RS246.com Forum :: The World's #1 Audi R, S and RS Enthusiast Community

C7 with Akrapovic Exhaust system.
Currently have a stage 1 MTM Tune.

Anyone have ideas on where to get decent downpipes to fit this?

Also- Pro's vs Cons?

Cheers

Sent from my SM-G955F using Tapatalk

You could try speaking to Akrapovic and see if they will make you a set?


Sent from my iPhone using Tapatalk

rtd wrote:You could try speaking to Akrapovic and see if they will make you a set?


Sent from my iPhone using Tapatalk

Tried that, they don't get involved.

Sent from my SM-G955F using Tapatalk

Try Fourie Fabrications they are based in Banbury or Demand Engineering.


Sent from my iPhone using Tapatalk

Why not use Milltek DP's?

DXB_RS6 wrote: ↑

Sun Oct 15, 2017 5:45 pm

C7 with Akrapovic Exhaust system.
Currently have a stage 1 MTM Tune.

Anyone have ideas on where to get decent downpipes to fit this?

Also- Pro's vs Cons?

Cheers

Sent from my SM-G955F using Tapatalk

How mtm piggyback performance good?

Why you didn't chosen Miltek catback? That would solve your problems, you could just get Miltek downpipes and that's all.

Milltek the solution to all life's problems


Sent from my iPhone using Tapatalk

Tadass910 wrote:

DXB_RS6 wrote: ↑

Sun Oct 15, 2017 5:45 pm

C7 with Akrapovic Exhaust system.
Currently have a stage 1 MTM Tune.

Anyone have ideas on where to get decent downpipes to fit this?

Also- Pro's vs Cons?

Cheers

Sent from my SM-G955F using Tapatalk

How mtm piggyback performance good?

Why you didn't chosen Miltek catback? That would solve your problems, you could just get Miltek downpipes and that's all.

Sorry, I made a typo. The tune was done by MRC.

Its good. Much better than stock. Not perfect tbh in terms of smoothness etc, sometimes it can get confused unlike the stock one.

Its much sharper and more responsive. Much quicker, so quick it broke my prop shaft within a week.

Went for the Akrapovic because of the sound. It's just right for me. It's a matter of taste u guess. Milltek sounded to loud and boy racer. Akrapovic sounds more tuned, a little like a masarati, not as deep as stock, more refined.

Sent from my SM-G955F using Tapatalk

rtd wrote: ↑

Sun Oct 15, 2017 6:55 pm

You could try speaking to Akrapovic and see if they will make you a set?


Sent from my iPhone using Tapatalk

Yeah if they did then probably charge you 7k!

RS6chris! wrote:

rtd wrote: ↑

Sun Oct 15, 2017 6:55 pm

You could try speaking to Akrapovic and see if they will make you a set?


Sent from my iPhone using Tapatalk

Yeah if they did then probably charge you 7k!

And if it was for an S it would be £6,999.99 - RS tax!


Sent from my iPhone using Tapatalk

DXB_RS6 wrote:so quick it broke my prop shaft within a week.

Is there an uprated one to handle the torque?



Sent from my iPhone using Tapatalk

It was custom so he will modify it.

Also have a problem with the revs sticking. Meaning, when I rev the car, the revs won't come down as fast as it should. Takes a few seconds to reach back to 0. Happens very randomly but annoying.

They need to fox this also.

Sent from my SM-G955F using Tapatalk

Contact Stan at Ecotune,he is just outside Glasgow and owns an RS6 with an Akrapovic check with him what downpipes he is running,not sure if he has swapped his out or not,worth asking the question though


Sent from my iPhone using Tapatalk

Litchfield? They offered them to me when I had the RS6 with the Akra, £1400 a side though

These prices seem mental - can't a good exhaust fabricator custom make some?


Sent from my iPhone using Tapatalk