challenge looked very (!) nice, especially in 19", but I was told that they only fit with spacers :? Since I havent heard anything bad comments about spacers I would like to now if any of you guys have fitted BBS' without spacers? And your experience with spacers.

Regards, Mads
Top
User avatar
Nige_RS4
Cruising
Posts: 3264
Joined: Tue Feb 25, 2003 2:54 pm
Location: UK
Contact:
Contact Nige_RS4

RE: BBS Le Mans & Challenge without spacers?

Post by Nige_RS4 » Mon Apr 10, 2006 5:00 pm

They probably won't clear your calipers without spacers.
https://www.speedcams.co.uk

B5 2.7t S4 - gone
B5 2.7t RS4 - gone
Ed 30 Golf DSG - gone
A5 3.0tdi - gone within 12 months!
S3 2.0 tfsi - 6+ years, but now sold
2018 Golf R 7.5
Top
VST
2nd Gear
Posts: 248
Joined: Wed Jan 22, 2003 8:08 pm
Location: Ireland

Post by VST » Mon Apr 10, 2006 5:50 pm

you'll need spacers with the LM's certainly.

and I dont think BBS make an ET20 CH so you'll need spacers with those too.

I have a set of 19in BBS LM's for sale in excellent condition if you are interested, see pictures in the gallery.
MTM RS4
Top
User avatar
RED_ROCKET
4th Gear
Posts: 794
Joined: Mon Mar 29, 2004 12:43 am
Location: London (E)

Post by RED_ROCKET » Mon Apr 10, 2006 5:55 pm

I have LM's on mine, without spacers you'll have issues allover. I advise spacers definatley. Check my gallery out.
993 Gt2 - Mid life crisis
RS6 b6 Avant - Black, ceramics..wip (sold)
RS4 b7 Avant - Mugello Blue, ceramics, Exclusive interior (Sold)
Datsun - Cherry turbo, sunroof...going strong..(sold)
RS4 b7 Avant- Sprint Blue, Ceramics, Milltek (sold)
RS4 B5 -(Disappeared)
A1 - Sportline Audi Sport Edition(Sold)
Q7 - Family wagon (RIP)
Top
User avatar
Gumball0r^
Neutral
Posts: 6
Joined: Wed Aug 25, 2004 7:17 pm
Location: Denmark

Post by Gumball0r^ » Mon Apr 10, 2006 6:58 pm

Thanks for the answers.
RED_ROCKET wrote:I have LM's on mine, without spacers you'll have issues allover. I advise spacers definatley. Check my gallery out.
So you haven't had any problems at all with using spacers?
Top
User avatar
Tomson
4th Gear
Posts: 961
Joined: Thu Feb 19, 2004 1:54 pm
Location: Cheltenham

Post by Tomson » Mon Apr 10, 2006 7:07 pm

I have BBS GT-004's (very sim to LM's). I have both 12mm and 15mm spacers. The 12mm's were supplied by BBS as part of the kit to make the rims fit. Although I have Movits and things were just a bit to close for comfort so got some 15mm spacers machined locally.

No problems with spacers what-so-ever.

However, we are talking CNC machined spacers mm perfect and mated to both wheel and hub - not halfords specials...
Top
User avatar
stevett
1st Gear
Posts: 68
Joined: Fri Mar 17, 2006 9:57 pm

Post by stevett » Tue Apr 11, 2006 11:22 am

i have bbs challenge wheels with no spacers!
Image
Image
MRC AUDI TT 415BHP/398FTLBS
0-60 4.1SECS,1/4MILE 12.4SECS
Top
VST
2nd Gear
Posts: 248
Joined: Wed Jan 22, 2003 8:08 pm
Location: Ireland

Post by VST » Tue Apr 11, 2006 1:12 pm

Yes you have......on a TT.

I think Gumball0r has a B5 RS4 seeing as how he posted in the RS4 section? :D
MTM RS4
Top
User avatar
RED_ROCKET
4th Gear
Posts: 794
Joined: Mon Mar 29, 2004 12:43 am
Location: London (E)

Post by RED_ROCKET » Tue Apr 11, 2006 2:46 pm

No problems so far, apart from curbing them!!!
993 Gt2 - Mid life crisis
RS6 b6 Avant - Black, ceramics..wip (sold)
RS4 b7 Avant - Mugello Blue, ceramics, Exclusive interior (Sold)
Datsun - Cherry turbo, sunroof...going strong..(sold)
RS4 b7 Avant- Sprint Blue, Ceramics, Milltek (sold)
RS4 B5 -(Disappeared)
A1 - Sportline Audi Sport Edition(Sold)
Q7 - Family wagon (RIP)
Top
User avatar
S4power
Neutral
Posts: 46
Joined: Tue Apr 06, 2004 10:07 pm
Location: Stockholm/Sweden
Contact:
Contact S4power

Post by S4power » Tue Apr 11, 2006 5:58 pm

I fitted mine BBS LeMans (9.5X19") at first with out the spacers, and it works. (I have the original brakes) Then I tried the 12mm spacers that are recommended and the car seemed to handle better and wasn’t so nervous as before. So now I always drive with the spacers on with out any problems at all.

Go for it, buy the BBS LeMans! :)
Thomas / RS4 Sport By quattro GmbH / S3-08 / RS4 Limo By TECS
Top
User avatar
stevett
1st Gear
Posts: 68
Joined: Fri Mar 17, 2006 9:57 pm

Post by stevett » Tue Apr 11, 2006 11:42 pm

VST wrote:Yes you have......on a TT.

I think Gumball0r has a B5 RS4 seeing as how he posted in the RS4 section? :D
smart arse! sorry am i not allowed on here! is there really that much difference in the fitting?
MRC AUDI TT 415BHP/398FTLBS
0-60 4.1SECS,1/4MILE 12.4SECS
Top
User avatar
DaveP
Top Gear
Posts: 1533
Joined: Wed Dec 03, 2003 11:29 pm
Location: North West England

Post by DaveP » Wed Apr 12, 2006 8:15 am

I don't think Tom was being a smart arse, and yes, the fitting is quite different - even the fitting from an S4 to an RS4 is different.
DaveP...
Audi Allroad - Daily slogger
S1 Exige - Track beast
Top
User avatar
stevett
1st Gear
Posts: 68
Joined: Fri Mar 17, 2006 9:57 pm

Post by stevett » Wed Apr 12, 2006 12:32 pm

DaveP wrote:I don't think Tom was being a smart arse, and yes, the fitting is quite different - even the fitting from an S4 to an RS4 is different.
lol rs boys stick together! was just trying to add some input to the thread!
MRC AUDI TT 415BHP/398FTLBS
0-60 4.1SECS,1/4MILE 12.4SECS
Top
User avatar
DaveP
Top Gear
Posts: 1533
Joined: Wed Dec 03, 2003 11:29 pm
Location: North West England

Post by DaveP » Wed Apr 12, 2006 12:38 pm

Hehe....actually I don't own an RS anymore...
DaveP...
Audi Allroad - Daily slogger
S1 Exige - Track beast
Top
User avatar
stevett
1st Gear
Posts: 68
Joined: Fri Mar 17, 2006 9:57 pm

Post by stevett » Thu Apr 13, 2006 10:12 am

DaveP wrote:Hehe....actually I don't own an RS anymore...
fair enough :lol:
MRC AUDI TT 415BHP/398FTLBS
0-60 4.1SECS,1/4MILE 12.4SECS
Top
Post Reply

Return to “RS4 (B5 Typ 8D) 1999-2001”

Who is online

Users browsing this forum: No registered users and 43 guests