Page 1 of 1

Revolution Carbon Intake and Some other bits

Posted: Sun Jan 28, 2018 10:23 pm
by PritJutla
Hi All

Selling my Revolution Carbon Intake
Went back to the standard setup over two years ago and this has been sitting in my garage ever since. Did approx 5k miles on the car. Kit is in good condition

This kit retails at £599 new, asking £375 deliveredSOLD
IMG-20180128-WA0007.jpg

Also have Dectane Smoked Rear Light model RA16LRS for B7 Avant
Bought these a while ago, never fitted these to the car, one of the lights have a fault. Not sure which one, might be an easy fix for someone.
Lights could do with a polish.
They are avant fitment, not sure if they'll fit saloon or cab
offers around £110 delivered
IMG-20180128-WA0013.jpg
IMG-20180128-WA0014.jpg

Also have a drivers door window switch £10+pp

Thanks for looking
Prit

Re: Revolution Carbon Intake and Some other bits

Posted: Sun Jan 28, 2018 11:14 pm
by dhali
What's the fault on the light ?

Re: Revolution Carbon Intake and Some other bits

Posted: Wed Jan 31, 2018 10:00 pm
by Stew
You have a pm 👍

Re: Revolution Carbon Intake and Some other bits

Posted: Wed Jan 31, 2018 10:38 pm
by ilsondanni
PritJutla wrote:
Sun Jan 28, 2018 10:23 pm
Hi All

Selling my Revolution Carbon Intake
Went back to the standard setup over two years ago and this has been sitting in my garage ever since. Did approx 5k miles on the car. Kit is in good condition

This kit retails at £599 new, asking £375 delivered
IMG-20180128-WA0007.jpg

Thanks for looking
Prit

Hi,
Do you have any more pictures showing the carbon in more detail?
Have seen some with lacquer peeling and bad scratches!

Also, assuming the adapter for the MAF sensor and everything required is included?

Thanks,
Daniel.

Re: Revolution Carbon Intake and Some other bits

Posted: Wed Jan 31, 2018 11:44 pm
by PritJutla
Intake has everything needed to fit it. The only thing you need will be two hose clamps (jubilee clips) for the hoses that attached to the red intake pipe.
More pics of the intake:
IMG_0128.JPG
IMG_0129.JPG
IMG_0130.JPG
IMG_0131.JPG
Prit

Re: Revolution Carbon Intake and Some other bits

Posted: Wed Jan 31, 2018 11:49 pm
by PritJutla
Got a chance to do some testing on the lights themselves. The lights themselves actually work. I think the one of the error canceller may have a fault. Might be repairable for someone.
Took some pics of the lights powered up, the reverse on these is a standard bulb.
Apologies for the crap picture quality, phone camera is up the duff and refuses to focus correctly at times
IMG_20180130_131708.jpg
IMG_20180130_144249.jpg
IMG_20180130_145128.jpg
IMG_20180130_145143.jpg
IMG_20180130_145303.jpg
IMG_20180130_145321.jpg
Prit

Re: Revolution Carbon Intake and Some other bits

Posted: Thu Feb 01, 2018 7:19 pm
by Stew
You have a pm 👍