Akrapovic Vs Milltek exhaust...

4.0 V8 40v biturbo TFSI - 553 bhp
4.0 V8 40v biturbo TFSI - 597 bhp (Performance)
User avatar
Dallas83
2nd Gear
Posts: 184
Joined: Fri Mar 27, 2015 1:28 pm

Re: Akrapovic Vs Milltek exhaust...

Post by Dallas83 » Fri Feb 05, 2016 8:42 pm

Yup, main and secondary are still there as I didn't want to have issues with the ecu freaking out, plus, there is nowhere around here for a good remap so didn't want to be driving around with warning lights on the dash...
Current Cars:

- B7 RS4 (Imola Yellow) - SOLD

- 2013' BMW X5 (White) - NEARLY SOLD

- 2016 RS6 C7 (Exclusive Paint: Porsche Voodoo Blue) - NEARLY HERE

User avatar
Paulm
Top Gear
Posts: 1661
Joined: Tue Jan 06, 2004 12:23 pm
Location: Aberdeenshire

Re: Akrapovic Vs Milltek exhaust...

Post by Paulm » Fri Feb 05, 2016 10:43 pm

Dallas83 wrote:*UPDATE*

Ok so i don't have a video up yet as i've only had the install done , but what i can say is what a bloody difference !

i removed the downpipes and added LEO's miltek downpipes which deletes a set of 3rd cats. From there we did a custom straight pipe and removed the centre res box and ran them all the way to the back box. The sound is absolute unreal !!! The bangs and pops are 100x louder than the original stock setup for the sports exhaust , but the note is just amazing.

If your looking for a cheap way to get more out of the sports exhaust system that you already have then i would definitely recommend going down the route of doing this.

I'll get some proper videos with Martay and the Gopro tomorrow...

The front pipes you fitted removed the secondary cats leaving the primary. The down pipes contain the primary cats right up beside the turbos with pre and post Lamdas. The RS only has 2 sets of cats.

Where do you live? No-one able to map it?
BMW 540i
2018 GTR
F90 M5
X3MC
RS3 Saloon
RS7 FL best car I've owned. No faith in turbo oil screen (turbos failing) or sticking oil scraper ring causing missfires.
F10 M5 LCI still no rear grip lol
S7 black Edition Too big and heavy
S3 8V FL DSG 310ps, road noise is a joke
RS3 8P Rubbish
C7 RS6 Fantastic car but missed playing
GTR R35 800bhp, too extreme, crazy fast though
911 Turbo Remapped. Hated it
F10 M5, awesome but no rear grip
RS6 V10 700BHP crazy
Porsche Cayenne Turbo S 600bhp

footsoldier
1st Gear
Posts: 65
Joined: Thu Apr 09, 2009 9:31 pm

Re: Akrapovic Vs Milltek exhaust...

Post by footsoldier » Sat Feb 06, 2016 1:46 pm

I take it the Akra can be fitted by any decent garage even if no previous experience?
Also, the price seems fixed at all outlets, does anyone discount? It all helps!

Thanks

RS6chris!
Cruising
Posts: 3845
Joined: Sun Oct 25, 2009 8:55 pm
Location: North East(Teesside).

Re: Akrapovic Vs Milltek exhaust...

Post by RS6chris! » Tue Feb 09, 2016 3:54 pm

Panamera Turbo S e hybrid (again)
RS6 C8 carbon black(merlin)
Panamera Turbo S e hybrid
RS6 C8 launch edition
R8 V10 plus
C7 RS6 PE dynamic pack plus
C7 RS6
Porsche Panamera Turbo
C6 RS6 AVANT
RS4 B7
Golf R32 mk 5
BMW M3 E46
Golf R32 mk 5
Golf GTI mk 5
VW Passat 130d 4 motion
VW bora 150pd
Ford Mondeo Ghia X V6
Ford Focus zetec
Rover 214!!

Andy_W
2nd Gear
Posts: 167
Joined: Thu Jan 07, 2016 4:42 pm

Re: Akrapovic Vs Milltek exhaust...

