10mm RS4 H&R spacers x4
Re: 10mm RS4 H&R spacers x4
Why wouldn't you just buy the right size ones? For me spigot rings are fine if you really want a set of wheels hat only come in a certain size, but there is no reason to buy the wrong size spacers when there are ones of the right size readily available. You are unnecesarily risking wheel wobble if you ask me, but yes I can't see why a spigot wouldn't work.
Re: 10mm RS4 H&R spacers x4
A spigot might get the spacer sitting nice and snug on the hub. However, if you have a wheel with a 57.1 centre bore, it won't go onto the spacer (unless it's an aftermarket wheel with a large centre bore that has been reduced with a spigot ring, that could be swapped).
Best to just get the correct spacers. If you don't want to fork out for H&R's, there are cheaper hubcentric spacers on eBay.
Best to just get the correct spacers. If you don't want to fork out for H&R's, there are cheaper hubcentric spacers on eBay.
Last edited by FaisalJ on Wed Jul 27, 2016 9:52 am, edited 1 time in total.
2007 RS4 B7 Avant
Phantom Black | Black Optics | MRC Stage 2 | JC Weldfab Exhaust | KW V3 coilovers | H&R ARBs | 20" Ispiri ISR-8 | Titanium wing mirrors | Driving Passion Diffuser | CF Air Intake | Manifold deflap | Alcantara/leather retrim | TT RS Steering Wheel | Pioneer Apple Carplay HU, JL amp and sub, Focal components | Clear Headlight Lenses, Black Internals, 6000K Bulbs | Trups LEDs | LED Tail lights |
-
RossDagley
- Top Gear
- Posts: 2334
- Joined: Mon Mar 17, 2014 11:53 pm
- Location: Bedford, UK
Re: 10mm RS4 H&R spacers x4
The B8 has the larger centre bore. So you could fit a spigot ring to the B7 and make the spacers fit, but how would you then fit your wheels to the (larger bore) spacers?Starry wrote:would they not work with a spigot ring?MikeFish wrote:Yes I think rspj posted a thread showing how they look on his car. Haven't you got a B7 anyway? These are for a B8 which has a bigger centre bore.
Believe only the man who has nothing to gain from what he says.
2017 BMW M4 Competition Pack - Mineral Grey - 530ps by bootmod3, JCWeldfab exhaust.
Previously:
Renault Megane R26 - Liquid Yellow - 275ps.
2015 Audi Exclusive RS4 B8 - Merlin Purple - JCWF Exhaust
2009 Audi RS6 C6 - Phantom Black - 730ps MRC Tuned
2008 Audi RS4 B7 - Phantom Black - 449ps MRC Tuned
2002 Peugeot 106 Gti - Mauritius blue - 430ps Home built.
2017 BMW M4 Competition Pack - Mineral Grey - 530ps by bootmod3, JCWeldfab exhaust.
Previously:
Renault Megane R26 - Liquid Yellow - 275ps.
2015 Audi Exclusive RS4 B8 - Merlin Purple - JCWF Exhaust
2009 Audi RS6 C6 - Phantom Black - 730ps MRC Tuned
2008 Audi RS4 B7 - Phantom Black - 449ps MRC Tuned
2002 Peugeot 106 Gti - Mauritius blue - 430ps Home built.
Re: 10mm RS4 H&R spacers x4
B8 wheels it is then.....RossDagley wrote:The B8 has the larger centre bore. So you could fit a spigot ring to the B7 and make the spacers fit, but how would you then fit your wheels to the (larger bore) spacers?Starry wrote:would they not work with a spigot ring?MikeFish wrote:Yes I think rspj posted a thread showing how they look on his car. Haven't you got a B7 anyway? These are for a B8 which has a bigger centre bore.
you talked me into it..to be honest i didn't see the b8 reference in the post so was the spigot was just me thinking out loud..
2006 RS4
Phantom black
MRC Stage 2, Milltek non res, pre cat delete,
Phantom black
MRC Stage 2, Milltek non res, pre cat delete,
Re: 10mm RS4 H&R spacers x4
Starry wrote: B8 wheels it is then.....
Re: 10mm RS4 H&R spacers x4
That sits just right..... 
2006 RS4
Phantom black
MRC Stage 2, Milltek non res, pre cat delete,
Phantom black
MRC Stage 2, Milltek non res, pre cat delete,
Re: 10mm RS4 H&R spacers x4
ThanksStarry wrote:That sits just right.....
FYI, that's with no spacers so if you go for a set of B8 RS alloys, whether it's the Rotors or the V spokes, you shouldn't need any spacers anyway (but you will need spigots).
Re: 10mm RS4 H&R spacers x4
Thanks for the info, I'm thinking of going with the S5 20" alloys, the ones that look like rs4 b7's. Stock look but a larger wheel.MikeFish wrote:ThanksStarry wrote:That sits just right.....
FYI, that's with no spacers so if you go for a set of B8 RS alloys, whether it's the Rotors or the V spokes, you shouldn't need any spacers anyway (but you will need spigots).
2006 RS4
Phantom black
MRC Stage 2, Milltek non res, pre cat delete,
Phantom black
MRC Stage 2, Milltek non res, pre cat delete,
Re: 10mm RS4 H&R spacers x4
Good choice, I nearly went for those to.
Who is online
Users browsing this forum: No registered users and 54 guests