Page 1 of 2
B7 RS4 Spacers wanted...
Posted: Mon Sep 29, 2014 8:06 pm
by JJ 1646
Just about to buy some spacers but thought i would check no one is getting rid. I am after
8mm front
10mm rear
Cash waiting let me know. Thanks Jay
Re: B7 RS4 Spacers wanted...
Posted: Tue Sep 30, 2014 5:49 am
by denboy1
Was thinking of getting these for the front on mine, if it's any help.
http://www.ebay.co.uk/itm/301331705669? ... EBIDX%3AIT
Den
Re: B7 RS4 Spacers wanted...
Posted: Tue Sep 30, 2014 9:54 am
by Revolution
They're not quite correct.
Drop a pm or call little glen on 0191 4619200 and well go through the options for you
Glenn
Re: B7 RS4 Spacers wanted...
Posted: Tue Sep 30, 2014 3:38 pm
by denboy1
Revolution wrote:They're not quite correct.
Drop a pm or call little glen on 0191 4619200 and well go through the options for you
Glenn
In what way are they not correct?
Re: B7 RS4 Spacers wanted...
Posted: Tue Sep 30, 2014 6:25 pm
by JJ 1646
Not hub centric pal have no lip for the wheel to sit on.
Re: B7 RS4 Spacers wanted...
Posted: Tue Sep 30, 2014 6:26 pm
by Revolution
The Eibach ones are not hub centric in (thinner widths) so you can end up with vibration issues as super difficult to get them located central on the hub.
We do sell a vast range of Eibach and fantastic product but H&R or Forge is the best way forward for an RS4.
Re: B7 RS4 Spacers wanted...
Posted: Tue Sep 30, 2014 8:49 pm
by denboy1
Revolution wrote:The Eibach ones are not hub centric in (thinner widths) so you can end up with vibration issues as super difficult to get them located central on the hub.
We do sell a vast range of Eibach and fantastic product but H&R or Forge is the best way forward for an RS4.
Could you drop me a pm then for a price on 8mm hubcentric with 10 longer bolts if needed. Thanks
Re: B7 RS4 Spacers wanted...
Posted: Tue Sep 30, 2014 9:36 pm
by J130YCE
denboy1 wrote:Revolution wrote:The Eibach ones are not hub centric in (thinner widths) so you can end up with vibration issues as super difficult to get them located central on the hub.
We do sell a vast range of Eibach and fantastic product but H&R or Forge is the best way forward for an RS4.
Could you drop me a pm then for a price on 8mm hubcentric with 10 longer bolts if needed. Thanks
Glenn, sent me one too.. Cheers
Re: B7 RS4 Spacers wanted...
Posted: Tue Sep 30, 2014 10:42 pm
by Revolution
Will do chaps, no problems
Re: B7 RS4 Spacers wanted...
Posted: Wed Oct 01, 2014 11:42 am
by Revolution
PM's sent as requested
CheeRS
Little Glen
Re: B7 RS4 Spacers wanted...
Posted: Wed Oct 01, 2014 9:37 pm
by denboy1
Have pm'ed back
Re: B7 RS4 Spacers wanted...
Posted: Thu Oct 02, 2014 9:16 am
by Revolution
denboy1 wrote:Have pm'ed back
Seen n replied
On the ball today.
CheeRS
Little Glen
Re: B7 RS4 Spacers wanted...
Posted: Thu Oct 02, 2014 8:37 pm
by JJ 1646
Heads up Eurocarparts H&R spacers 10mm £70
Re: B7 RS4 Spacers wanted...
Posted: Fri Oct 03, 2014 8:00 am
by Revolution
JJ 1646 wrote:Heads up Eurocarparts H&R spacers 10mm £70
1p more than us then
CheeRS
Little Glen
Re: B7 RS4 Spacers wanted...
Posted: Fri Oct 03, 2014 9:44 am
by JJ 1646
Damn it haha
managed to get them £65 in the end for 10mm and £70 12mm. Just hope i dont get any vibration that people complain about