Post by Andy_W » Tue Feb 09, 2016 7:42 pm

Seems Akra are working hard to team up with manufacturers. If they are the same price and no warranty risk a good option.

prestigewheelcentre
Trader (Expired)
Posts: 288
Joined: Mon Sep 01, 2014 7:22 pm
Location: Birmingham
Contact:

Re: Akrapovic Vs Milltek exhaust...

Post by prestigewheelcentre » Tue Feb 09, 2016 11:14 pm

footsoldier wrote:I take it the Akra can be fitted by any decent garage even if no previous experience?
Also, the price seems fixed at all outlets, does anyone discount? It all helps!

Thanks
Give us a shout. Maybe we can help you? Better to have some one with experience do the install...usually they are straight forward but we have had one in and valves were not opening correctly, however we were able to solve it.
Vossen Wheels | HRE Wheels | ADV.1 Wheels | Forgeline | Miltek | iPE Exhausts | Akrapovic






www.PrestigeWheelCentre.co.uk

Facebook Page | Instagram Page | Gallery Images

prestigewheelcentre
Trader (Expired)
Posts: 288
Joined: Mon Sep 01, 2014 7:22 pm
Location: Birmingham
Contact:

Re: Akrapovic Vs Milltek exhaust...

Post by prestigewheelcentre » Tue Feb 09, 2016 11:16 pm

Andy_W wrote:Seems Akra are working hard to team up with manufacturers. If they are the same price and no warranty risk a good option.
We visited the Akra factory in Slovenia and were very surprised to see exactly how many manufacturers they dealt with. So much so we were not allowed to take pictures. :thumbsdown:

They were involved with formula 1 at some point.
Vossen Wheels | HRE Wheels | ADV.1 Wheels | Forgeline | Miltek | iPE Exhausts | Akrapovic






www.PrestigeWheelCentre.co.uk

Facebook Page | Instagram Page | Gallery Images

footsoldier
1st Gear
Posts: 65
Joined: Thu Apr 09, 2009 9:31 pm

Re: Akrapovic Vs Milltek exhaust...

Post by footsoldier » Wed Feb 10, 2016 12:18 am

prestigewheelcentre wrote:
footsoldier wrote:I take it the Akra can be fitted by any decent garage even if no previous experience?
Also, the price seems fixed at all outlets, does anyone discount? It all helps!

Thanks
Give us a shout. Maybe we can help you? Better to have some one with experience do the install...usually they are straight forward but we have had one in and valves were not opening correctly, however we were able to solve it.
Ok - who do I ask for? I'm in Edinburgh which doesn't make finding an experienced installer straightforward!

NLM13
Neutral
Posts: 20
Joined: Fri Nov 28, 2014 2:53 pm

Re: Akrapovic Vs Milltek exhaust...

Post by NLM13 » Wed Feb 10, 2016 10:38 am


I went to look at Nardo RS6 in Perth Audi a few months ago that had an Akrapovic fitted that had that Audi Sport branding on it. Apparently it had been the Head of Audi UK's company car and it was fitted specially for him. It sounded amazing, but don't think I can justify the cost just now!

prestigewheelcentre
Trader (Expired)
Posts: 288
Joined: Mon Sep 01, 2014 7:22 pm
Location: Birmingham
Contact:

Re: Akrapovic Vs Milltek exhaust...

Post by prestigewheelcentre » Wed Feb 10, 2016 12:08 pm

footsoldier wrote:
prestigewheelcentre wrote:
footsoldier wrote:I take it the Akra can be fitted by any decent garage even if no previous experience?
Also, the price seems fixed at all outlets, does anyone discount? It all helps!

Thanks
Give us a shout. Maybe we can help you? Better to have some one with experience do the install...usually they are straight forward but we have had one in and valves were not opening correctly, however we were able to solve it.
Ok - who do I ask for? I'm in Edinburgh which doesn't make finding an experienced installer straightforward!
I see now that logistically its not practical. To be completely fair to you I would recommend getting in touch with Glenn at Revolution. They are Akra dealers and Im sure he will take care of you. 0191 461 9200. They are good guys there and I personally trust them.

