RS6 Approved Used

4.0 V8 40v biturbo TFSI - 553 bhp
4.0 V8 40v biturbo TFSI - 597 bhp (Performance)
User avatar
chunky79
Cruising
Posts: 11517
Joined: Sun Feb 25, 2007 11:51 am
Location: West Mids

Re: RS6 Approved Used

Post by chunky79 » Fri Apr 14, 2017 8:03 pm

You shouldn't really use impact gums on alloy wheels anyway. Using them on locking nuts is extremely amature.
previous- Pug 205 gti, 306 gti, 309 gti Goodwood.
Audi S3, S4 V8 avant.
Porsche Macan Turbo.
Gone but NEVER forgotten - C5 RS6 Misano red avant.

Now - Empty garage

If you don't know where you're going, any road will take you there!

Markp
5th Gear
Posts: 1119
Joined: Sun Sep 13, 2015 10:47 pm

Re: RS6 Approved Used

Post by Markp » Sat Apr 15, 2017 6:47 am

Rs6ixer wrote:
Fri Apr 14, 2017 11:31 am
Surely if you are buying an a Main dealer youy wouldn't expect to have paint which has road rash all on one side and paint drips from a poor paint job, its more suited in an auction than a main dealer...

Thanks
I agree re drip and wheels but if the stone chips were on the leading edge of he rear wing behind the passenger door ten that is normal for a RS6 of that mileage. They should have a protective film there in my opinion - mine has chips both sides as I drive a lot on narrow lanes and the front wheels pick up roadside debris on left and right.

Rs6ixer
1st Gear
Posts: 62
Joined: Sun Dec 22, 2013 11:59 pm

Re: RS6 Approved Used

Post by Rs6ixer » Sat Apr 15, 2017 10:21 pm

Stonechip were scattered along one side of the car (not shown on their pics) with paint fading on the parts of the vehicle where filler had been applied, ie sills etc

User avatar
Ian_C
Cruising
Posts: 6677
Joined: Fri May 07, 2004 10:11 pm
Location: Bedford

Re: RS6 Approved Used

Post by Ian_C » Sat Apr 15, 2017 11:30 pm

Kind of par for the course for a three year old, end of lease, poverty spec, ex sales rep A3 at an industrial estate car supermarket..... but not a 60k RS6 from a main Audi dealer!!!
B5 B6 B7 B9

E14STO
4th Gear
Posts: 598
Joined: Tue Apr 16, 2013 3:53 pm

Re: RS6 Approved Used

Post by E14STO » Sun Apr 16, 2017 3:19 pm

When I saw this I thought it was a bargain FL. I'd not throw that money at a car with those cosmetic issues. Who sells a car with kerbed and buckled wheels! Crazy. Back street dealer would put it on the forecourt in better knick!

I guess it's only "cosmetic" but gives a sense of how it's been looked after.

Also - mine does have the ppf on the rear quarter arch. Is this not std?
Current -
R8 V10 Plus
Previous -
C7 RS6 Merlin, JBS stg3
997 Gen2 PDK Turbo
Nissan GTR (JM900R)
B7 RS4 TTS, Sepang, black optics, ceramics, miltek, cold air feed etc etc / leon Cupra
, B5 RS4(avus), 996 GT2, B5 RS4 (Misano), TVR Cerbera 4.5, Evo VII RS Sprint
Nissan GTI-R, Uno Turbo ie

Post Reply

Return to “RS6 (C7 Typ 4G) 2013-2018”

Who is online

Users browsing this forum: No registered users and 56 guests