The Mapping coin

[Toffeebananas]

My warranty runs out in a few weeks. Renew warranty or remap? Hmmm

Mike,

You know you wanna remap.

I have spare fuel pumps for you too when they arrive from US (dont ask), exactly the same as what MRC supply i just tried to get cheaper and failed.

will be available anyhow

Did I hear there was a cheap fuel pump going?

[uplandsway]

My warranty runs out in a few weeks. Renew warranty or remap? Hmmm

Mike,

You know you wanna remap.

I have spare fuel pumps for you too when they arrive from US (dont ask), exactly the same as what MRC supply i just tried to get cheaper and failed.

will be available anyhow

Did I hear there was a cheap fuel pump going?

I will have spare fuel pumps x 2 when they arrive, same as MRC and alike supply.

Genuine reason for sale:- I bought cheaper elsewhere, they now stuck in customs and they aint gonna be there for my stage 2 tune, had to get MRC to pull me out the <beep> and they have supplied

Cant say for sure when they are gonna be available but they are shipped and on way..days, weeks or poss a month.

First come first served. they are circa £400 retail each, you obviously require 2.

That the pumps anyhow https://autotech.com/mm5/merchant.mvc?S ... 0-127-101K

[uplandsway]

So did this at the weekend, currently APR stage 1 with their catted Downpipes mated to OE sports exhaust with resonators and muffler removed plus Piper Ross filter. I haven’t messed with plugs, pumps or injectors.

I’ve had this set up on the car for just over 8 months but never tested what difference there was after having just the ECU file. With the file only it was 680bhp and 1025NM.

Now 722bhp and 1104NM / 815ft lbs.




Sent from my iPad using Tapatalk

You must be located pretty close to me as thats just through the tunnel from my end, performance centre in Sunderland is good for dyno and the lads are sound https://www.performance-centre.co.uk/

Nice RS7 too

[gsc]

So did this at the weekend, currently APR stage 1 with their catted Downpipes mated to OE sports exhaust with resonators and muffler removed plus Piper Ross filter. I haven’t messed with plugs, pumps or injectors.

I’ve had this set up on the car for just over 8 months but never tested what difference there was after having just the ECU file. With the file only it was 680bhp and 1025NM.

Now 722bhp and 1104NM / 815ft lbs.




Sent from my iPad using Tapatalk

You must be located pretty close to me as thats just through the tunnel from my end, performance centre in Sunderland is good for dyno and the lads are sound https://www.performance-centre.co.uk/

Nice RS7 too

Performance Centre is where I got the initial stage 1 ECU file figures measured but it is in the land of the unwashed and JM Imports is just up the road from me.

Sent from my ONEPLUS A6013 using Tapatalk

[uplandsway]

So did this at the weekend, currently APR stage 1 with their catted Downpipes mated to OE sports exhaust with resonators and muffler removed plus Piper Ross filter. I haven’t messed with plugs, pumps or injectors.

I’ve had this set up on the car for just over 8 months but never tested what difference there was after having just the ECU file. With the file only it was 680bhp and 1025NM.

Now 722bhp and 1104NM / 815ft lbs.




Sent from my iPad using Tapatalk

You must be located pretty close to me as thats just through the tunnel from my end, performance centre in Sunderland is good for dyno and the lads are sound https://www.performance-centre.co.uk/

Nice RS7 too

Performance Centre is where I got the initial stage 1 ECU file figures measured but it is in the land of the unwashed and JM Imports is just up the road from me.

Sent from my ONEPLUS A6013 using Tapatalk

I feel your pain.

[uplandsway]

My warranty runs out in a few weeks. Renew warranty or remap? Hmmm

Mike,

You know you wanna remap.

I have spare fuel pumps for you too when they arrive from US (dont ask), exactly the same as what MRC supply i just tried to get cheaper and failed.

will be available anyhow

Did I hear there was a cheap fuel pump going?

There WAS, now SOLD

[Anth]

So did this at the weekend, currently APR stage 1 with their catted Downpipes mated to OE sports exhaust with resonators and muffler removed plus Piper Ross filter. I haven’t messed with plugs, pumps or injectors.

I’ve had this set up on the car for just over 8 months but never tested what difference there was after having just the ECU file. With the file only it was 680bhp and 1025NM.

Now 722bhp and 1104NM / 815ft lbs.



Sent from my iPad using Tapatalk

H
You must be located pretty close to me as thats just through the tunnel from my end, performance centre in Sunderland is good for dyno and the lads are sound https://www.performance-centre.co.uk/

Nice RS7 too

Performance Centre is where I got the initial stage 1 ECU file figures measured but it is in the land of the unwashed and JM Imports is just up the road from me,

Sent from my ONEPLUS A6013 using Tapatalk

Performance center Seem a good outfit, I need a little more province for the RS6 for me personally maybe more just piece of mind rather than anything else. I will however take it over for a Dyno run and maybe for them to get a new airbox in like mikes, thing looks incredible . Airbox envy Mike

gsc, the 7 is looking great . And great figures she sounds a weapon! Are you seeming most of your torque gain mid range? Could you post your print out if possible gsc from the RR by any chance?