I'd love to be able to help you out but Im sure you would not want to drive all the way to B-Ham for the install. If you do need any advise then your welcome to call me on 0121 377 8866 and ask for Del.
Vossen Wheels | HRE Wheels | ADV.1 Wheels | Forgeline | Miltek | iPE Exhausts | Akrapovic






www.PrestigeWheelCentre.co.uk

Facebook Page | Instagram Page | Gallery Images

User avatar
Revolution
Trader (Expired)
Posts: 2647
Joined: Mon Nov 02, 2009 3:06 pm
Contact:

Re: Akrapovic Vs Milltek exhaust...

Post by Revolution » Wed Feb 10, 2016 12:36 pm

Thanks for the recommendation Del, much appreciated.

Footsoldier - I have sent you a pm so feel free to email or pm me back if you want prices on the Akra for your car, as Del said we all visited the factory in Slovenia last year and were blown away by the levels of research and development they were doing. Very impressive indeed.

Little Glen
http://www.revolution247.com

2016 RS3
2018 VW Tiguan
2010 Smart fourtwo

Sold but never forgotten:
2014 RS4 Sepang Blue
2015 VW Golf-R
1995 Subaru Impreza Series McRae
2012 RS3 Sepang Blue
RS4 B7 Avant Daytona
2002 Renault Avantime V6
2006 2-door Impreza STi
2009 TT TDi Quattro
10 Subaru's inc 22B type UK
Renault Clio V6 MK2
Civic Type-R's Mk1, 2 and 3
Renault Spider, Lotus Exige MK1
Renault Clio 197, Renault Clio Williams MK1
205 GTi 1.6 & 1.9 Gutmann

footsoldier
1st Gear
Posts: 65
Joined: Thu Apr 09, 2009 9:31 pm

Re: Akrapovic Vs Milltek exhaust...

Post by footsoldier » Wed Feb 10, 2016 3:51 pm

prestigewheelcentre wrote:
I see now that logistically its not practical. To be completely fair to you I would recommend getting in touch with Glenn at Revolution. They are Akra dealers and Im sure he will take care of you. 0191 461 9200. They are good guys there and I personally trust them.

I'd love to be able to help you out but Im sure you would not want to drive all the way to B-Ham for the install. If you do need any advise then your welcome to call me on 0121 377 8866 and ask for Del.
Thanks very much for your honest approach. I'll definitely remember it if I'm looking to buy wheels at some point.
Glenn and I have made contact, and my car will be sounding better soon!

Andy_W
2nd Gear
Posts: 167
Joined: Thu Jan 07, 2016 4:42 pm

Re: Akrapovic Vs Milltek exhaust...

Post by Andy_W » Wed Feb 10, 2016 5:05 pm

Jealous!!
It's on my list so be good to hear your thoughts mate.

footsoldier
1st Gear
Posts: 65
Joined: Thu Apr 09, 2009 9:31 pm

Re: Akrapovic Vs Milltek exhaust...

Post by footsoldier » Wed Feb 10, 2016 10:15 pm

Andy_W wrote:Jealous!!
It's on my list so be good to hear your thoughts mate.
No problem - will update once it's on

User avatar
anth8910
4th Gear
Posts: 531
Joined: Sat Feb 25, 2012 10:07 am

Re: Akrapovic Vs Milltek exhaust...

Post by anth8910 » Thu Feb 11, 2016 7:56 pm

footsoldier wrote:
prestigewheelcentre wrote:
I see now that logistically its not practical. To be completely fair to you I would recommend getting in touch with Glenn at Revolution. They are Akra dealers and Im sure he will take care of you. 0191 461 9200. They are good guys there and I personally trust them.

I'd love to be able to help you out but Im sure you would not want to drive all the way to B-Ham for the install. If you do need any advise then your welcome to call me on 0121 377 8866 and ask for Del.
Thanks very much for your honest approach. I'll definitely remember it if I'm looking to buy wheels at some point.
Glenn and I have made contact, and my car will be sounding better soon!
I take you are talking about revolution in Newcastle?

Post Reply

Return to “RS6 (C7 Typ 4G) 2013-2018”

Who is online

Users browsing this forum: No registered users and 72 guests