Spoke to DMS today, as with Others have said with there chosen mapper, I have used them twice now and had a good service with quality results so I'm just setting it up for the map hopefully within the next few weeks.

I'm also hearing that taking the ECU out and plugging in on the pins to code is a lot better with seeing the maps on plug in initially rather than straight in to the OBD, obvisiouly this is won't stand up if they start looking in to data as we know but I'll see what exactly what the diffrence is later when I've spoke to the techs .

[uplandsway]

You must be located pretty close to me as thats just through the tunnel from my end, performance centre in Sunderland is good for dyno and the lads are sound https://www.performance-centre.co.uk/

Nice RS7 too

Performance Centre is where I got the initial stage 1 ECU file figures measured but it is in the land of the unwashed and JM Imports is just up the road from me.

Sent from my ONEPLUS A6013 using Tapatalk

Performance center Seem a good outfit, I need a little more province for the RS6 for me personally .

gsc, the 7 is looking great . And great figures she sounds a weapon! Are you seeming most of your tourqe gain mid range? Could you post your print out if possible gsc from the RR by any chance?

Spoke to DMS today, as with Others have said with there chosen mapper, I have used them twice now and had a good service with quality results so I'm just setting it up for the map hopefully within the next few weeks. I'm also hearing that taking the ECU out and plugging in on the pins to code is a lot better go seeing the maps on plug in initially rather than straight in to the OBD, obvisiouly this is won't stand up if they start looking in to data as we know but I'll see what exactly what the diffrence is later when I've spoke to the techs .

Performance Centre for Dyno runs

[Daveperc]

Will be interesting to see the printouts.

Just an observation having stood and watched Doug on the MRC Dyno - he always does several runs and tweaks various of the variables in the map to get the best curve etc as he does so. I guess many of the map first, dyno later, suppliers don't do this fine tuning.

Personally I like the fact that the map is done to suit me and my car.

[gsc]

Print out as requested, decent curvature. Figures based on 15% drivetrain loses

Sent from my ONEPLUS A6013 using Tapatalk

[gsc]

Will be interesting to see the printouts.

Just an observation having stood and watched Doug on the MRC Dyno - he always does several runs and tweaks various of the variables in the map to get the best curve etc as he does so. I guess many of the map first, dyno later, suppliers don't do this fine tuning.

Personally I like the fact that the map is done to suit me and my car.

Thing is Dave, on stage 1 I doubt the gains you'd get from custom tuning over standard / generic are worth the time or effort, definitely won't feel them. Stage 2+ I can understand

Sent from my ONEPLUS A6013 using Tapatalk

[Anth]

Will be interesting to see the printouts.

Just an observation having stood and watched Doug on the MRC Dyno - he always does several runs and tweaks various of the variables in the map to get the best curve etc as he does so. I guess many of the map first, dyno later, suppliers don't do this fine tuning.

Personally I like the fact that the map is done to suit me and my car.

Thing is Dave, on stage 1 I doubt the gains you'd get from custom tuning over standard / generic are worth the time or effort, definitely won't feel them. Stage 2+ I can understand

Sent from my ONEPLUS A6013 using Tapatalk

I've been told that a number of times . Maybe squeeze a few HP extra but unnoticeable, the bespoke tune will still have athe base map just adjusted slightly, it's not some specific map just for that individual car from scratch .

[uplandsway]

H
You must be located pretty close to me as thats just through the tunnel from my end, performance centre in Sunderland is good for dyno and the lads are sound https://www.performance-centre.co.uk/

Nice RS7 too

Performance Centre is where I got the initial stage 1 ECU file figures measured but it is in the land of the unwashed and JM Imports is just up the road from me,

Sent from my ONEPLUS A6013 using Tapatalk

Performance center Seem a good outfit, I need a little more province for the RS6 for me personally maybe more just piece of mind rather than anything else. I will however take it over for a Dyno run and maybe for them to get a new airbox in like mikes, thing looks incredible . Airbox envy Mike

gsc, the 7 is looking great . And great figures she sounds a weapon! Are you seeming most of your torque gain mid range? Could you post your print out if possible gsc from the RR by any chance?

Spoke to DMS today, as with Others have said with there chosen mapper, I have used them twice now and had a good service with quality results so I'm just setting it up for the map hopefully within the next few weeks.

I'm also hearing that taking the ECU out and plugging in on the pins to code is a lot better with seeing the maps on plug in initially rather than straight in to the OBD, obvisiouly this is won't stand up if they start looking in to data as we know but I'll see what exactly what the diffrence is later when I've spoke to the techs .

Have messaged you fella.

[Anth]

Evening all,

Ok RS6 is with DMS tomorrow for stage 1, I'm also doing the Sparks to uprated , although I don't think it has to be done more I ordered them and they need using !

Car is being taken to 720bhp and aprox. 950nM flywheel . So huge really in the world of performance gains for the RS6 I didn't come close on the 911.

Once complete I will do a full review, I have chosen DMS as they have been around for many many years, I have used them before, and the sheer amount of prestige vehicles they deal with on a daily basis, I belive there RS maps will be of quality I do have some stats I've been sent over from Santa Pod with the same software used from DMS , the times are impressive to say the least. I'll post shortly with them .

[Anth]

DMS Tuned RS6 C7